From: Vladimir Sementsov-Ogievskiy <vsement...@virtuozzo.com>
Just use classes introduced in previous three commits. Behavior
difference is described in these three commits.
Drop group file, as it becomes unused.
Drop common.env: now check is in python, and for tests we use same
python interpreter that runs the check itself. Use build environment
PYTHON in check-block instead, to keep "make check" use the same
python.
Checking for virtio-blk moved to iotests.py, as it actually iotests.py
dependency. Actually not all python iotests depend on it, so in future
it may be refactored to checked only when really needed.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsement...@virtuozzo.com>
Message-Id: <20210125185056.129513-6-vsement...@virtuozzo.com>
Signed-off-by: Kevin Wolf <kw...@redhat.com>
---
tests/qemu-iotests/iotests.py | 8 +
Makefile | 1 -
tests/check-block.sh | 3 +-
tests/qemu-iotests/check | 1095 ++++--------------------------
tests/qemu-iotests/common.env.in | 3 -
tests/qemu-iotests/group | 323 ---------
tests/qemu-iotests/meson.build | 3 -
7 files changed, 139 insertions(+), 1297 deletions(-)
delete mode 100644 tests/qemu-iotests/common.env.in
delete mode 100644 tests/qemu-iotests/group
diff --git a/tests/qemu-iotests/iotests.py b/tests/qemu-iotests/iotests.py
index 335e6feb70..00be68eca3 100644
--- a/tests/qemu-iotests/iotests.py
+++ b/tests/qemu-iotests/iotests.py
@@ -1131,6 +1131,13 @@ def _verify_formats(required_formats: Sequence[str] =
()) -> None:
if usf_list:
notrun(f'formats {usf_list} are not whitelisted')
+
+def _verify_virtio_blk() -> None:
+ out = qemu_pipe('-M', 'none', '-device', 'help')
+ if 'virtio-blk' not in out:
+ notrun('Missing virtio-blk in QEMU binary')
+
+
def supports_quorum():
return 'quorum' in qemu_img_pipe('--help')
@@ -1308,6 +1315,7 @@ def execute_setup_common(supported_fmts: Sequence[str] =
(),
_verify_cache_mode(supported_cache_modes)
_verify_aio_mode(supported_aio_modes)
_verify_formats(required_fmts)
+ _verify_virtio_blk()
return debug
diff --git a/Makefile b/Makefile
index a380bbfa12..291ea19f2e 100644
--- a/Makefile
+++ b/Makefile
@@ -236,7 +236,6 @@ distclean: clean
rm -f config-host.mak config-host.h*
rm -f tests/tcg/config-*.mak
rm -f config-all-disas.mak config.status
- rm -f tests/qemu-iotests/common.env
rm -f roms/seabios/config.mak roms/vgabios/config.mak
rm -f qemu-plugins-ld.symbols qemu-plugins-ld64.symbols
rm -f *-config-target.h *-config-devices.mak *-config-devices.h
diff --git a/tests/check-block.sh b/tests/check-block.sh
index e4f37905be..f86cb863de 100755
--- a/tests/check-block.sh
+++ b/tests/check-block.sh
@@ -73,10 +73,11 @@ cd tests/qemu-iotests
# QEMU_CHECK_BLOCK_AUTO is used to disable some unstable sub-tests
export QEMU_CHECK_BLOCK_AUTO=1
+export PYTHONUTF8=1
ret=0
for fmt in $format_list ; do
- ./check -makecheck -$fmt $group || ret=1
+ ${PYTHON} ./check -makecheck -$fmt $group || ret=1
done
exit $ret
diff --git a/tests/qemu-iotests/check b/tests/qemu-iotests/check
index 952762d5ed..5190dee82e 100755
--- a/tests/qemu-iotests/check
+++ b/tests/qemu-iotests/check
@@ -1,7 +1,8 @@
-#!/usr/bin/env bash
+#!/usr/bin/env python3
#
-# Copyright (C) 2009 Red Hat, Inc.
-# Copyright (c) 2000-2002,2006 Silicon Graphics, Inc. All Rights Reserved.
+# Configure environment and run group of tests in it.
+#
+# Copyright (c) 2020-2021 Virtuozzo International GmbH
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
@@ -14,967 +15,129 @@
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
-#
-#
-# Control script for QA
-#
-
-status=0
-needwrap=true
-try=0
-n_bad=0
-bad=""
-notrun=""
-casenotrun=""
-interrupt=true
-makecheck=false
-
-_init_error()
-{
- echo "check: $1" >&2
- exit 1
-}
-
-if [ -L "$0" ]
-then
- # called from the build tree
- source_iotests=$(dirname "$(readlink "$0")")
- if [ -z "$source_iotests" ]
- then
- _init_error "failed to obtain source tree name from check symlink"
- fi
- source_iotests=$(cd "$source_iotests"; pwd) || _init_error "failed to
enter source tree"
- build_iotests=$(cd "$(dirname "$0")"; pwd)
-else
- # called from the source tree
- source_iotests=$PWD
- # this may be an in-tree build (note that in the following code we may not
- # assume that it truly is and have to test whether the build results
- # actually exist)
- build_iotests=$PWD
-fi
-
-build_root="$build_iotests/../.."
-
-# we need common.env
-if ! . "$build_iotests/common.env"
-then
- _init_error "failed to source common.env (make sure the qemu-iotests are
run from tests/qemu-iotests in the build tree)"
-fi
-
-# we need common.config
-if ! . "$source_iotests/common.config"
-then
- _init_error "failed to source common.config"
-fi
-
-_full_imgfmt_details()
-{
- if [ -n "$IMGOPTS" ]; then
- echo "$IMGFMT ($IMGOPTS)"
- else
- echo "$IMGFMT"
- fi
-}
-
-_full_platform_details()
-{
- os=$(uname -s)
- host=$(hostname -s)
- kernel=$(uname -r)
- platform=$(uname -m)
- echo "$os/$platform $host $kernel"
-}
-
-_full_env_details()
-{
- cat <<EOF
-QEMU -- "$QEMU_PROG" $QEMU_OPTIONS
-QEMU_IMG -- "$QEMU_IMG_PROG" $QEMU_IMG_OPTIONS
-QEMU_IO -- "$QEMU_IO_PROG" $QEMU_IO_OPTIONS
-QEMU_NBD -- "$QEMU_NBD_PROG" $QEMU_NBD_OPTIONS
-IMGFMT -- $FULL_IMGFMT_DETAILS
-IMGPROTO -- $IMGPROTO
-PLATFORM -- $FULL_HOST_DETAILS
-TEST_DIR -- $TEST_DIR
-SOCK_DIR -- $SOCK_DIR
-SOCKET_SCM_HELPER -- $SOCKET_SCM_HELPER
-
-EOF
-}
-
-# $1 = prog to look for
-set_prog_path()
-{
- p=$(command -v $1 2> /dev/null)
- if [ -n "$p" -a -x "$p" ]; then
- type -p "$p"
- else
- return 1
- fi
-}
-
-if [ -z "$TEST_DIR" ]; then
- TEST_DIR=$PWD/scratch
-fi
-mkdir -p "$TEST_DIR" || _init_error 'Failed to create TEST_DIR'
-
-tmp_sock_dir=false
-if [ -z "$SOCK_DIR" ]; then
- SOCK_DIR=$(mktemp -d)
- tmp_sock_dir=true
-fi
-mkdir -p "$SOCK_DIR" || _init_error 'Failed to create SOCK_DIR'
-
-diff="diff -u"
-verbose=false
-debug=false
-group=false
-xgroup=false
-imgopts=false
-showme=false
-sortme=false
-expunge=true
-have_test_arg=false
-cachemode=false
-aiomode=false
-
-tmp="${TEST_DIR}"/$$
-rm -f $tmp.list $tmp.tmp $tmp.sed
-
-export IMGFMT=raw
-export IMGFMT_GENERIC=true
-export IMGPROTO=file
-export IMGOPTS=""
-export CACHEMODE="writeback"
-export AIOMODE="threads"
-export QEMU_IO_OPTIONS=""
-export QEMU_IO_OPTIONS_NO_FMT=""
-export CACHEMODE_IS_DEFAULT=true
-export VALGRIND_QEMU=
-export IMGKEYSECRET=
-export IMGOPTSSYNTAX=false
-
-# Save current tty settings, since an aborting qemu call may leave things
-# screwed up
-STTY_RESTORE=
-if test -t 0; then
- STTY_RESTORE=$(stty -g)
-fi
-
-for r
-do
-
- if $group
- then
- # arg after -g
- group_list=$(sed -n <"$source_iotests/group" -e 's/$/ /' -e
"/^[0-9][0-9][0-9].* $r /"'{
-s/ .*//p
-}')
- if [ -z "$group_list" ]
- then
- echo "Group \"$r\" is empty or not defined?"
- exit 1
- fi
- [ ! -s $tmp.list ] && touch $tmp.list
- for t in $group_list
- do
- if grep -s "^$t\$" $tmp.list >/dev/null
- then
- :
- else
- echo "$t" >>$tmp.list
- fi
- done
- group=false
- continue
-
- elif $xgroup
- then
- # arg after -x
- # Populate $tmp.list with all tests
- awk '/^[0-9]{3,}/ {print $1}' "${source_iotests}/group" > $tmp.list
2>/dev/null
- group_list=$(sed -n <"$source_iotests/group" -e 's/$/ /' -e
"/^[0-9][0-9][0-9].* $r /"'{
-s/ .*//p
-}')
- if [ -z "$group_list" ]
- then
- echo "Group \"$r\" is empty or not defined?"
- exit 1
- fi
- numsed=0
- rm -f $tmp.sed
- for t in $group_list
- do
- if [ $numsed -gt 100 ]
- then
- sed -f $tmp.sed <$tmp.list >$tmp.tmp
- mv $tmp.tmp $tmp.list
- numsed=0
- rm -f $tmp.sed
- fi
- echo "/^$t\$/d" >>$tmp.sed
- numsed=$(expr $numsed + 1)
- done
- sed -f $tmp.sed <$tmp.list >$tmp.tmp
- mv $tmp.tmp $tmp.list
- xgroup=false
- continue
-
- elif $imgopts
- then
- IMGOPTS="$r"
- imgopts=false
- continue
- elif $cachemode
- then
- CACHEMODE="$r"
- CACHEMODE_IS_DEFAULT=false
- cachemode=false
- continue
- elif $aiomode
- then
- AIOMODE="$r"
- aiomode=false
- continue
- fi
-
- xpand=true
- case "$r"
- in
-
- -\? | -h | --help) # usage
- echo "Usage: $0 [options] [testlist]"'
-
-common options
- -v verbose
- -d debug
-
-image format options
- -raw test raw (default)
- -bochs test bochs
- -cloop test cloop
- -parallels test parallels
- -qcow test qcow
- -qcow2 test qcow2
- -qed test qed
- -vdi test vdi
- -vpc test vpc
- -vhdx test vhdx
- -vmdk test vmdk
- -luks test luks
- -dmg test dmg
-
-image protocol options
- -file test file (default)
- -rbd test rbd
- -sheepdog test sheepdog
- -nbd test nbd
- -fuse test fuse
- -ssh test ssh
- -nfs test nfs
-
-other options
- -xdiff graphical mode diff
- -nocache use O_DIRECT on backing file
- -misalign misalign memory allocations
- -n show me, do not run tests
- -o options -o options to pass to qemu-img create/convert
- -c mode cache mode
- -i mode AIO mode
- -makecheck pretty print output for make check
-
-testlist options
- -g group[,group...] include tests from these groups
- -x group[,group...] exclude tests from these groups
- NNN include test NNN
- NNN-NNN include test range (eg. 012-021)
-'
- exit 0
- ;;
-
- -raw)
- IMGFMT=raw
- xpand=false
- ;;
-
- -bochs)
- IMGFMT=bochs
- IMGFMT_GENERIC=false
- xpand=false
- ;;
-
- -cloop)
- IMGFMT=cloop
- IMGFMT_GENERIC=false
- xpand=false
- ;;
-
- -parallels)
- IMGFMT=parallels
- xpand=false
- ;;
-
- -qcow)
- IMGFMT=qcow
- xpand=false
- ;;
-
- -qcow2)
- IMGFMT=qcow2
- xpand=false
- ;;
-
- -luks)
- IMGOPTSSYNTAX=true
- IMGFMT=luks
- IMGKEYSECRET=123456
- xpand=false
- ;;
-
- -dmg)
- IMGFMT=dmg
- IMGFMT_GENERIC=false
- xpand=false
- ;;
-
- -qed)
- IMGFMT=qed
- xpand=false
- ;;
-
- -vdi)
- IMGFMT=vdi
- xpand=false
- ;;
-
- -vmdk)
- IMGFMT=vmdk
- xpand=false
- ;;
-
- -vpc)
- IMGFMT=vpc
- xpand=false
- ;;
-
- -vhdx)
- IMGFMT=vhdx
- xpand=false
- ;;
-
- -file)
- IMGPROTO=file
- xpand=false
- ;;
-
- -rbd)
- IMGPROTO=rbd
- xpand=false
- ;;
-
- -sheepdog)
- IMGPROTO=sheepdog
- xpand=false
- ;;
-
- -nbd)
- IMGPROTO=nbd
- xpand=false
- ;;
-
- -fuse)
- IMGPROTO=fuse
- xpand=false
- ;;
-
- -ssh)
- IMGPROTO=ssh
- xpand=false
- ;;
-
- -nfs)
- IMGPROTO=nfs
- xpand=false
- ;;
-
- -nocache)
- CACHEMODE="none"
- CACHEMODE_IS_DEFAULT=false
- xpand=false
- ;;
-
- -misalign)
- QEMU_IO_OPTIONS="$QEMU_IO_OPTIONS --misalign"
- xpand=false
- ;;
-
- -valgrind)
- VALGRIND_QEMU='y'
- xpand=false
- ;;
-
- -g) # -g group ... pick from group file
- group=true
- xpand=false
- ;;
-
- -xdiff) # graphical diff mode
- xpand=false
-
- if [ ! -z "$DISPLAY" ]
- then
- command -v xdiff >/dev/null 2>&1 && diff=xdiff
- command -v gdiff >/dev/null 2>&1 && diff=gdiff
- command -v tkdiff >/dev/null 2>&1 && diff=tkdiff
- command -v xxdiff >/dev/null 2>&1 && diff=xxdiff
- fi
- ;;
- -makecheck) # makecheck friendly output
- makecheck=true
- xpand=false
- ;;
- -n) # show me, don't do it
- showme=true
- xpand=false
- ;;
- -o)
- imgopts=true
- xpand=false
- ;;
- -c)
- cachemode=true
- xpand=false
- ;;
- -i)
- aiomode=true
- xpand=false
- ;;
- -T) # deprecated timestamp option
- xpand=false
- ;;
- -v)
- verbose=true
- xpand=false
- ;;
- -d)
- debug=true
- xpand=false
- ;;
- -x) # -x group ... exclude from group file
- xgroup=true
- xpand=false
- ;;
- '[0-9][0-9][0-9] [0-9][0-9][0-9][0-9]')
- echo "No tests?"
- status=1
- exit $status
- ;;
-
- [0-9]*-[0-9]*)
- eval $(echo $r | sed -e 's/^/start=/' -e 's/-/ end=/')
- ;;
-
- [0-9]*-)
- eval $(echo $r | sed -e 's/^/start=/' -e 's/-//')
- end=$(echo [0-9][0-9][0-9] [0-9][0-9][0-9][0-9] | sed -e
's/\[0-9]//g' -e 's/ *$//' -e 's/.* //')
- if [ -z "$end" ]
- then
- echo "No tests in range \"$r\"?"
- status=1
- exit $status
- fi
- ;;
-
- *)
- start=$r
- end=$r
- ;;
-
- esac
-
- # get rid of leading 0s as can be interpreted as octal
- start=$(echo $start | sed 's/^0*//')
- end=$(echo $end | sed 's/^0*//')
-
- if $xpand
- then
- have_test_arg=true
- awk </dev/null '
-BEGIN { for (t='$start'; t<='$end'; t++) printf "%03d\n",t }' \
- | while read id
- do
- if grep -s "^$id\( \|\$\)" "$source_iotests/group" >/dev/null
- then
- # in group file ... OK
- echo $id >>$tmp.list
- else
- if [ -f expunged ] && $expunge && egrep "^$id([ ]|\$)"
expunged >/dev/null
- then
- # expunged ... will be reported, but not run, later
- echo $id >>$tmp.list
- else
- # oops
- if [ "$start" == "$end" -a "$id" == "$end" ]
- then
- echo "$id - unknown test"
- exit 1
- else
- echo "$id - unknown test, ignored"
- fi
- fi
- fi
- done || exit 1
- fi
-
-done
-
-# Set qemu-io cache mode with $CACHEMODE we have
-QEMU_IO_OPTIONS="$QEMU_IO_OPTIONS --cache $CACHEMODE"
-# Set qemu-io aio mode with $AIOMODE we have
-QEMU_IO_OPTIONS="$QEMU_IO_OPTIONS --aio $AIOMODE"
-
-QEMU_IO_OPTIONS_NO_FMT="$QEMU_IO_OPTIONS"
-if [ "$IMGOPTSSYNTAX" != "true" ]; then
- QEMU_IO_OPTIONS="$QEMU_IO_OPTIONS -f $IMGFMT"
-fi
-
-# Set default options for qemu-img create -o if they were not specified
-if [ "$IMGFMT" == "qcow2" ] && ! (echo "$IMGOPTS" | grep "compat=" >
/dev/null); then
- IMGOPTS=$(_optstr_add "$IMGOPTS" "compat=1.1")
-fi
-if [ "$IMGFMT" == "luks" ] && ! (echo "$IMGOPTS" | grep "iter-time=" >
/dev/null); then
- IMGOPTS=$(_optstr_add "$IMGOPTS" "iter-time=10")
-fi
-if [ "$IMGFMT" == "vmdk" ] && ! (echo "$IMGOPTS" | grep "zeroed_grain=" >
/dev/null); then
- IMGOPTS=$(_optstr_add "$IMGOPTS" "zeroed_grain=on")
-fi
-
-if [ -z "$SAMPLE_IMG_DIR" ]; then
- SAMPLE_IMG_DIR="$source_iotests/sample_images"
-fi
-
-export TEST_DIR
-export SOCK_DIR
-export SAMPLE_IMG_DIR
-
-if [ -s $tmp.list ]
-then
- # found some valid test numbers ... this is good
- :
-else
- if $have_test_arg
- then
- # had test numbers, but none in group file ... do nothing
- touch $tmp.list
- else
- # no test numbers, do everything from group file
- sed -n -e '/^[0-9][0-9][0-9]*/s/^\([0-9]*\).*/\1/p'
<"$source_iotests/group" >$tmp.list
- fi
-fi
-
-# should be sort -n, but this did not work for Linux when this
-# was ported from IRIX
-#
-list=$(sort $tmp.list)
-rm -f $tmp.list $tmp.tmp $tmp.sed
-
-if [ -z "$QEMU_PROG" ]
-then
- if [ -x "$build_iotests/qemu" ]; then
- export QEMU_PROG="$build_iotests/qemu"
- elif [ -x "$build_root/qemu-system-${qemu_arch}" ]; then
- export QEMU_PROG="$build_root/qemu-system-${qemu_arch}"
- else
- pushd "$build_root" > /dev/null
- for binary in qemu-system-*
- do
- if [ -x "$binary" ]
- then
- export QEMU_PROG="$build_root/$binary"
- break
- fi
- done
- popd > /dev/null
- [ "$QEMU_PROG" = "" ] && _init_error "qemu not found"
- fi
-fi
-export QEMU_PROG="$(type -p "$QEMU_PROG")"
-
-export QEMU_OPTIONS="-nodefaults -display none -accel qtest"
-case "$QEMU_PROG" in
- *qemu-system-arm|*qemu-system-aarch64)
- export QEMU_OPTIONS="$QEMU_OPTIONS -machine virt"
- ;;
- *qemu-system-avr)
- export QEMU_OPTIONS="$QEMU_OPTIONS -machine mega2560"
- ;;
- *qemu-system-rx)
- export QEMU_OPTIONS="$QEMU_OPTIONS -machine gdbsim-r5f562n8"
- ;;
- *qemu-system-tricore)
- export QEMU_OPTIONS="-$QEMU_OPTIONS -machine tricore_testboard"
- ;;
-esac
-
-if [ -z "$QEMU_IMG_PROG" ]; then
- if [ -x "$build_iotests/qemu-img" ]; then
- export QEMU_IMG_PROG="$build_iotests/qemu-img"
- elif [ -x "$build_root/qemu-img" ]; then
- export QEMU_IMG_PROG="$build_root/qemu-img"
- else
- _init_error "qemu-img not found"
- fi
-fi
-export QEMU_IMG_PROG="$(type -p "$QEMU_IMG_PROG")"
-
-if [ -z "$QEMU_IO_PROG" ]; then
- if [ -x "$build_iotests/qemu-io" ]; then
- export QEMU_IO_PROG="$build_iotests/qemu-io"
- elif [ -x "$build_root/qemu-io" ]; then
- export QEMU_IO_PROG="$build_root/qemu-io"
- else
- _init_error "qemu-io not found"
- fi
-fi
-export QEMU_IO_PROG="$(type -p "$QEMU_IO_PROG")"
-
-if [ -z $QEMU_NBD_PROG ]; then
- if [ -x "$build_iotests/qemu-nbd" ]; then
- export QEMU_NBD_PROG="$build_iotests/qemu-nbd"
- elif [ -x "$build_root/qemu-nbd" ]; then
- export QEMU_NBD_PROG="$build_root/qemu-nbd"
- else
- _init_error "qemu-nbd not found"
- fi
-fi
-export QEMU_NBD_PROG="$(type -p "$QEMU_NBD_PROG")"
-
-if [ -z "$QSD_PROG" ]; then
- if [ -x "$build_iotests/qemu-storage-daemon" ]; then
- export QSD_PROG="$build_iotests/qemu-storage-daemon"
- elif [ -x "$build_root/storage-daemon/qemu-storage-daemon" ]; then
- export QSD_PROG="$build_root/storage-daemon/qemu-storage-daemon"
- else
- _init_error "qemu-storage-daemon not found"
- fi
-fi
-export QSD_PROG="$(type -p "$QSD_PROG")"
-
-if [ -x "$build_iotests/socket_scm_helper" ]
-then
- export SOCKET_SCM_HELPER="$build_iotests/socket_scm_helper"
-fi
-
-python_usable=false
-if $PYTHON -c 'import sys; sys.exit(0 if sys.version_info >= (3,6) else 1)'
-then
- # Our python framework also requires virtio-blk
- if "$QEMU_PROG" -M none -device help | grep -q virtio-blk >/dev/null 2>&1
- then
- python_usable=true
- else
- python_unusable_because="Missing virtio-blk in QEMU binary"
- fi
-else
- python_unusable_because="Unsupported Python version"
-fi
-
-default_machine=$($QEMU_PROG -machine help | sed -n '/(default)/ s/ .*//p')
-default_alias_machine=$($QEMU_PROG -machine help | \
- sed -n "/(alias of $default_machine)/ { s/ .*//p; q; }")
-if [[ "$default_alias_machine" ]]; then
- default_machine="$default_alias_machine"
-fi
-
-export QEMU_DEFAULT_MACHINE="$default_machine"
-
-TIMESTAMP_FILE=check.time-$IMGPROTO-$IMGFMT
-
-_wallclock()
-{
- date "+%H %M %S" | awk '{ print $1*3600 + $2*60 + $3 }'
-}
-
-_wrapup()
-{
- if $showme
- then
- :
- elif $needwrap
- then
- if [ -f $TIMESTAMP_FILE -a -f $tmp.time ]
- then
- cat $TIMESTAMP_FILE $tmp.time \
- | awk '
- { t[$1] = $2 }
-END { if (NR > 0) {
- for (i in t) print i " " t[i]
- }
- }' \
- | sort -n >$tmp.out
- mv $tmp.out $TIMESTAMP_FILE
- fi
-
- if [ -f $tmp.expunged ]
- then
- notrun=$(wc -l <$tmp.expunged | sed -e 's/ *//g')
- try=$(expr $try - $notrun)
- list=$(echo "$list" | sed -f $tmp.expunged)
- fi
-
- echo "" >>check.log
- date >>check.log
- echo $list | fmt | sed -e 's/^/ /' >>check.log
- $interrupt && echo "Interrupted!" >>check.log
-
- if [ ! -z "$notrun" ]
- then
- echo "Not run:$notrun"
- echo "Not run:$notrun" >>check.log
- fi
- if [ ! -z "$casenotrun" ]
- then
- echo "Some cases not run in:$casenotrun"
- echo "Some cases not run in:$casenotrun" >>check.log
- fi
- if [ ! -z "$n_bad" -a $n_bad != 0 ]
- then
- echo "Failures:$bad"
- echo "Failed $n_bad of $try iotests"
- echo "Failures:$bad" | fmt >>check.log
- echo "Failed $n_bad of $try iotests" >>check.log
- else
- echo "Passed all $try iotests"
- echo "Passed all $try iotests" >>check.log
- fi
- needwrap=false
- fi
-
- if test -n "$STTY_RESTORE"; then
- stty $STTY_RESTORE
- fi
- rm -f "${TEST_DIR}"/*.out "${TEST_DIR}"/*.err "${TEST_DIR}"/*.time
- rm -f "${TEST_DIR}"/check.pid "${TEST_DIR}"/check.sts
- rm -f $tmp.*
-
- if $tmp_sock_dir
- then
- rm -rf "$SOCK_DIR"
- fi
-}
-
-trap "_wrapup; exit \$status" 0 1 2 3 15
-
-# Report the test start and results. For makecheck we want to pretty
-# print the whole report at the end of the execution.
-# args: $seq, $starttime, $lasttime
-_report_test_start()
-{
- if ! $makecheck; then
- if [ -n "$3" ]; then
- local lasttime=" (last: $3s)"
- fi
- printf "%-8s %-10s [%s] %4s%-14s\r" "$1" "..." "$2" "..."
"$lasttime"
- fi
-}
-# args:$seq $status $starttime $lasttime $thistime $details
-_report_test_result()
-{
- local status lasttime thistime
- if $makecheck; then
- if [ -n "$2" ] && [ "$2" != "pass" ]; then
- status=" [$2]"
- fi
- printf " TEST iotest-$IMGFMT: %s%s\n" "$1" "$status"
- return
- fi
-
- if [ -n "$4" ]; then
- lasttime=" (last: $4s)"
- fi
- if [ -n "$5" ]; then
- thistime=" $5s"
- fi
- case "$2" in
- "pass") status=$(printf "\e[32m%-10s\e[0m" "$2") ;;
- "fail") status=$(printf "\e[1m\e[31m%-10s\e[0m" "$2") ;;
- "not run") status=$(printf "\e[33m%-10s\e[0m" "$2") ;;
- *) status=$(printf "%-10s" "$2") ;;
- esac
-
- printf "%-8s %s [%s] [%s] %4s%-14s %s\n" "$1" "$status" "$3" "$(date
'+%T')" "$thistime" "$lasttime" "$6"
-}
-
-[ -f $TIMESTAMP_FILE ] || touch $TIMESTAMP_FILE
-
-FULL_IMGFMT_DETAILS=$(_full_imgfmt_details)
-FULL_HOST_DETAILS=$(_full_platform_details)
-
-if ! $makecheck; then
- _full_env_details
-fi
-
-seq="check"
-
-[ -n "$TESTS_REMAINING_LOG" ] && echo $list > $TESTS_REMAINING_LOG
-
-for seq in $list
-do
- err=false # error flag
- printdiff=false # show diff to reference output?
- status="" # test result summary
- results="" # test result details
- thistime="" # time the test took
-
- if [ -n "$TESTS_REMAINING_LOG" ] ; then
- sed -e "s/$seq//" -e 's/ / /' -e 's/^ *//' $TESTS_REMAINING_LOG >
$TESTS_REMAINING_LOG.tmp
- mv $TESTS_REMAINING_LOG.tmp $TESTS_REMAINING_LOG
- sync
- fi
-
- lasttime=$(sed -n -e "/^$seq /s/.* //p" <$TIMESTAMP_FILE)
- starttime=$(date "+%T")
- _report_test_start $seq $starttime $lasttime
-
- if $showme
- then
- status="not run"
- elif [ -f expunged ] && $expunge && egrep "^$seq([ ]|\$)" expunged
>/dev/null
- then
- status="not run"
- results="expunged"
- rm -f $seq.out.bad
- echo "/^$seq\$/d" >>$tmp.expunged
- elif [ ! -f "$source_iotests/$seq" ]
- then
- status="not run"
- results="no such test?"
- echo "/^$seq\$/d" >>$tmp.expunged
- else
- # really going to try and run this one
- #
- rm -f $seq.out.bad
- rm -f core $seq.notrun
- rm -f $seq.casenotrun
-
- start=$(_wallclock)
-
- if [ "$(head -n 1 "$source_iotests/$seq")" == "#!/usr/bin/env python3"
]; then
- if $python_usable; then
- run_command="$PYTHON $seq"
- else
- run_command="false"
- echo "$python_unusable_because" > $seq.notrun
- fi
- else
- run_command="./$seq"
- fi
- export OUTPUT_DIR=$PWD
- if $debug; then
- (cd "$source_iotests";
- MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(($RANDOM % 255 + 1))} \
- $run_command -d 2>&1 | tee $tmp.out)
- else
- (cd "$source_iotests";
- MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(($RANDOM % 255 + 1))} \
- $run_command >$tmp.out 2>&1)
- fi
- sts=$?
- stop=$(_wallclock)
-
- if [ -f core ]
- then
- mv core $seq.core
- status="fail"
- results="[dumped core] $seq.core"
- err=true
- fi
-
- if [ -f $seq.notrun ]
- then
- # overwrites timestamp output
- status="not run"
- results="$(cat $seq.notrun)"
- else
- if [ $sts -ne 0 ]
- then
- status="fail"
- results=$(printf %s "[failed, exit status $sts]")
- err=true
- fi
-
- reference="$source_iotests/$seq.out"
- reference_machine="$source_iotests/$seq.$QEMU_DEFAULT_MACHINE.out"
- if [ -f "$reference_machine" ]; then
- reference="$reference_machine"
- fi
-
- reference_format="$source_iotests/$seq.out.$IMGFMT"
- if [ -f "$reference_format" ]; then
- reference="$reference_format"
- fi
-
- if [ "$CACHEMODE" = "none" ]; then
- [ -f "$source_iotests/$seq.out.nocache" ] &&
reference="$source_iotests/$seq.out.nocache"
- fi
-
- if [ ! -f "$reference" ]
- then
- status="fail"
- results="no qualified output"
- err=true
- else
- if diff -w "$reference" $tmp.out >/dev/null 2>&1
- then
- if ! $err; then
- status="pass"
- thistime=$(expr $stop - $start)
- echo "$seq $thistime" >>$tmp.time
- fi
- else
- mv $tmp.out $seq.out.bad
- status="fail"
- results="output mismatch (see $seq.out.bad)"
- printdiff=true
- err=true
- fi
- fi
- fi
- if [ -f $seq.casenotrun ]
- then
- cat $seq.casenotrun
- casenotrun="$casenotrun $seq"
- fi
- fi
-
- # come here for each test, except when $showme is true
- #
- _report_test_result $seq "$status" "$starttime" "$lasttime" "$thistime"
"$results"
- case "$status" in
- "pass")
- try=$(expr $try + 1)
- ;;
- "fail")
- try=$(expr $try + 1)
- if $makecheck; then
- _full_env_details
- fi
- if $printdiff; then
- $diff -w "$reference" "$PWD"/$seq.out.bad
- fi
- bad="$bad $seq"
- n_bad=$(expr $n_bad + 1)
- quick=false
- ;;
- "not run")
- notrun="$notrun $seq"
- ;;
- esac
-
- seq="after_$seq"
-done
-interrupt=false
-status=$(expr $n_bad)
-exit
+import os
+import sys
+import argparse
+from findtests import TestFinder
+from testenv import TestEnv
+from testrunner import TestRunner
+
+
+def make_argparser() -> argparse.ArgumentParser:
+ p = argparse.ArgumentParser(description="Test run options")
+
+ p.add_argument('-n', '--dry-run', action='store_true',
+ help='show me, do not run tests')
+ p.add_argument('-makecheck', action='store_true',
+ help='pretty print output for make check')
+
+ p.add_argument('-d', dest='debug', action='store_true', help='debug')
+ p.add_argument('-misalign', action='store_true',
+ help='misalign memory allocations')
+ p.add_argument('--color', choices=['on', 'off', 'auto'],
+ default='auto', help="use terminal colors. The default "
+ "'auto' value means use colors if terminal stdout detected")
+
+ g_env = p.add_argument_group('test environment options')
+ mg = g_env.add_mutually_exclusive_group()
+ # We don't set default for cachemode, as we need to distinguish default
+ # from user input later.
+ mg.add_argument('-nocache', dest='cachemode', action='store_const',
+ const='none', help='set cache mode "none" (O_DIRECT), '
+ 'sets CACHEMODE environment variable')
+ mg.add_argument('-c', dest='cachemode',
+ help='sets CACHEMODE environment variable')
+
+ g_env.add_argument('-i', dest='aiomode', default='threads',
+ help='sets AIOMODE environment variable')
+
+ p.set_defaults(imgfmt='raw', imgproto='file')
+
+ format_list = ['raw', 'bochs', 'cloop', 'parallels', 'qcow', 'qcow2',
+ 'qed', 'vdi', 'vpc', 'vhdx', 'vmdk', 'luks', 'dmg']
+ g_fmt = p.add_argument_group(
+ ' image format options',
+ 'The following options set the IMGFMT environment variable. '
+ 'At most one choice is allowed, default is "raw"')
+ mg = g_fmt.add_mutually_exclusive_group()
+ for fmt in format_list:
+ mg.add_argument('-' + fmt, dest='imgfmt', action='store_const',
+ const=fmt, help=f'test {fmt}')
+
+ protocol_list = ['file', 'rbd', 'sheepdog', 'nbd', 'ssh', 'nfs',
+ 'fuse']
+ g_prt = p.add_argument_group(
+ ' image protocol options',
+ 'The following options set the IMGPROTO environment variable. '
+ 'At most one choice is allowed, default is "file"')
+ mg = g_prt.add_mutually_exclusive_group()
+ for prt in protocol_list:
+ mg.add_argument('-' + prt, dest='imgproto', action='store_const',
+ const=prt, help=f'test {prt}')
+
+ g_bash = p.add_argument_group('bash tests options',
+ 'The following options are ignored by '
+ 'python tests.')
+ # TODO: make support for the following options in iotests.py
+ g_bash.add_argument('-o', dest='imgopts',
+ help='options to pass to qemu-img create/convert, '
+ 'sets IMGOPTS environment variable')
+ g_bash.add_argument('-valgrind', action='store_true',
+ help='use valgrind, sets VALGRIND_QEMU environment '
+ 'variable')
+
+ g_sel = p.add_argument_group('test selecting options',
+ 'The following options specify test set '
+ 'to run.')
+ g_sel.add_argument('-g', '--groups', metavar='group1,...',
+ help='include tests from these groups')
+ g_sel.add_argument('-x', '--exclude-groups', metavar='group1,...',
+ help='exclude tests from these groups')
+ g_sel.add_argument('--start-from', metavar='TEST',
+ help='Start from specified test: make sorted sequence '
+ 'of tests as usual and then drop tests from the first '
+ 'one to TEST (not inclusive). This may be used to '
+ 'rerun failed ./check command, starting from the '
+ 'middle of the process.')
+ g_sel.add_argument('tests', metavar='TEST_FILES', nargs='*',
+ help='tests to run')
+
+ return p
+
+
+if __name__ == '__main__':
+ args = make_argparser().parse_args()
+
+ env = TestEnv(imgfmt=args.imgfmt, imgproto=args.imgproto,
+ aiomode=args.aiomode, cachemode=args.cachemode,
+ imgopts=args.imgopts, misalign=args.misalign,
+ debug=args.debug, valgrind=args.valgrind)
+
+ testfinder = TestFinder(test_dir=env.source_iotests)
+
+ groups = args.groups.split(',') if args.groups else None
+ x_groups = args.exclude_groups.split(',') if args.exclude_groups else None
+
+ group_local = os.path.join(env.source_iotests, 'group.local')
+ if os.path.isfile(group_local):
+ try:
+ testfinder.add_group_file(group_local)
+ except ValueError as e:
+ sys.exit(f"Failed to parse group file '{group_local}': {e}")
+
+ try:
+ tests = testfinder.find_tests(groups=groups, exclude_groups=x_groups,
+ tests=args.tests,
+ start_from=args.start_from)
+ if not tests:
+ raise ValueError('No tests selected')
+ except ValueError as e:
+ sys.exit(e)
+
+ if args.dry_run:
+ print('\n'.join(tests))
+ else:
+ with TestRunner(env, makecheck=args.makecheck,
+ color=args.color) as tr:
+ tr.run_tests([os.path.join(env.source_iotests, t) for t in tests])
diff --git a/tests/qemu-iotests/common.env.in b/tests/qemu-iotests/common.env.in
deleted file mode 100644
index e565cdf40c..0000000000
--- a/tests/qemu-iotests/common.env.in
+++ /dev/null
@@ -1,3 +0,0 @@
-# Automatically generated by configure - do not modify
-
-export PYTHON='@PYTHON@'
diff --git a/tests/qemu-iotests/group b/tests/qemu-iotests/group
deleted file mode 100644
index a0d0bf1688..0000000000
--- a/tests/qemu-iotests/group
+++ /dev/null
@@ -1,323 +0,0 @@
-#
-# QA groups control file
-# Defines test groups
-#
-# Some notes about the groups:
-#
-# - do not start group names with a digit
-#
-# - quick : Tests in this group should finish within some few seconds.
-#
-# - img : Tests in this group can be used to excercise the qemu-img tool.
-#
-# - auto : Tests in this group are used during "make check" and should be
-# runnable in any case. That means they should run with every QEMU binary
-# (also non-x86), with every QEMU configuration (i.e. must not fail if
-# an optional feature is not compiled in - but reporting a "skip" is ok),
-# work at least with the qcow2 file format, work with all kind of host
-# filesystems and users (e.g. "nobody" or "root") and must not take too
-# much memory and disk space (since CI pipelines tend to fail otherwise).
-#
-
-#
-# test-group association ... one line per test
-#
-001 rw auto quick
-002 rw auto quick
-003 rw auto
-004 rw auto quick
-005 img auto quick
-# 006 was removed, do not reuse
-007 snapshot auto
-008 rw auto quick
-009 rw auto quick
-010 rw auto quick
-011 rw auto quick
-012 auto quick
-013 rw auto
-014 rw
-015 rw snapshot
-# 016 was removed, do not reuse
-017 rw backing auto quick
-018 rw backing auto quick
-019 rw backing auto quick
-020 rw backing auto quick
-021 io auto quick
-022 rw snapshot auto
-023 rw
-024 rw backing auto quick
-025 rw auto quick
-026 rw blkdbg
-027 rw auto quick
-028 rw backing quick
-029 rw auto quick
-030 rw auto backing
-031 rw auto quick
-032 rw auto quick
-033 rw auto quick
-034 rw auto backing quick
-035 rw auto quick
-036 rw auto quick
-037 rw auto backing quick
-038 rw auto backing quick
-039 rw auto quick
-040 rw auto
-041 rw auto backing
-042 rw auto quick
-043 rw auto backing
-044 rw
-045 rw quick
-046 rw auto aio quick
-047 rw auto quick
-048 img auto quick
-049 rw auto
-050 rw auto backing quick
-051 rw
-052 rw auto backing quick
-053 rw auto quick
-054 rw auto quick
-055 rw
-056 rw backing
-057 rw
-058 rw quick
-059 rw quick
-060 rw auto quick
-061 rw auto
-062 rw auto quick
-063 rw auto quick
-064 rw quick
-065 rw quick
-066 rw auto quick
-# 067 was removed, do not reuse
-068 rw quick
-069 rw auto quick
-070 rw quick
-071 rw auto quick
-072 rw auto quick
-073 rw auto quick
-074 rw auto quick
-075 rw quick
-076 io
-077 rw quick
-078 rw quick
-079 rw auto
-080 rw auto
-081 rw quick
-082 rw quick
-083 rw
-084 img quick
-085 rw
-086 rw auto quick
-087 rw quick
-088 rw quick
-089 rw auto quick
-090 rw auto quick
-091 rw migration quick
-092 rw quick
-093 throttle
-094 rw quick
-095 rw quick
-096 rw quick
-097 rw auto backing
-098 rw auto backing quick
-099 rw auto quick
-# 100 was removed, do not reuse
-101 rw quick
-102 rw quick
-103 rw auto quick
-104 rw auto
-105 rw auto quick
-106 rw quick
-107 rw auto quick
-108 rw auto quick
-109 rw
-110 rw auto backing quick
-111 rw auto quick
-112 rw
-113 rw quick
-114 rw auto quick
-115 rw
-116 rw quick
-117 rw auto
-118 rw
-119 rw quick
-120 rw auto quick
-121 rw
-122 rw
-123 rw quick
-124 rw backing
-125 rw
-126 rw auto backing
-127 rw auto backing quick
-128 rw quick
-129 rw quick
-130 rw quick
-131 rw quick
-132 rw quick
-133 auto quick
-134 rw auto quick
-135 rw
-136 rw
-137 rw auto
-138 rw auto quick
-139 rw quick
-140 rw auto quick
-141 rw auto quick
-142
-143 auto quick
-144 rw quick
-145 quick
-146 quick
-147 img
-148 rw quick
-149 rw sudo
-150 rw auto quick
-151 rw
-152 rw quick
-153 rw quick
-154 rw auto backing quick
-155 rw
-156 rw auto quick
-157 quick
-158 rw auto quick
-159 rw auto quick
-160 rw quick
-161 rw auto quick
-162 quick
-163 rw
-165 rw quick
-169 rw migration
-170 rw auto quick
-171 rw quick
-172 auto
-173 rw
-174 auto
-175 quick
-176 rw auto backing
-177 rw auto quick
-178 img
-179 rw auto quick
-181 rw auto migration quick
-182 rw quick
-183 rw migration quick
-184 rw auto quick
-185 rw
-186 rw auto
-187 rw auto
-188 rw quick
-189 rw
-190 rw auto quick
-191 rw auto
-192 rw auto quick
-194 rw migration quick
-195 rw auto quick
-196 rw quick migration
-197 rw quick
-198 rw
-199 rw migration
-200 rw
-201 rw migration quick
-202 rw quick
-203 rw auto migration quick
-204 rw quick
-205 rw quick
-206 rw
-207 rw
-208 rw quick
-209 rw quick
-210 rw
-211 rw quick
-212 rw quick
-213 rw quick
-214 rw auto
-215 rw quick
-216 rw quick
-217 rw auto quick
-218 rw quick
-219 rw
-220 rw auto
-221 rw quick
-222 rw quick
-223 rw quick
-224 rw quick
-225 rw quick
-226 auto quick
-227 quick
-228 rw quick
-229 auto quick
-231 quick
-232 quick
-233 quick
-234 quick migration
-235 quick
-236 quick
-237 rw quick
-238 quick
-239 rw quick
-240 quick
-241 rw quick
-242 rw quick
-243 rw quick
-244 rw auto quick
-245 rw
-246 rw quick
-247 rw quick
-248 rw quick
-249 rw auto quick
-250 rw quick
-251 rw auto quick
-252 rw auto backing quick
-253 rw quick
-254 rw backing quick
-255 rw quick
-256 rw auto quick
-257 rw
-258 rw quick
-259 rw auto quick
-260 rw quick
-261 rw
-262 rw quick migration
-263 rw quick
-264 rw
-265 rw auto quick
-266 rw quick
-267 rw auto quick snapshot
-268 rw auto quick
-270 rw backing quick
-271 rw auto
-272 rw
-273 backing quick
-274 rw backing
-277 rw quick
-279 rw backing quick
-280 rw migration quick
-281 rw quick
-282 rw img quick
-283 auto quick
-284 rw
-286 rw quick
-287 auto quick
-288 quick
-289 rw quick
-290 rw auto quick
-291 rw quick
-292 rw auto quick
-293 rw
-294 rw quick
-295 rw
-296 rw
-297 meta
-298
-299 auto quick
-300 migration
-301 backing quick
-302 quick
-303 rw quick
-304 rw quick
-305 rw quick
-307 rw quick export
-308 rw
-309 rw auto quick
-310 rw quick
-312 rw quick
-313 rw auto quick
diff --git a/tests/qemu-iotests/meson.build b/tests/qemu-iotests/meson.build
index 26658ce25c..67aed1e492 100644
--- a/tests/qemu-iotests/meson.build
+++ b/tests/qemu-iotests/meson.build
@@ -3,6 +3,3 @@ if 'CONFIG_LINUX' in config_host
else
socket_scm_helper = []
endif
-configure_file(output: 'common.env',
- input: files('common.env.in'),
- configuration: {'PYTHON': python.full_path()})
--
2.29.2
