On 19/7/24 22:21, Mark Cave-Ayland wrote:
On 19/07/2024 16:16, Philippe Mathieu-Daudé wrote:

FIFOs can be resized at runtime. Introduce the
fifo8_change_capacity() method to do that.
When capacity is changed, the FIFO must be reset.

Signed-off-by: Philippe Mathieu-Daudé <phi...@linaro.org>
---
  include/qemu/fifo8.h | 10 ++++++++++
  util/fifo8.c         |  7 +++++++
  2 files changed, 17 insertions(+)

diff --git a/include/qemu/fifo8.h b/include/qemu/fifo8.h
index c6295c6ff0..9fe0555a24 100644
--- a/include/qemu/fifo8.h
+++ b/include/qemu/fifo8.h
@@ -31,6 +31,16 @@ void fifo8_create(Fifo8 *fifo, uint32_t capacity);
  void fifo8_destroy(Fifo8 *fifo);
+/**
+ * fifo8_change_capacity:
+ * @fifo: struct Fifo8 to change the capacity
+ * @capacity: new capacity of the FIFO
+ *
+ * Change a FIFO capacity to the specified size. The FIFO is reset.
+ */
+
+void fifo8_change_capacity(Fifo8 *fifo, uint32_t capacity);
+
  /**
   * fifo8_push:
   * @fifo: FIFO to push to
diff --git a/util/fifo8.c b/util/fifo8.c
index 2925fe5611..c453afd774 100644
--- a/util/fifo8.c
+++ b/util/fifo8.c
@@ -34,6 +34,13 @@ void fifo8_destroy(Fifo8 *fifo)
      g_free(fifo->data);
  }
+void fifo8_change_capacity(Fifo8 *fifo, uint32_t capacity)
+{
+    fifo->data = g_renew(uint8_t, fifo->data, capacity);
+    fifo->capacity = capacity;
+    fifo8_reset(fifo);
+}
+
  void fifo8_push(Fifo8 *fifo, uint8_t data)
  {
      assert(fifo->num < fifo->capacity);

The changes look okay, however I'm a little confused as to why this is needed as generally hardware FIFOs are a fixed size? Presumably this is related to the PL011 series?

Indeed, this is to model trying to stay as close as possible to
the datasheet, which states:

  2.4.3 UART operation

    Disabling the FIFOs

      Additionally, you can disable the FIFOs. In this case,
      the transmit and receive sides of the UART have 1-byte
      holding registers (the bottom entry of the FIFOs). The
      overrun bit is set when a word has been received, and
      the previous one was not yet read. In this implementation,
      the FIFOs are not physically disabled, but the flags are
      manipulated to give the illusion of a 1-byte register.


Reply via email to