Add a property has-nmi to the GICv3 device, and use this to set
the NMI bit in the GICD_TYPER register. This isn't visible to
guests yet because the property defaults to false and we won't
set it in the board code until we've landed all of the changes
needed to implement FEAT_GICV3_NMI.
Signed-off-by: Jinjie Ruan <ruanjin...@huawei.com>
Reviewed-by: Richard Henderson <richard.hender...@linaro.org>
Reviewed-by: Peter Maydell <peter.mayd...@linaro.org>
---
v12:
- Update the subject and commit message.
- Add Reviewed-by.
v10:
- Adjust to before add irq non-maskable property.
v4:
- Add Reviewed-by.
---
hw/intc/arm_gicv3_common.c | 1 +
hw/intc/arm_gicv3_dist.c | 2 ++
hw/intc/gicv3_internal.h | 1 +
include/hw/intc/arm_gicv3_common.h | 1 +
4 files changed, 5 insertions(+)
diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c
index c52f060026..2d2cea6858 100644
--- a/hw/intc/arm_gicv3_common.c
+++ b/hw/intc/arm_gicv3_common.c
@@ -569,6 +569,7 @@ static Property arm_gicv3_common_properties[] = {
DEFINE_PROP_UINT32("num-irq", GICv3State, num_irq, 32),
DEFINE_PROP_UINT32("revision", GICv3State, revision, 3),
DEFINE_PROP_BOOL("has-lpi", GICv3State, lpi_enable, 0),
+ DEFINE_PROP_BOOL("has-nmi", GICv3State, nmi_support, 0),
DEFINE_PROP_BOOL("has-security-extensions", GICv3State, security_extn, 0),
/*
* Compatibility property: force 8 bits of physical priority, even
diff --git a/hw/intc/arm_gicv3_dist.c b/hw/intc/arm_gicv3_dist.c
index 35e850685c..22ddc0d666 100644
--- a/hw/intc/arm_gicv3_dist.c
+++ b/hw/intc/arm_gicv3_dist.c
@@ -389,6 +389,7 @@ static bool gicd_readl(GICv3State *s, hwaddr offset,
* by GICD_TYPER.IDbits)
* MBIS == 0 (message-based SPIs not supported)
* SecurityExtn == 1 if security extns supported
+ * NMI = 1 if Non-maskable interrupt property is supported
* CPUNumber == 0 since for us ARE is always 1
* ITLinesNumber == (((max SPI IntID + 1) / 32) - 1)
*/
@@ -402,6 +403,7 @@ static bool gicd_readl(GICv3State *s, hwaddr offset,
bool dvis = s->revision >= 4;
*data = (1 << 25) | (1 << 24) | (dvis << 18) | (sec_extn << 10) |
+ (s->nmi_support << GICD_TYPER_NMI_SHIFT) |
(s->lpi_enable << GICD_TYPER_LPIS_SHIFT) |
(0xf << 19) | itlinesnumber;
return true;
diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h
index 29d5cdc1b6..8f4ebed2f4 100644
--- a/hw/intc/gicv3_internal.h
+++ b/hw/intc/gicv3_internal.h
@@ -68,6 +68,7 @@
#define GICD_CTLR_E1NWF (1U << 7)
#define GICD_CTLR_RWP (1U << 31)
+#define GICD_TYPER_NMI_SHIFT 9
#define GICD_TYPER_LPIS_SHIFT 17
/* 16 bits EventId */
diff --git a/include/hw/intc/arm_gicv3_common.h
b/include/hw/intc/arm_gicv3_common.h
index 7324c7d983..4358c5319c 100644
--- a/include/hw/intc/arm_gicv3_common.h
+++ b/include/hw/intc/arm_gicv3_common.h
@@ -249,6 +249,7 @@ struct GICv3State {
uint32_t num_irq;
uint32_t revision;
bool lpi_enable;
+ bool nmi_support;
bool security_extn;
bool force_8bit_prio;
bool irq_reset_nonsecure;
--
2.34.1
