From: Bin Meng <bin.m...@windriver.com> Per the "Physical Layer Specification Version 8.00", table 4-26 (SD mode) and table 7-3 (SPI mode) command descriptions, the following commands:
- CMD28 (SET_WRITE_PROT) - CMD29 (CLR_WRITE_PROT) - CMD30 (SEND_WRITE_PROT) are only supported by SDSC cards. Signed-off-by: Bin Meng <bin.m...@windriver.com> --- Changes in v2: - new patch: sd: Only SDSC cards support CMD28/29/30 hw/sd/sd.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/hw/sd/sd.c b/hw/sd/sd.c index a6a0b3dcc6..273bae0a9a 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -1284,6 +1284,10 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req) /* Write protection (Class 6) */ case 28: /* CMD28: SET_WRITE_PROT */ + if (sd->size > SDSC_MAX_CAPACITY) { + return sd_illegal; + } + switch (sd->state) { case sd_transfer_state: if (addr >= sd->size) { @@ -1303,6 +1307,10 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req) break; case 29: /* CMD29: CLR_WRITE_PROT */ + if (sd->size > SDSC_MAX_CAPACITY) { + return sd_illegal; + } + switch (sd->state) { case sd_transfer_state: if (addr >= sd->size) { @@ -1322,6 +1330,10 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req) break; case 30: /* CMD30: SEND_WRITE_PROT */ + if (sd->size > SDSC_MAX_CAPACITY) { + return sd_illegal; + } + switch (sd->state) { case sd_transfer_state: sd->state = sd_sendingdata_state; -- 2.25.1