Cover letter:
~~~~~~~~~~~~~
This series adds support for -pflash and direct SD card access to the
PPC e500 boards. The idea is to increase compatibility with "real" firmware
images where only the bare minimum of drivers is compiled in.
The series is structured as follows:
Patches 1-6 perform some general cleanup which paves the way for the rest of
the series.
Patch 7 adds -pflash handling where memory-mapped flash can be added on
user's behalf. That is, the flash memory region in the eLBC is only added if
the -pflash argument is supplied. Note that the cfi01 device model becomes
stricter in checking the size of the emulated flash space.
Patches 8 and 9 add a new device model - the Freescale eSDHC - to the e500
boards which was missing so far.
User documentation is also added as the new features become available.
Tesing done:
* `qemu-system-ppc -M ppce500 -cpu e500mc -m 256 -kernel uImage -append
"console=ttyS0 rootwait root=/dev/mtdblock0 nokaslr" -drive
if=pflash,file=rootfs.ext2,format=raw`
* `qemu-system-ppc -M ppce500 -cpu e500mc -m 256 -kernel uImage -append
"console=ttyS0 rootwait root=/dev/mmcblk0" -device sd-card,drive=mydrive -drive
id=mydrive,if=none,file=rootfs.ext2,format=raw`
The load was created using latest Buildroot with `make
qemu_ppc_e500mc_defconfig` where the rootfs was configured to be of ext2 type.
In both cases it was possible to log in and explore the root file system.
v3:
~~~
Phil:
- Also add power-of-2 fix to pflash_cfi02
- Resolve cfi01-specific assertion in e500 code
- Resolve unused define in eSDHC device model
- Resolve redundant alignment checks in eSDHC device model
Bin:
- Add dedicated flash chapter to documentation
Bernhard:
- Use is_power_of_2() instead of ctpop64() for better readability
- Only instantiate eSDHC device model in ppce500 (not used in MPC8544DS)
- Rebase onto gitlab.com/danielhb/qemu/tree/ppc-next
v2:
~~~
Bin:
- Add source for MPC8544DS platform bus' memory map in commit message.
- Keep "ESDHC" in comment referring to Linux driver.
- Use "qemu-system-ppc{64|32} in documentation.
- Use g_autofree in device tree code.
- Remove unneeded device tree properties.
- Error out if pflash size doesn't fit into eLBC memory window.
- Remove unused ESDHC defines.
- Define macro ESDHC_WML for register offset with magic constant.
- Fix some whitespace issues when adding eSDHC device to e500.
Phil:
- Fix tense in commit message.
Bernhard Beschow (9):
hw/block/pflash_cfi0{1,2}: Error out if device length isn't a power of
two
hw/{arm,ppc}: Resolve unreachable code
hw/block/pflash_cfi01: Attach memory region in boards
hw/block/pflash_cfi02: Attach memory region in boards
hw/sd/sdhci-internal: Unexport ESDHC defines
hw/sd/sdhci: Rename ESDHC_* defines to USDHC_*
hw/ppc/e500: Implement pflash handling
hw/sd/sdhci: Implement Freescale eSDHC device model
hw/ppc/e500: Add Freescale eSDHC to e500plat
docs/system/ppc/ppce500.rst | 28 ++++
hw/arm/collie.c | 20 ++-
hw/arm/digic_boards.c | 16 +-
hw/arm/gumstix.c | 24 +--
hw/arm/mainstone.c | 15 +-
hw/arm/musicpal.c | 15 +-
hw/arm/omap_sx1.c | 25 ++--
hw/arm/versatilepb.c | 14 +-
hw/arm/xilinx_zynq.c | 12 +-
hw/arm/z2.c | 12 +-
hw/block/pflash_cfi01.c | 12 +-
hw/block/pflash_cfi02.c | 14 +-
hw/microblaze/petalogix_ml605_mmu.c | 16 +-
hw/microblaze/petalogix_s3adsp1800_mmu.c | 10 +-
hw/mips/malta.c | 4 +-
hw/ppc/Kconfig | 2 +
hw/ppc/e500.c | 97 +++++++++++-
hw/ppc/e500.h | 1 +
hw/ppc/e500plat.c | 1 +
hw/ppc/sam460ex.c | 19 ++-
hw/ppc/virtex_ml507.c | 5 +-
hw/sd/sdhci-internal.h | 20 ---
hw/sd/sdhci.c | 183 ++++++++++++++++++++---
hw/sh4/r2d.c | 11 +-
include/hw/block/flash.h | 7 +-
include/hw/sd/sdhci.h | 3 +
26 files changed, 433 insertions(+), 153 deletions(-)
--
2.38.0
