From: Helge Deller <del...@gmx.de>
Recognize the qemu --nodefaults option, which will disable the
following default devices on hppa:
- lsi53c895a SCSI controller,
- artist graphics card,
- LASI 82596 NIC,
- tulip PCI NIC,
- second serial PCI card,
- USB OHCI controller.
Adding this option is very useful to allow manual testing and
debugging of the other possible devices on the command line.
Signed-off-by: Helge Deller <del...@gmx.de>
Reviewed-by: Richard Henderson <richard.hender...@linaro.org>
(cherry picked from commit d8a3220005d74512677b181e3a32cd94b13ddf49)
Signed-off-by: Michael Tokarev <m...@tls.msk.ru>
diff --git a/hw/hppa/machine.c b/hw/hppa/machine.c
index b11907617e..54ca2fd91a 100644
--- a/hw/hppa/machine.c
+++ b/hw/hppa/machine.c
@@ -346,8 +346,10 @@ static void machine_HP_common_init_tail(MachineState
*machine, PCIBus *pci_bus,
SysBusDevice *s;
/* SCSI disk setup. */
- dev = DEVICE(pci_create_simple(pci_bus, -1, "lsi53c895a"));
- lsi53c8xx_handle_legacy_cmdline(dev);
+ if (drive_get_max_bus(IF_SCSI) >= 0) {
+ dev = DEVICE(pci_create_simple(pci_bus, -1, "lsi53c895a"));
+ lsi53c8xx_handle_legacy_cmdline(dev);
+ }
/* Graphics setup. */
if (machine->enable_graphics && vga_interface_type != VGA_NONE) {
@@ -360,7 +362,7 @@ static void machine_HP_common_init_tail(MachineState
*machine, PCIBus *pci_bus,
}
/* Network setup. */
- if (enable_lasi_lan()) {
+ if (nd_table[0].used && enable_lasi_lan()) {
lasi_82596_init(addr_space, translate(NULL, LASI_LAN_HPA),
qdev_get_gpio_in(lasi_dev, LASI_IRQ_LAN_HPA));
}
@@ -385,7 +387,7 @@ static void machine_HP_common_init_tail(MachineState
*machine, PCIBus *pci_bus,
pci_set_word(&pci_dev->config[PCI_SUBSYSTEM_ID], 0x1227); /* Powerbar */
/* create a second serial PCI card when running Astro */
- if (!lasi_dev) {
+ if (serial_hd(1) && !lasi_dev) {
pci_dev = pci_new(-1, "pci-serial-4x");
qdev_prop_set_chr(DEVICE(pci_dev), "chardev1", serial_hd(1));
qdev_prop_set_chr(DEVICE(pci_dev), "chardev2", serial_hd(2));
--
2.39.2
