Hi Philippe, On Mon, Feb 8, 2021 at 10:08 PM Philippe Mathieu-Daudé <f4...@amsat.org> wrote: > > On 1/28/21 7:30 AM, Bin Meng wrote: > > From: Bin Meng <bin.m...@windriver.com> > > > > Besides CMD12, the following command's reponse type is R1b: > > > > - SET_WRITE_PROT (CMD28) > > - CLR_WRITE_PROT (CMD29) > > - ERASE (CMD38) > > > > Reuse the same s->stopping to indicate a R1b reponse is needed. > > > > Signed-off-by: Bin Meng <bin.m...@windriver.com> > > > > --- > > > > Changes in v4: > > - new patch: handle the rest commands with R1b response type > > > > hw/sd/ssi-sd.c | 6 ++++++ > > 1 file changed, 6 insertions(+) > > > > diff --git a/hw/sd/ssi-sd.c b/hw/sd/ssi-sd.c > > index 907d681d19..97ee58e20c 100644 > > --- a/hw/sd/ssi-sd.c > > +++ b/hw/sd/ssi-sd.c > > @@ -194,6 +194,12 @@ static uint32_t ssi_sd_transfer(SSIPeripheral *dev, > > uint32_t val) > > /* CMD13 returns a 2-byte statuse work. Other commands > > only return the first byte. */ > > s->arglen = (s->cmd == 13) ? 2 : 1; > > + > > + /* handle R1b */ > > + if (s->cmd == 28 || s->cmd == 29 || s->cmd == 38) { > > Why not also check CMD13 for completeness? >
I am not sure I got your point. CMD13 does not respond with R1b but R2. > Otherwise: > Reviewed-by: Philippe Mathieu-Daudé <f4...@amsat.org> > > > + s->stopping = 1; > > + } > > + > > cardstatus = ldl_be_p(longresp); > > status = 0; > > if (((cardstatus >> 9) & 0xf) < 4) > > Regards, Bin