Weifeng Liu <weifeng.li...@gmail.com> writes: > Greetings, > > I'd like to introduce you my attempt to enable virglrenderer backend for > rutabaga empowered virtio-gpu device. I am aware that there have been > effort in supporting venus in virtio-gpu-virgl.c [1], but there is no > reason to prevent us from leveraging the virglrenderer component in > rutabaga_gfx, especially it being not very hard to add this > functionality. > > Generally, the gap is the polling capability, i.e., virglrenderer > requires the main thread (namely the GPU command handling thread) to > poll virglrenderer at proper moments, which is not yet supported in > virtio-gpu-rutabaga device. This patch set try to add this so that > virglrenderer backend (including virgl and venus) can work as expected. > > Slight change to rutabaga_gfx_ffi is also a requirement, which is > included in [2]. > > Further effort is required to tune the performance, since copying is > present before the rendered images get displayed. But I still think this > patch set could be a good starting point for the pending work. > > For those interested in setting up environment and playing around with > this patch set, here is guideline in brief: > > 1. Clone the master/main branch of virglrenderer, compile and install it. > > git clone https://gitlab.freedesktop.org/virgl/virglrenderer > cd virglrenderer > meson setup builddir \ > --prefix=$INSTALL_DIR/virglrenderer \ > -Dvenus=true > ninja -C builddir install > > 2. Clone the patched CrosVM, build and install rutabaga_gfx_ffi. > > git clone -b rutabaga_ffi_virgl https://github.com/phreer/crosvm.git > cd crosvm/rutabaga_gfx/ffi > export PKG_CONFIG_PATH=$INSTALL_DIR/virglrenderer/lib64/pkgconfig/ > meson setup builddir/ \ > --prefix $HOME/install/rutabaga_gfx/rutabaga_gfx_ffi/ \ > -Dvirglrenderer=true > ninja -C builddir install
Is there a PR going in for this? The moving parts for rutabaga are complex enough I think we need support upstream before merging this. Is this branch where I should be getting the poll helpers from? cc -m64 @qemu-system-arm.rsp /usr/bin/ld: libcommon.fa.p/hw_display_virtio-gpu-rutabaga.c.o: in function `virtio_gpu_fence_poll': /home/alex/lsrc/qemu.git/builds/vulkan/../../hw/display/virtio-gpu-rutabaga.c:909: undefined reference to `rutabaga_poll' /usr/bin/ld: libcommon.fa.p/hw_display_virtio-gpu-rutabaga.c.o: in function `virtio_gpu_rutabaga_init': /home/alex/lsrc/qemu.git/builds/vulkan/../../hw/display/virtio-gpu-rutabaga.c:1122: undefined reference to `rutabaga_poll_descriptor' collect2: error: ld returned 1 exit status ninja: build stopped: subcommand failed. > 3. Applied this patch set to QEMU, build and install it: > > cd qemu > # Apply this patch set atop main branch ... > mkdir builddir; cd builddir > ../configure --prefix=$INSTALL_DIR/qemu \ > --target-list=x86_64-softmmu \ > --disable-virglrenderer \ > --enable-rutabaga_gfx > ninja -C builddir install > > 4. If you are lucky and everything goes fine, you are prepared to launch > VM with virglrenderer backed virtio-gpu-rutabaga device: > > export > LD_LIBRARY_PATH=$INSTALL_DIR/virglrenderer/lib64/:$LD_LIBRARY_PATH > export > LD_LIBRARY_PATH=$INSTALL_DIR/rutabaga_gfx_ffi/lib64/:$LD_LIBRARY_PATH > $INSTALL_DIR/qemu/bin/qemu-system-x86_64 > $QEMU -d guest_errors -enable-kvm -M q35 -smp 4 -m $MEM \ > -object memory-backend-memfd,id=mem1,size=$MEM \ > -machine memory-backend=mem1 \ > -device > virtio-vga-rutabaga,venus=on,virgl2=on,wsi=surfaceless,hostmem=$MEM \ > This should go into docs/system/devices/virtio-gpu.rst with some explanation. Is there anything we need on the guest side or does this skip the encapsulating requirements of wayland? > Note: > > - You might need this patch set [3] to avoid KVM bad address error when > you are running on a GPU using TTM for memory management. > > [1] > https://lore.kernel.org/all/dba6eb97-e1d1-4694-bfb6-e72db9571...@daynix.com/T/ > [2] https://chromium-review.googlesource.com/c/crosvm/crosvm/+/5599645/1 > [3] https://lore.kernel.org/kvm/20240229025759.1187910-1-steve...@google.com/ > > Weifeng Liu (3): > virtio-gpu: rutabaga: Properly set stride when copying resources > virtio-gpu: rutabaga: Poll rutabaga upon events > virtio-gpu: rutabaga: Add options to enable virgl and venus contexts > > hw/display/virtio-gpu-rutabaga.c | 104 ++++++++++++++++++++++++++++++- > include/hw/virtio/virtio-gpu.h | 1 + > 2 files changed, 104 insertions(+), 1 deletion(-) -- Alex Bennée Virtualisation Tech Lead @ Linaro
