On 1/11/24 00:15, Ninad Palsule wrote:
This is a part of patchset where IBM's Flexible Service Interface is
introduced.
The LBUS is modelled to maintain mapped memory for the devices. The
memory is mapped after CFAM config, peek table and FSI slave registers.
The scratchpad provides a set of non-functional registers. The firmware
is free to use them, hardware does not support any special management
support. The scratchpad registers can be read or written from LBUS
slave. The scratch pad is managed under FSI CFAM state.
This scratchpad mode should be in its own patch and thanks for the
extending the number of registers
[ clg: - removed lbus_add_device() bc unused
- removed lbus_create_device() bc used only once
- removed "address" property
- updated meson.build to build fsi dir
- included an empty hw/fsi/trace-events ]
this list of modifications should be before my S-o-b.
Signed-off-by: Andrew Jeffery <and...@aj.id.au>
Signed-off-by: Cédric Le Goater <c...@kaod.org>
Signed-off-by: Ninad Palsule <ni...@linux.ibm.com>
---
v9:
- Changed LBUS memory region to 1MB.
---
meson.build | 1 +
hw/fsi/trace.h | 1 +
include/hw/fsi/lbus.h | 52 ++++++++++++++++++
hw/fsi/lbus.c | 121 ++++++++++++++++++++++++++++++++++++++++++
hw/Kconfig | 1 +
hw/fsi/Kconfig | 2 +
hw/fsi/meson.build | 1 +
hw/fsi/trace-events | 2 +
hw/meson.build | 1 +
9 files changed, 182 insertions(+)
create mode 100644 hw/fsi/trace.h
create mode 100644 include/hw/fsi/lbus.h
create mode 100644 hw/fsi/lbus.c
create mode 100644 hw/fsi/Kconfig
create mode 100644 hw/fsi/meson.build
create mode 100644 hw/fsi/trace-events
diff --git a/meson.build b/meson.build
index 371edafae6..498d08b866 100644
--- a/meson.build
+++ b/meson.build
@@ -3273,6 +3273,7 @@ if have_system
'hw/char',
'hw/display',
'hw/dma',
+ 'hw/fsi',
'hw/hyperv',
'hw/i2c',
'hw/i386',
diff --git a/hw/fsi/trace.h b/hw/fsi/trace.h
new file mode 100644
index 0000000000..ee67c7fb04
--- /dev/null
+++ b/hw/fsi/trace.h
@@ -0,0 +1 @@
+#include "trace/trace-hw_fsi.h"
diff --git a/include/hw/fsi/lbus.h b/include/hw/fsi/lbus.h
new file mode 100644
index 0000000000..8bacdded7f
--- /dev/null
+++ b/include/hw/fsi/lbus.h
@@ -0,0 +1,52 @@
+/*
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ * Copyright (C) 2024 IBM Corp.
+ *
+ * IBM Local bus and connected device structures.
+ */
+#ifndef FSI_LBUS_H
+#define FSI_LBUS_H
+
+#include "hw/qdev-core.h"
+#include "qemu/units.h"
+#include "exec/memory.h"
+
+#define TYPE_FSI_LBUS_DEVICE "fsi.lbus.device"
+OBJECT_DECLARE_TYPE(FSILBusDevice, FSILBusDeviceClass, FSI_LBUS_DEVICE)
+
+#define FSI_LBUS_MEM_REGION_SIZE (1 * MiB)
+#define FSI_LBUSDEV_IOMEM_START 0xc00 /* 3K used by CFAM config etc */
These define are not very useful. Please remove (see comments in
lbus.c)
+
+typedef struct FSILBusDevice {
+ DeviceState parent;
+
+ MemoryRegion iomem;
+} FSILBusDevice;
+
+typedef struct FSILBusDeviceClass {
+ DeviceClass parent;
+
+ uint32_t config;
+} FSILBusDeviceClass;
This class is unused now.
+
+#define TYPE_FSI_LBUS "fsi.lbus"
+OBJECT_DECLARE_SIMPLE_TYPE(FSILBus, FSI_LBUS)
+
+typedef struct FSILBus {
+ BusState bus;
+
+ MemoryRegion mr;
+} FSILBus;
+
+#define TYPE_FSI_SCRATCHPAD "fsi.scratchpad"
+#define SCRATCHPAD(obj) OBJECT_CHECK(FSIScratchPad, (obj), TYPE_FSI_SCRATCHPAD)
+
+#define FSI_SCRATCHPAD_NR_REGS 4
+
+typedef struct FSIScratchPad {
+ FSILBusDevice parent;
+
+ uint32_t reg[FSI_SCRATCHPAD_NR_REGS];
+} FSIScratchPad;
+
+#endif /* FSI_LBUS_H */
diff --git a/hw/fsi/lbus.c b/hw/fsi/lbus.c
new file mode 100644
index 0000000000..34c450cc68
--- /dev/null
+++ b/hw/fsi/lbus.c
@@ -0,0 +1,121 @@
+/*
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ * Copyright (C) 2024 IBM Corp.
+ *
+ * IBM Local bus where FSI slaves are connected
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "hw/fsi/lbus.h"
+
+#include "hw/qdev-properties.h"
+
+#include "trace.h"
+
+static void lbus_init(Object *o)
I would prefix the lbus routine and struct with fsi_lbus to be
consistent with the types and macro.
+{
+ FSILBus *lbus = FSI_LBUS(o);
+
+ memory_region_init(&lbus->mr, OBJECT(lbus), TYPE_FSI_LBUS,
+ FSI_LBUS_MEM_REGION_SIZE - FSI_LBUSDEV_IOMEM_START);
This is enough :
memory_region_init(&lbus->mr, OBJECT(lbus), TYPE_FSI_LBUS, 1 * MiB);
+}
+
+static const TypeInfo lbus_info = {
+ .name = TYPE_FSI_LBUS,
+ .parent = TYPE_BUS,
+ .instance_init = lbus_init,
+ .instance_size = sizeof(FSILBus),
+};
+
+static void lbus_device_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->bus_type = TYPE_FSI_LBUS;
+}
+
+static const TypeInfo lbus_device_type_info = {
+ .name = TYPE_FSI_LBUS_DEVICE,
+ .parent = TYPE_DEVICE,
+ .instance_size = sizeof(FSILBusDevice),
+ .abstract = true,
+ .class_init = lbus_device_class_init,
+ .class_size = sizeof(FSILBusDeviceClass),
+};
+
+static uint64_t fsi_scratchpad_read(void *opaque, hwaddr addr, unsigned size)
+{
+ FSIScratchPad *s = SCRATCHPAD(opaque);
+
+ trace_fsi_scratchpad_read(addr, size);
+
+ if (addr & ~(FSI_SCRATCHPAD_NR_REGS - 1)) {
+ return 0;
+ }
+
+ return s->reg[addr];
+}
+
+static void fsi_scratchpad_write(void *opaque, hwaddr addr, uint64_t data,
+ unsigned size)
+{
+ FSIScratchPad *s = SCRATCHPAD(opaque);
+
+ trace_fsi_scratchpad_write(addr, size, data);
+
+ if (addr & ~(FSI_SCRATCHPAD_NR_REGS - 1)) {
There is a type confusion. addr is an offset in a memory region and
FSI_SCRATCHPAD_NR_REGS is an index an array.
+ return;
+ }
+
+ s->reg[addr] = data;
same here.
+}
+
+static const struct MemoryRegionOps scratchpad_ops = {
+ .read = fsi_scratchpad_read,
+ .write = fsi_scratchpad_write,
+ .endianness = DEVICE_BIG_ENDIAN,
+};
+
+static void fsi_scratchpad_realize(DeviceState *dev, Error **errp)
+{
+ FSILBusDevice *ldev = FSI_LBUS_DEVICE(dev);
+
+ memory_region_init_io(&ldev->iomem, OBJECT(ldev), &scratchpad_ops,
+ ldev, TYPE_FSI_SCRATCHPAD, 0x400);
+}
+
+static void fsi_scratchpad_reset(DeviceState *dev)
+{
+ FSIScratchPad *s = SCRATCHPAD(dev);
+ int i;
+
+ for (i = 0; i < FSI_SCRATCHPAD_NR_REGS; i++) {
+ s->reg[i] = 0;
memset(s->regs, 0, sizeof(s->regs));
Thanks,
C.
+ }
+}
+
+static void fsi_scratchpad_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->realize = fsi_scratchpad_realize;
+ dc->reset = fsi_scratchpad_reset;
+}
+
+static const TypeInfo fsi_scratchpad_info = {
+ .name = TYPE_FSI_SCRATCHPAD,
+ .parent = TYPE_FSI_LBUS_DEVICE,
+ .instance_size = sizeof(FSIScratchPad),
+ .class_init = fsi_scratchpad_class_init,
+ .class_size = sizeof(FSILBusDeviceClass),
+};
+
+static void lbus_register_types(void)
+{
+ type_register_static(&lbus_info);
+ type_register_static(&lbus_device_type_info);
+ type_register_static(&fsi_scratchpad_info);
+}
+
+type_init(lbus_register_types);
diff --git a/hw/Kconfig b/hw/Kconfig
index 9ca7b38c31..2c00936c28 100644
--- a/hw/Kconfig
+++ b/hw/Kconfig
@@ -9,6 +9,7 @@ source core/Kconfig
source cxl/Kconfig
source display/Kconfig
source dma/Kconfig
+source fsi/Kconfig
source gpio/Kconfig
source hyperv/Kconfig
source i2c/Kconfig
diff --git a/hw/fsi/Kconfig b/hw/fsi/Kconfig
new file mode 100644
index 0000000000..9c34a418d7
--- /dev/null
+++ b/hw/fsi/Kconfig
@@ -0,0 +1,2 @@
+config FSI
+ bool
diff --git a/hw/fsi/meson.build b/hw/fsi/meson.build
new file mode 100644
index 0000000000..93ba19dd04
--- /dev/null
+++ b/hw/fsi/meson.build
@@ -0,0 +1 @@
+system_ss.add(when: 'CONFIG_FSI', if_true: files('lbus.c'))
diff --git a/hw/fsi/trace-events b/hw/fsi/trace-events
new file mode 100644
index 0000000000..c5753e2791
--- /dev/null
+++ b/hw/fsi/trace-events
@@ -0,0 +1,2 @@
+fsi_scratchpad_read(uint64_t addr, uint32_t size) "@0x%" PRIx64 " size=%d"
+fsi_scratchpad_write(uint64_t addr, uint32_t size, uint64_t data) "@0x%" PRIx64 "
size=%d value=0x%"PRIx64
diff --git a/hw/meson.build b/hw/meson.build
index f01fac4617..463d702683 100644
--- a/hw/meson.build
+++ b/hw/meson.build
@@ -44,6 +44,7 @@ subdir('virtio')
subdir('watchdog')
subdir('xen')
subdir('xenpv')
+subdir('fsi')
subdir('alpha')
subdir('arm')
