Remove stray direct access Signed-off-by: Alex Williamson <alex.william...@redhat.com> ---
hw/acpi_piix4.c | 53 +++++++++++++++++++++++++++-------------------------- 1 files changed, 27 insertions(+), 26 deletions(-) diff --git a/hw/acpi_piix4.c b/hw/acpi_piix4.c index 6ee832a..c1b1532 100644 --- a/hw/acpi_piix4.c +++ b/hw/acpi_piix4.c @@ -173,11 +173,12 @@ static const IORangeOps pm_iorange_ops = { static void apm_ctrl_changed(uint32_t val, void *arg) { PIIX4PMState *s = arg; + PCIDevice *dev = &s->dev; /* ACPI specs 3.0, 4.7.2.5 */ acpi_pm1_cnt_update(&s->ar, val == ACPI_ENABLE, val == ACPI_DISABLE); - if (s->dev.config[0x5b] & (1 << 1)) { + if (pci_get_byte(dev->config + 0x5b) & (1 << 1)) { if (s->smi_irq) { qemu_irq_raise(s->smi_irq); } @@ -191,10 +192,11 @@ static void acpi_dbg_writel(void *opaque, uint32_t addr, uint32_t val) static void pm_io_space_update(PIIX4PMState *s) { + PCIDevice *dev = &s->dev; uint32_t pm_io_base; - if (s->dev.config[0x80] & 1) { - pm_io_base = le32_to_cpu(*(uint32_t *)(s->dev.config + 0x40)); + if (pci_get_byte(dev->config + 0x80) & 1) { + pm_io_base = pci_get_long(dev->config + 0x40); pm_io_base &= 0xffc0; /* XXX: need to improve memory and ioport allocation */ @@ -297,16 +299,16 @@ static void piix4_update_hotplug(PIIX4PMState *s) static void piix4_reset(void *opaque) { PIIX4PMState *s = opaque; - uint8_t *pci_conf = s->dev.config; + PCIDevice *dev = &s->dev; - pci_conf[0x58] = 0; - pci_conf[0x59] = 0; - pci_conf[0x5a] = 0; - pci_conf[0x5b] = 0; + pci_set_byte(dev->config + 0x58, 0); + pci_set_byte(dev->config + 0x59, 0); + pci_set_byte(dev->config + 0x5a, 0); + pci_set_byte(dev->config + 0x5b, 0); if (s->kvm_enabled) { /* Mark SMM as already inited (until KVM supports SMM). */ - pci_conf[0x5B] = 0x02; + pci_set_byte(dev->config + 0x5B, 0x02); } piix4_update_hotplug(s); } @@ -322,13 +324,14 @@ static void piix4_powerdown(void *opaque, int irq, int power_failing) static void piix4_pm_machine_ready(Notifier *n, void *opaque) { PIIX4PMState *s = container_of(n, PIIX4PMState, machine_ready); - uint8_t *pci_conf; + PCIDevice *dev = &s->dev; - pci_conf = s->dev.config; - pci_conf[0x5f] = (isa_is_ioport_assigned(0x378) ? 0x80 : 0) | 0x10; - pci_conf[0x63] = 0x60; - pci_conf[0x67] = (isa_is_ioport_assigned(0x3f8) ? 0x08 : 0) | - (isa_is_ioport_assigned(0x2f8) ? 0x90 : 0); + pci_set_byte(dev->config + 0x5f, + (isa_is_ioport_assigned(0x378) ? 0x80 : 0) | 0x10); + pci_set_byte(dev->config + 0x63, 0x60); + pci_set_byte(dev->config + 0x67, + (isa_is_ioport_assigned(0x3f8) ? 0x08 : 0) | + (isa_is_ioport_assigned(0x2f8) ? 0x90 : 0)); } @@ -337,18 +340,16 @@ static PIIX4PMState *global_piix4_pm_state; /* cpu hotadd */ static int piix4_pm_initfn(PCIDevice *dev) { PIIX4PMState *s = DO_UPCAST(PIIX4PMState, dev, dev); - uint8_t *pci_conf; /* for cpu hotadd */ global_piix4_pm_state = s; - pci_conf = s->dev.config; - pci_conf[0x06] = 0x80; - pci_conf[0x07] = 0x02; - pci_conf[0x09] = 0x00; - pci_conf[0x3d] = 0x01; // interrupt pin 1 + pci_set_byte(dev->config + 0x06, 0x80); + pci_set_byte(dev->config + 0x07, 0x02); + pci_set_byte(dev->config + 0x09, 0x00); + pci_set_byte(dev->config + 0x3d, 0x01); /* interrupt pin 1 */ - pci_conf[0x40] = 0x01; /* PM io base read only bit */ + pci_set_byte(dev->config + 0x40, 0x01); /* PM io base read only bit */ /* APM */ apm_init(&s->apm, apm_ctrl_changed, s); @@ -358,14 +359,14 @@ static int piix4_pm_initfn(PCIDevice *dev) if (s->kvm_enabled) { /* Mark SMM as already inited to prevent SMM from running. KVM does not * support SMM mode. */ - pci_conf[0x5B] = 0x02; + pci_set_byte(dev->config + 0x5B, 0x02); } /* XXX: which specification is used ? The i82731AB has different mappings */ - pci_conf[0x90] = s->smb_io_base | 1; - pci_conf[0x91] = s->smb_io_base >> 8; - pci_conf[0xd2] = 0x09; + pci_set_byte(dev->config + 0x90, s->smb_io_base | 1); + pci_set_byte(dev->config + 0x91, s->smb_io_base >> 8); + pci_set_byte(dev->config + 0xd2, 0x09); register_ioport_write(s->smb_io_base, 64, 1, smb_ioport_writeb, &s->smb); register_ioport_read(s->smb_io_base, 64, 1, smb_ioport_readb, &s->smb);