On Fri Mar 8, 2024 at 9:19 PM AEST, Harsh Prateek Bora wrote:
> Adding initial documentation about Nested PAPR API to describe the set
> of APIs and its usage. Also talks about the Guest State Buffer elements
> and it's format which is used between L0/L1 to communicate L2 state.
>
> Signed-off-by: Michael Neuling <mi...@neuling.org>
> Signed-off-by: Harsh Prateek Bora <hars...@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npig...@gmail.com>
> ---
> docs/devel/nested-papr.txt | 119 +++++++++++++++++++++++++++++++++++++
> 1 file changed, 119 insertions(+)
> create mode 100644 docs/devel/nested-papr.txt
>
> diff --git a/docs/devel/nested-papr.txt b/docs/devel/nested-papr.txt
> new file mode 100644
> index 0000000000..90943650db
> --- /dev/null
> +++ b/docs/devel/nested-papr.txt
> @@ -0,0 +1,119 @@
> +Nested PAPR API (aka KVM on PowerVM)
> +====================================
> +
> +This API aims at providing support to enable nested virtualization with
> +KVM on PowerVM. While the existing support for nested KVM on PowerNV was
> +introduced with cap-nested-hv option, however, with a slight design change,
> +to enable this on papr/pseries, a new cap-nested-papr option is added. eg:
> +
> + qemu-system-ppc64 -cpu POWER10 -machine pseries,cap-nested-papr=true ...
> +
> +Work by:
> + Michael Neuling <mi...@neuling.org>
> + Vaibhav Jain <vaib...@linux.ibm.com>
> + Jordan Niethe <jniet...@gmail.com>
> + Harsh Prateek Bora <hars...@linux.ibm.com>
> + Shivaprasad G Bhat <sb...@linux.ibm.com>
> + Kautuk Consul <kcon...@linux.vnet.ibm.com>
> +
> +Below taken from the kernel documentation:
> +
> +Introduction
> +============
> +
> +This document explains how a guest operating system can act as a
> +hypervisor and run nested guests through the use of hypercalls, if the
> +hypervisor has implemented them. The terms L0, L1, and L2 are used to
> +refer to different software entities. L0 is the hypervisor mode entity
> +that would normally be called the "host" or "hypervisor". L1 is a
> +guest virtual machine that is directly run under L0 and is initiated
> +and controlled by L0. L2 is a guest virtual machine that is initiated
> +and controlled by L1 acting as a hypervisor. A significant design change
> +wrt existing API is that now the entire L2 state is maintained within L0.
> +
> +Existing Nested-HV API
> +======================
> +
> +Linux/KVM has had support for Nesting as an L0 or L1 since 2018
> +
> +The L0 code was added::
> +
> + commit 8e3f5fc1045dc49fd175b978c5457f5f51e7a2ce
> + Author: Paul Mackerras <pau...@ozlabs.org>
> + Date: Mon Oct 8 16:31:03 2018 +1100
> + KVM: PPC: Book3S HV: Framework and hcall stubs for nested virtualization
> +
> +The L1 code was added::
> +
> + commit 360cae313702cdd0b90f82c261a8302fecef030a
> + Author: Paul Mackerras <pau...@ozlabs.org>
> + Date: Mon Oct 8 16:31:04 2018 +1100
> + KVM: PPC: Book3S HV: Nested guest entry via hypercall
> +
> +This API works primarily using a signal hcall h_enter_nested(). This
> +call made by the L1 to tell the L0 to start an L2 vCPU with the given
> +state. The L0 then starts this L2 and runs until an L2 exit condition
> +is reached. Once the L2 exits, the state of the L2 is given back to
> +the L1 by the L0. The full L2 vCPU state is always transferred from
> +and to L1 when the L2 is run. The L0 doesn't keep any state on the L2
> +vCPU (except in the short sequence in the L0 on L1 -> L2 entry and L2
> +-> L1 exit).
> +
> +The only state kept by the L0 is the partition table. The L1 registers
> +it's partition table using the h_set_partition_table() hcall. All
> +other state held by the L0 about the L2s is cached state (such as
> +shadow page tables).
> +
> +The L1 may run any L2 or vCPU without first informing the L0. It
> +simply starts the vCPU using h_enter_nested(). The creation of L2s and
> +vCPUs is done implicitly whenever h_enter_nested() is called.
> +
> +In this document, we call this existing API the v1 API.
> +
> +New PAPR API
> +===============
> +
> +The new PAPR API changes from the v1 API such that the creating L2 and
> +associated vCPUs is explicit. In this document, we call this the v2
> +API.
> +
> +h_enter_nested() is replaced with H_GUEST_VCPU_RUN(). Before this can
> +be called the L1 must explicitly create the L2 using h_guest_create()
> +and any associated vCPUs() created with h_guest_create_vCPU(). Getting
> +and setting vCPU state can also be performed using h_guest_{g|s}et
> +hcall.
> +
> +The basic execution flow is for an L1 to create an L2, run it, and
> +delete it is:
> +
> +- L1 and L0 negotiate capabilities with H_GUEST_{G,S}ET_CAPABILITIES()
> + (normally at L1 boot time).
> +
> +- L1 requests the L0 to create an L2 with H_GUEST_CREATE() and receives a
> token
> +
> +- L1 requests the L0 to create an L2 vCPU with H_GUEST_CREATE_VCPU()
> +
> +- L1 and L0 communicate the vCPU state using the H_GUEST_{G,S}ET() hcall
> +
> +- L1 requests the L0 to run the vCPU using H_GUEST_RUN_VCPU() hcall
> +
> +- L1 deletes L2 with H_GUEST_DELETE()
> +
> +For more details, please refer:
> +
> +[1] Linux Kernel documentation (upstream documentation commit):
> +
> +commit 476652297f94a2e5e5ef29e734b0da37ade94110
> +Author: Michael Neuling <mi...@neuling.org>
> +Date: Thu Sep 14 13:06:00 2023 +1000
> +
> + docs: powerpc: Document nested KVM on POWER
> +
> + Document support for nested KVM on POWER using the existing API as well
> + as the new PAPR API. This includes the new HCALL interface and how it
> + used by KVM.
> +
> + Signed-off-by: Michael Neuling <mi...@neuling.org>
> + Signed-off-by: Jordan Niethe <jniet...@gmail.com>
> + Signed-off-by: Michael Ellerman <m...@ellerman.id.au>
> + Link: https://msgid.link/20230914030600.16993-12-jniet...@gmail.com
