Hi, The patch series is still not merged.
On Thu, May 30, 2024 at 6:57 PM Peter Maydell <peter.mayd...@linaro.org> wrote: > > On Sun, 19 May 2024 at 10:42, Rayhan Faizel <rayhan.fai...@gmail.com> wrote: > > > > All BCM2835 boards have on-board OTP memory with 66 32-bit rows. Usually, > > its contents are accessible via mailbox commands. > > > > [Changes in v3] > > > > - Forgot to replace constant with macro in one particular spot. > > > > [Changes in v2] > > > > - Replace read/write with get/set in bcm2835_otp.c. > > - Use impl instead of valid in bcm2835_otp.c. > > - Replace all constant values with macros defined in bcm2835_otp.h. > > - Change memory region size of OTP device to 0x80. > > - After further testing on a real Raspberry Pi 3, I noticed a few things > > contrary to my initial assumptions: > > -- The customer OTP lock bit is bit 6 of row 32, NOT bit 30 of row 30. This > > is > > currently undocumented to my knowledge. > > -- The above lock indeed applies to the private key as well. > > > > Rayhan Faizel (3): > > hw/nvram: Add BCM2835 OTP device > > hw/arm: Connect OTP device to BCM2835 > > hw/misc: Implement mailbox properties for customer OTP and device > > specific private keys > > > > Applied to target-arm.next, thanks. > > -- PMM -- Rayhan Faizel
