From: Rayhan Faizel <rayhan.fai...@gmail.com>
Four mailbox properties are implemented as follows:
1. Customer OTP: GET_CUSTOMER_OTP and SET_CUSTOMER_OTP
2. Device-specific private key: GET_PRIVATE_KEY and
SET_PRIVATE_KEY.
The customer OTP is located in the rows 36-43. The device-specific private key
is located in the rows 56-63.
The customer OTP can be locked with the magic numbers 0xffffffff 0xaffe0000
when running the SET_CUSTOMER_OTP mailbox command. Bit 6 of row 32 indicates
this lock, which is undocumented. The lock also applies to the device-specific
private key.
Signed-off-by: Rayhan Faizel <rayhan.fai...@gmail.com>
Reviewed-by: Peter Maydell <peter.mayd...@linaro.org>
Signed-off-by: Peter Maydell <peter.mayd...@linaro.org>
---
include/hw/arm/raspberrypi-fw-defs.h | 2 +
include/hw/misc/bcm2835_property.h | 2 +
hw/arm/bcm2835_peripherals.c | 2 +
hw/misc/bcm2835_property.c | 87 ++++++++++++++++++++++++++++
4 files changed, 93 insertions(+)
diff --git a/include/hw/arm/raspberrypi-fw-defs.h
b/include/hw/arm/raspberrypi-fw-defs.h
index 8b404e05336..60b8e5b4513 100644
--- a/include/hw/arm/raspberrypi-fw-defs.h
+++ b/include/hw/arm/raspberrypi-fw-defs.h
@@ -56,6 +56,7 @@ enum rpi_firmware_property_tag {
RPI_FWREQ_GET_THROTTLED = 0x00030046,
RPI_FWREQ_GET_CLOCK_MEASURED = 0x00030047,
RPI_FWREQ_NOTIFY_REBOOT = 0x00030048,
+ RPI_FWREQ_GET_PRIVATE_KEY = 0x00030081,
RPI_FWREQ_SET_CLOCK_STATE = 0x00038001,
RPI_FWREQ_SET_CLOCK_RATE = 0x00038002,
RPI_FWREQ_SET_VOLTAGE = 0x00038003,
@@ -73,6 +74,7 @@ enum rpi_firmware_property_tag {
RPI_FWREQ_SET_PERIPH_REG = 0x00038045,
RPI_FWREQ_GET_POE_HAT_VAL = 0x00030049,
RPI_FWREQ_SET_POE_HAT_VAL = 0x00038049,
+ RPI_FWREQ_SET_PRIVATE_KEY = 0x00038081,
RPI_FWREQ_SET_POE_HAT_VAL_OLD = 0x00030050,
RPI_FWREQ_NOTIFY_XHCI_RESET = 0x00030058,
RPI_FWREQ_GET_REBOOT_FLAGS = 0x00030064,
diff --git a/include/hw/misc/bcm2835_property.h
b/include/hw/misc/bcm2835_property.h
index ba8896610cc..2f93fd0c757 100644
--- a/include/hw/misc/bcm2835_property.h
+++ b/include/hw/misc/bcm2835_property.h
@@ -11,6 +11,7 @@
#include "hw/sysbus.h"
#include "net/net.h"
#include "hw/display/bcm2835_fb.h"
+#include "hw/nvram/bcm2835_otp.h"
#include "qom/object.h"
#define TYPE_BCM2835_PROPERTY "bcm2835-property"
@@ -26,6 +27,7 @@ struct BCM2835PropertyState {
MemoryRegion iomem;
qemu_irq mbox_irq;
BCM2835FBState *fbdev;
+ BCM2835OTPState *otp;
MACAddr macaddr;
uint32_t board_rev;
diff --git a/hw/arm/bcm2835_peripherals.c b/hw/arm/bcm2835_peripherals.c
index 7d735bb56cf..ac153a96b9a 100644
--- a/hw/arm/bcm2835_peripherals.c
+++ b/hw/arm/bcm2835_peripherals.c
@@ -132,6 +132,8 @@ static void raspi_peripherals_base_init(Object *obj)
OBJECT(&s->fb));
object_property_add_const_link(OBJECT(&s->property), "dma-mr",
OBJECT(&s->gpu_bus_mr));
+ object_property_add_const_link(OBJECT(&s->property), "otp",
+ OBJECT(&s->otp));
/* Extended Mass Media Controller */
object_initialize_child(obj, "sdhci", &s->sdhci, TYPE_SYSBUS_SDHCI);
diff --git a/hw/misc/bcm2835_property.c b/hw/misc/bcm2835_property.c
index bdd9a6bbcec..63de3db6215 100644
--- a/hw/misc/bcm2835_property.c
+++ b/hw/misc/bcm2835_property.c
@@ -32,6 +32,7 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState
*s, uint32_t value)
uint32_t tmp;
int n;
uint32_t offset, length, color;
+ uint32_t start_num, number, otp_row;
/*
* Copy the current state of the framebuffer config; we will update
@@ -322,6 +323,89 @@ static void
bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value)
0);
resplen = VCHI_BUSADDR_SIZE;
break;
+
+ /* Customer OTP */
+
+ case RPI_FWREQ_GET_CUSTOMER_OTP:
+ start_num = ldl_le_phys(&s->dma_as, value + 12);
+ number = ldl_le_phys(&s->dma_as, value + 16);
+
+ resplen = 8 + 4 * number;
+
+ for (n = start_num; n < start_num + number &&
+ n < BCM2835_OTP_CUSTOMER_OTP_LEN; n++) {
+ otp_row = bcm2835_otp_get_row(s->otp,
+ BCM2835_OTP_CUSTOMER_OTP + n);
+ stl_le_phys(&s->dma_as,
+ value + 20 + ((n - start_num) << 2), otp_row);
+ }
+ break;
+ case RPI_FWREQ_SET_CUSTOMER_OTP:
+ start_num = ldl_le_phys(&s->dma_as, value + 12);
+ number = ldl_le_phys(&s->dma_as, value + 16);
+
+ resplen = 4;
+
+ /* Magic numbers to permanently lock customer OTP */
+ if (start_num == BCM2835_OTP_LOCK_NUM1 &&
+ number == BCM2835_OTP_LOCK_NUM2) {
+ bcm2835_otp_set_row(s->otp,
+ BCM2835_OTP_ROW_32,
+ BCM2835_OTP_ROW_32_LOCK);
+ break;
+ }
+
+ /* If row 32 has the lock bit, don't allow further writes */
+ if (bcm2835_otp_get_row(s->otp, BCM2835_OTP_ROW_32) &
+ BCM2835_OTP_ROW_32_LOCK) {
+ break;
+ }
+
+ for (n = start_num; n < start_num + number &&
+ n < BCM2835_OTP_CUSTOMER_OTP_LEN; n++) {
+ otp_row = ldl_le_phys(&s->dma_as,
+ value + 20 + ((n - start_num) << 2));
+ bcm2835_otp_set_row(s->otp,
+ BCM2835_OTP_CUSTOMER_OTP + n, otp_row);
+ }
+ break;
+
+ /* Device-specific private key */
+
+ case RPI_FWREQ_GET_PRIVATE_KEY:
+ start_num = ldl_le_phys(&s->dma_as, value + 12);
+ number = ldl_le_phys(&s->dma_as, value + 16);
+
+ resplen = 8 + 4 * number;
+
+ for (n = start_num; n < start_num + number &&
+ n < BCM2835_OTP_PRIVATE_KEY_LEN; n++) {
+ otp_row = bcm2835_otp_get_row(s->otp,
+ BCM2835_OTP_PRIVATE_KEY + n);
+ stl_le_phys(&s->dma_as,
+ value + 20 + ((n - start_num) << 2), otp_row);
+ }
+ break;
+ case RPI_FWREQ_SET_PRIVATE_KEY:
+ start_num = ldl_le_phys(&s->dma_as, value + 12);
+ number = ldl_le_phys(&s->dma_as, value + 16);
+
+ resplen = 4;
+
+ /* If row 32 has the lock bit, don't allow further writes */
+ if (bcm2835_otp_get_row(s->otp, BCM2835_OTP_ROW_32) &
+ BCM2835_OTP_ROW_32_LOCK) {
+ break;
+ }
+
+ for (n = start_num; n < start_num + number &&
+ n < BCM2835_OTP_PRIVATE_KEY_LEN; n++) {
+ otp_row = ldl_le_phys(&s->dma_as,
+ value + 20 + ((n - start_num) << 2));
+ bcm2835_otp_set_row(s->otp,
+ BCM2835_OTP_PRIVATE_KEY + n, otp_row);
+ }
+ break;
default:
qemu_log_mask(LOG_UNIMP,
"bcm2835_property: unhandled tag 0x%08x\n", tag);
@@ -449,6 +533,9 @@ static void bcm2835_property_realize(DeviceState *dev,
Error **errp)
s->dma_mr = MEMORY_REGION(obj);
address_space_init(&s->dma_as, s->dma_mr, TYPE_BCM2835_PROPERTY "-memory");
+ obj = object_property_get_link(OBJECT(dev), "otp", &error_abort);
+ s->otp = BCM2835_OTP(obj);
+
/* TODO: connect to MAC address of USB NIC device, once we emulate it */
qemu_macaddr_default_if_unset(&s->macaddr);
--
2.34.1
