This patch set contains a few bug fixes and I2C devices for some NPCM7XX boards.
Patch 1~2 fix a problem that causes the SMBus module to behave incorrectly when it's in FIFO mode and trying to receive more than 16 bytes at a time. Patch 3 fixes a error in a register for ADC module. Patch 4 makes the ADC input to be R/W instead of write only. It allows a test system to read these via QMP and has no negative effect. Patch 5 adds a new blockdev IF type IF_OTHER. Patch 6 modifies at24c_eeprom_init in NPCM7xx boards so that it can fit more use cases. Patch 7 uses the function defined in patch 5 to add the EEPROM and other I2C devices for Quanta GBS board. -- Changes since v3: 1. Add a new blockdev IF type IF_OTHER. 2. Use IF_OTHER instead of IF_NONE. -- Changes since v2: 1. Dropped patch 7. 2. Drop an extra variable in patch 5. -- Changes since v1: 1. Rewrote patch 5 to implement the function in NPCM7xx board file instead of the EEPROM device file. 2. Slightly modify patch 6 to adapt to the changes and QEMU comment style. 3. Squash patch 7 into patch 5 to make it compile. 4. Add a new patch 7. Hao Wu (6): hw/i2c: Clear ACK bit in NPCM7xx SMBus module hw/i2c: Read FIFO during RXF_CTL change in NPCM7XX SMBus hw/adc: Fix CONV bit in NPCM7XX ADC CON register hw/adc: Make adci[*] R/W in NPCM7XX ADC blockdev: Add a new IF type IF_OTHER hw/nvram: Update at24c EEPROM init function in NPCM7xx boards Patrick Venture (1): hw/arm: quanta-gbs-bmc add i2c devices blockdev.c | 3 +- hw/adc/npcm7xx_adc.c | 4 +- hw/arm/npcm7xx_boards.c | 96 ++++++++++++++++++++-------------- hw/i2c/npcm7xx_smbus.c | 8 +-- include/sysemu/blockdev.h | 1 + meson | 2 +- tests/qtest/npcm7xx_adc-test.c | 2 +- 7 files changed, 69 insertions(+), 47 deletions(-) -- 2.33.1.1089.g2158813163f-goog