This commit adds a QTest that verifies each input line of a specific
EXTI OR gate can influence the output line.
Signed-off-by: Inès Varhol <ines.var...@telecom-paris.fr>
---
tests/qtest/stm32l4x5_exti-test.c | 97 +++++++++++++++++++++++++++++++
1 file changed, 97 insertions(+)
diff --git a/tests/qtest/stm32l4x5_exti-test.c
b/tests/qtest/stm32l4x5_exti-test.c
index c390077713..276b7adc7a 100644
--- a/tests/qtest/stm32l4x5_exti-test.c
+++ b/tests/qtest/stm32l4x5_exti-test.c
@@ -31,6 +31,11 @@
#define EXTI0_IRQ 6
#define EXTI1_IRQ 7
+#define EXTI5_IRQ 23
+#define EXTI6_IRQ 23
+#define EXTI7_IRQ 23
+#define EXTI8_IRQ 23
+#define EXTI9_IRQ 23
#define EXTI35_IRQ 1
static void enable_nvic_irq(unsigned int n)
@@ -499,6 +504,96 @@ static void test_interrupt(void)
g_assert_false(check_nvic_pending(EXTI1_IRQ));
}
+static void test_orred_interrupts(void)
+{
+ /*
+ * For lines EXTI5..9 (fanned-in to NVIC irq 23),
+ * test that rising the line pends interrupt
+ * 23 in NVIC.
+ */
+ enable_nvic_irq(EXTI5_IRQ);
+ /* Check that there are no interrupts already pending in PR */
+ g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+ /* Check that this specific interrupt isn't pending in NVIC */
+ g_assert_false(check_nvic_pending(EXTI5_IRQ));
+
+ /* Enable interrupt lines EXTI[5..9] */
+ exti_writel(EXTI_IMR1, (0x1F << 5));
+
+ /* Configure interrupt on rising edge */
+ exti_writel(EXTI_RTSR1, (0x1F << 5));
+
+ /* Simulate rising edge from GPIO line 7 */
+ exti_set_irq(7, 1);
+ g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 1 << 7);
+ g_assert_true(check_nvic_pending(EXTI7_IRQ));
+
+ /* Clear the pending bit in PR */
+ exti_writel(EXTI_PR1, 1 << 7);
+ g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+ g_assert_true(check_nvic_pending(EXTI7_IRQ));
+
+ /* Clean NVIC */
+ unpend_nvic_irq(EXTI7_IRQ);
+ g_assert_false(check_nvic_pending(EXTI7_IRQ));
+
+ /* Simulate rising edge from GPIO line 6 */
+ exti_set_irq(6, 1);
+ g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 1 << 6);
+ g_assert_true(check_nvic_pending(EXTI6_IRQ));
+
+ /* Clear the pending bit in PR */
+ exti_writel(EXTI_PR1, 1 << 6);
+ g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+ g_assert_true(check_nvic_pending(EXTI6_IRQ));
+
+ /* Clean NVIC */
+ unpend_nvic_irq(EXTI6_IRQ);
+ g_assert_false(check_nvic_pending(EXTI6_IRQ));
+
+ /* Simulate rising edge from GPIO line 5 */
+ exti_set_irq(5, 1);
+ g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 1 << 5);
+ g_assert_true(check_nvic_pending(EXTI5_IRQ));
+
+ /* Clear the pending bit in PR */
+ exti_writel(EXTI_PR1, 1 << 5);
+ g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+ g_assert_true(check_nvic_pending(EXTI5_IRQ));
+
+ /* Clean NVIC */
+ unpend_nvic_irq(EXTI5_IRQ);
+ g_assert_false(check_nvic_pending(EXTI5_IRQ));
+
+ /* Simulate rising edge from GPIO line 8 */
+ exti_set_irq(8, 1);
+ g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 1 << 8);
+ g_assert_true(check_nvic_pending(EXTI8_IRQ));
+
+ /* Clear the pending bit in PR */
+ exti_writel(EXTI_PR1, 1 << 8);
+ g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+ g_assert_true(check_nvic_pending(EXTI8_IRQ));
+
+ /* Clean NVIC */
+ unpend_nvic_irq(EXTI8_IRQ);
+ g_assert_false(check_nvic_pending(EXTI8_IRQ));
+
+ /* Simulate rising edge from GPIO line 9 */
+ exti_set_irq(9, 1);
+ g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 1 << 9);
+ g_assert_true(check_nvic_pending(EXTI9_IRQ));
+
+ /* Clear the pending bit in PR */
+ exti_writel(EXTI_PR1, 1 << 9);
+ g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+ g_assert_true(check_nvic_pending(EXTI9_IRQ));
+
+ /* Clean NVIC */
+ unpend_nvic_irq(EXTI9_IRQ);
+ g_assert_false(check_nvic_pending(EXTI9_IRQ));
+}
+
int main(int argc, char **argv)
{
int ret;
@@ -515,6 +610,8 @@ int main(int argc, char **argv)
qtest_add_func("stm32l4x5/exti/masked_interrupt", test_masked_interrupt);
qtest_add_func("stm32l4x5/exti/interrupt", test_interrupt);
qtest_add_func("stm32l4x5/exti/test_edge_selector", test_edge_selector);
+ qtest_add_func("stm32l4x5/exti/test_orred_interrupts",
+ test_orred_interrupts);
qtest_start("-machine b-l475e-iot01a");
ret = g_test_run();
--
2.43.0
