I noticed while testing the uhci emulation on debian it fails to load on the Linux 2.6.12 kernel:
(from qemu terminal) uhci writew port=0x0004 val=0x0000 uhci writew port=0x0000 val=0x0004 uhci writew port=0x0000 val=0x0000 uhci readw port=0x0010 val=0x0083 uhci readw port=0x0012 val=0x0080 uhci readw port=0x0014 val=0xff7f uhci writew port=0x0000 val=0x0002 uhci readw port=0x0000 val=0x0002 uhci readw port=0x0000 val=0x0002 uhci readw port=0x0000 val=0x0002 uhci readw port=0x0000 val=0x0002 uhci readw port=0x0000 val=0x0002 uhci readw port=0x0000 val=0x0002 uhci readw port=0x0000 val=0x0002 uhci readw port=0x0000 val=0x0002 uhci readw port=0x0000 val=0x0002 uhci readw port=0x0000 val=0x0002 uhci readw port=0x0000 val=0x0002 (from kernel boot sequence) uhci_hcd 0000:00:01.2: Intel Corporation 82371SB PIIX3 USB [Natoma/Triton II] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c020 uhci_hcd 0000:00:01.2: USBCMD_HCRESET timed out! uhci_hcd 0000:00:01.2: startup error -110 uhci_hcd 0000:00:01.2: USB bus 1 deregistered uhci_hcd 0000:00:01.2: init 0000:00:01.2 fail, -110 uhci_hcd: probe of 0000:00:01.2 failed with error -110 From this, the uhci driver is looking for the cmd register to be reset on HCRESET, but it never happens. Looking at the kernel source, it fails in the code starting on line 377: http://kernel.org/git/?p=linux/kernel/git/gregkh/linux-2.6.12.y.git;a=blob;h=49bd83ee0c75bd77eded16e1fa3d02484f2d784a;hb=ab1e03b731781609a550360f295061ff57ca3dbb;f=drivers/usb/host/uhci-hcd.c A quick glance at hw/usb-uhci.c in function uhci_ioport_writew shows two checks for UHCI_CMD_GRESET; both call uhci_reset(). Shouldn't the second selection logic structure look like: if (val & UHCI_CMD_HCRESET) { uhci_reset(s); return; } This solves the problem with 2.6.12 and the bus is registered successfuly. On another note, when you perform 'info usb' from qemu monitor with a Full Speed device attached it reports 480Mb/s as the device speed. _______________________________________________ Qemu-devel mailing list Qemu-devel@nongnu.org http://lists.nongnu.org/mailman/listinfo/qemu-devel
