At the end of sdhci_send_command(), it starts a data transfer if the command register indicates data is associated. But the data transfer should only be initiated when the command execution has succeeded.
With this fix, the following reproducer: outl 0xcf8 0x80001810 outl 0xcfc 0xe1068000 outl 0xcf8 0x80001804 outw 0xcfc 0x7 write 0xe106802c 0x1 0x0f write 0xe1068004 0xc 0x2801d10101fffffbff28a384 write 0xe106800c 0x1f 0x9dacbbcad9e8f7061524334251606f7e8d9cabbac9d8e7f60514233241505f write 0xe1068003 0x28 0x80d000251480d000252280d000253080d000253e80d000254c80d000255a80d000256880d0002576 write 0xe1068003 0x1 0xfe cannot be reproduced with the following QEMU command line: $ qemu-system-x86_64 -nographic -M pc-q35-5.0 \ -device sdhci-pci,sd-spec-version=3 \ -drive if=sd,index=0,file=null-co://,format=raw,id=mydrive \ -device sd-card,drive=mydrive \ -monitor none -serial none -qtest stdio Cc: qemu-sta...@nongnu.org Fixes: CVE-2020-17380 Fixes: CVE-2020-25085 Fixes: CVE-2021-3409 Fixes: d7dfca0807a0 ("hw/sdhci: introduce standard SD host controller") Reported-by: Alexander Bulekov <alx...@bu.edu> Reported-by: Cornelius Aschermann (Ruhr-University Bochum) Reported-by: Muhammad Ramdhan Reported-by: Sergej Schumilo (Ruhr-University Bochum) Reported-by: Simon Wrner (Ruhr-University Bochum) Buglink: https://bugs.launchpad.net/qemu/+bug/1892960 Buglink: https://bugs.launchpad.net/qemu/+bug/1909418 Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1928146 Signed-off-by: Bin Meng <bmeng...@gmail.com> Acked-by: Alistair Francis <alistair.fran...@wdc.com> Tested-by: Alexander Bulekov <alx...@bu.edu> Tested-by: Philippe Mathieu-Daudé <f4...@amsat.org> --- hw/sd/sdhci.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c index 8ffa539..1c5ab26 100644 --- a/hw/sd/sdhci.c +++ b/hw/sd/sdhci.c @@ -326,6 +326,7 @@ static void sdhci_send_command(SDHCIState *s) SDRequest request; uint8_t response[16]; int rlen; + bool timeout = false; s->errintsts = 0; s->acmd12errsts = 0; @@ -349,6 +350,7 @@ static void sdhci_send_command(SDHCIState *s) trace_sdhci_response16(s->rspreg[3], s->rspreg[2], s->rspreg[1], s->rspreg[0]); } else { + timeout = true; trace_sdhci_error("timeout waiting for command response"); if (s->errintstsen & SDHC_EISEN_CMDTIMEOUT) { s->errintsts |= SDHC_EIS_CMDTIMEOUT; @@ -369,7 +371,7 @@ static void sdhci_send_command(SDHCIState *s) sdhci_update_irq(s); - if (s->blksize && (s->cmdreg & SDHC_CMD_DATA_PRESENT)) { + if (!timeout && s->blksize && (s->cmdreg & SDHC_CMD_DATA_PRESENT)) { s->data_count = 0; sdhci_data_transfer(s); } -- 2.7.4