Remove the pxa2xx-specific pxa2xx_mmci device.
Signed-off-by: Peter Maydell <peter.mayd...@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <phi...@linaro.org>
Tested-by: Philippe Mathieu-Daudé <phi...@linaro.org>
Message-id: 20240903160751.4100218-17-peter.mayd...@linaro.org
---
include/hw/arm/pxa.h | 10 -
hw/sd/pxa2xx_mmci.c | 594 -------------------------------------------
hw/sd/meson.build | 1 -
hw/sd/trace-events | 4 -
4 files changed, 609 deletions(-)
delete mode 100644 hw/sd/pxa2xx_mmci.c
diff --git a/include/hw/arm/pxa.h b/include/hw/arm/pxa.h
index bf7f868700a..cc4de0750af 100644
--- a/include/hw/arm/pxa.h
+++ b/include/hw/arm/pxa.h
@@ -86,16 +86,6 @@ PXA2xxLCDState *pxa2xx_lcdc_init(MemoryRegion *sysmem,
hwaddr base, qemu_irq irq);
void pxa2xx_lcd_vsync_notifier(PXA2xxLCDState *s, qemu_irq handler);
-/* pxa2xx_mmci.c */
-#define TYPE_PXA2XX_MMCI "pxa2xx-mmci"
-OBJECT_DECLARE_SIMPLE_TYPE(PXA2xxMMCIState, PXA2XX_MMCI)
-
-PXA2xxMMCIState *pxa2xx_mmci_init(MemoryRegion *sysmem,
- hwaddr base,
- qemu_irq irq, qemu_irq rx_dma, qemu_irq tx_dma);
-void pxa2xx_mmci_handlers(PXA2xxMMCIState *s, qemu_irq readonly,
- qemu_irq coverswitch);
-
/* pxa2xx_pcmcia.c */
#define TYPE_PXA2XX_PCMCIA "pxa2xx-pcmcia"
OBJECT_DECLARE_SIMPLE_TYPE(PXA2xxPCMCIAState, PXA2XX_PCMCIA)
diff --git a/hw/sd/pxa2xx_mmci.c b/hw/sd/pxa2xx_mmci.c
deleted file mode 100644
index a834be7cb12..00000000000
--- a/hw/sd/pxa2xx_mmci.c
+++ /dev/null
@@ -1,594 +0,0 @@
-/*
- * Intel XScale PXA255/270 MultiMediaCard/SD/SDIO Controller emulation.
- *
- * Copyright (c) 2006 Openedhand Ltd.
- * Written by Andrzej Zaborowski <bal...@zabor.org>
- *
- * This code is licensed under the GPLv2.
- *
- * Contributions after 2012-01-13 are licensed under the terms of the
- * GNU GPL, version 2 or (at your option) any later version.
- */
-
-#include "qemu/osdep.h"
-#include "qapi/error.h"
-#include "hw/irq.h"
-#include "hw/sysbus.h"
-#include "migration/vmstate.h"
-#include "hw/arm/pxa.h"
-#include "hw/sd/sd.h"
-#include "hw/qdev-properties.h"
-#include "qemu/log.h"
-#include "qemu/module.h"
-#include "trace.h"
-#include "qom/object.h"
-
-#define TYPE_PXA2XX_MMCI_BUS "pxa2xx-mmci-bus"
-/* This is reusing the SDBus typedef from SD_BUS */
-DECLARE_INSTANCE_CHECKER(SDBus, PXA2XX_MMCI_BUS,
- TYPE_PXA2XX_MMCI_BUS)
-
-struct PXA2xxMMCIState {
- SysBusDevice parent_obj;
-
- MemoryRegion iomem;
- qemu_irq irq;
- qemu_irq rx_dma;
- qemu_irq tx_dma;
- qemu_irq inserted;
- qemu_irq readonly;
-
- BlockBackend *blk;
- SDBus sdbus;
-
- uint32_t status;
- uint32_t clkrt;
- uint32_t spi;
- uint32_t cmdat;
- uint32_t resp_tout;
- uint32_t read_tout;
- int32_t blklen;
- int32_t numblk;
- uint32_t intmask;
- uint32_t intreq;
- int32_t cmd;
- uint32_t arg;
-
- int32_t active;
- int32_t bytesleft;
- uint8_t tx_fifo[64];
- uint32_t tx_start;
- uint32_t tx_len;
- uint8_t rx_fifo[32];
- uint32_t rx_start;
- uint32_t rx_len;
- uint16_t resp_fifo[9];
- uint32_t resp_len;
-
- int32_t cmdreq;
-};
-
-static bool pxa2xx_mmci_vmstate_validate(void *opaque, int version_id)
-{
- PXA2xxMMCIState *s = opaque;
-
- return s->tx_start < ARRAY_SIZE(s->tx_fifo)
- && s->rx_start < ARRAY_SIZE(s->rx_fifo)
- && s->tx_len <= ARRAY_SIZE(s->tx_fifo)
- && s->rx_len <= ARRAY_SIZE(s->rx_fifo)
- && s->resp_len <= ARRAY_SIZE(s->resp_fifo);
-}
-
-
-static const VMStateDescription vmstate_pxa2xx_mmci = {
- .name = "pxa2xx-mmci",
- .version_id = 2,
- .minimum_version_id = 2,
- .fields = (const VMStateField[]) {
- VMSTATE_UINT32(status, PXA2xxMMCIState),
- VMSTATE_UINT32(clkrt, PXA2xxMMCIState),
- VMSTATE_UINT32(spi, PXA2xxMMCIState),
- VMSTATE_UINT32(cmdat, PXA2xxMMCIState),
- VMSTATE_UINT32(resp_tout, PXA2xxMMCIState),
- VMSTATE_UINT32(read_tout, PXA2xxMMCIState),
- VMSTATE_INT32(blklen, PXA2xxMMCIState),
- VMSTATE_INT32(numblk, PXA2xxMMCIState),
- VMSTATE_UINT32(intmask, PXA2xxMMCIState),
- VMSTATE_UINT32(intreq, PXA2xxMMCIState),
- VMSTATE_INT32(cmd, PXA2xxMMCIState),
- VMSTATE_UINT32(arg, PXA2xxMMCIState),
- VMSTATE_INT32(cmdreq, PXA2xxMMCIState),
- VMSTATE_INT32(active, PXA2xxMMCIState),
- VMSTATE_INT32(bytesleft, PXA2xxMMCIState),
- VMSTATE_UINT32(tx_start, PXA2xxMMCIState),
- VMSTATE_UINT32(tx_len, PXA2xxMMCIState),
- VMSTATE_UINT32(rx_start, PXA2xxMMCIState),
- VMSTATE_UINT32(rx_len, PXA2xxMMCIState),
- VMSTATE_UINT32(resp_len, PXA2xxMMCIState),
- VMSTATE_VALIDATE("fifo size incorrect", pxa2xx_mmci_vmstate_validate),
- VMSTATE_UINT8_ARRAY(tx_fifo, PXA2xxMMCIState, 64),
- VMSTATE_UINT8_ARRAY(rx_fifo, PXA2xxMMCIState, 32),
- VMSTATE_UINT16_ARRAY(resp_fifo, PXA2xxMMCIState, 9),
- VMSTATE_END_OF_LIST()
- }
-};
-
-#define MMC_STRPCL 0x00 /* MMC Clock Start/Stop register */
-#define MMC_STAT 0x04 /* MMC Status register */
-#define MMC_CLKRT 0x08 /* MMC Clock Rate register */
-#define MMC_SPI 0x0c /* MMC SPI Mode register */
-#define MMC_CMDAT 0x10 /* MMC Command/Data register */
-#define MMC_RESTO 0x14 /* MMC Response Time-Out register */
-#define MMC_RDTO 0x18 /* MMC Read Time-Out register */
-#define MMC_BLKLEN 0x1c /* MMC Block Length register */
-#define MMC_NUMBLK 0x20 /* MMC Number of Blocks register */
-#define MMC_PRTBUF 0x24 /* MMC Buffer Partly Full register */
-#define MMC_I_MASK 0x28 /* MMC Interrupt Mask register */
-#define MMC_I_REG 0x2c /* MMC Interrupt Request register */
-#define MMC_CMD 0x30 /* MMC Command register */
-#define MMC_ARGH 0x34 /* MMC Argument High register */
-#define MMC_ARGL 0x38 /* MMC Argument Low register */
-#define MMC_RES 0x3c /* MMC Response FIFO */
-#define MMC_RXFIFO 0x40 /* MMC Receive FIFO */
-#define MMC_TXFIFO 0x44 /* MMC Transmit FIFO */
-#define MMC_RDWAIT 0x48 /* MMC RD_WAIT register */
-#define MMC_BLKS_REM 0x4c /* MMC Blocks Remaining register */
-
-/* Bitfield masks */
-#define STRPCL_STOP_CLK (1 << 0)
-#define STRPCL_STRT_CLK (1 << 1)
-#define STAT_TOUT_RES (1 << 1)
-#define STAT_CLK_EN (1 << 8)
-#define STAT_DATA_DONE (1 << 11)
-#define STAT_PRG_DONE (1 << 12)
-#define STAT_END_CMDRES (1 << 13)
-#define SPI_SPI_MODE (1 << 0)
-#define CMDAT_RES_TYPE (3 << 0)
-#define CMDAT_DATA_EN (1 << 2)
-#define CMDAT_WR_RD (1 << 3)
-#define CMDAT_DMA_EN (1 << 7)
-#define CMDAT_STOP_TRAN (1 << 10)
-#define INT_DATA_DONE (1 << 0)
-#define INT_PRG_DONE (1 << 1)
-#define INT_END_CMD (1 << 2)
-#define INT_STOP_CMD (1 << 3)
-#define INT_CLK_OFF (1 << 4)
-#define INT_RXFIFO_REQ (1 << 5)
-#define INT_TXFIFO_REQ (1 << 6)
-#define INT_TINT (1 << 7)
-#define INT_DAT_ERR (1 << 8)
-#define INT_RES_ERR (1 << 9)
-#define INT_RD_STALLED (1 << 10)
-#define INT_SDIO_INT (1 << 11)
-#define INT_SDIO_SACK (1 << 12)
-#define PRTBUF_PRT_BUF (1 << 0)
-
-/* Route internal interrupt lines to the global IC and DMA */
-static void pxa2xx_mmci_int_update(PXA2xxMMCIState *s)
-{
- uint32_t mask = s->intmask;
- if (s->cmdat & CMDAT_DMA_EN) {
- mask |= INT_RXFIFO_REQ | INT_TXFIFO_REQ;
-
- qemu_set_irq(s->rx_dma, !!(s->intreq & INT_RXFIFO_REQ));
- qemu_set_irq(s->tx_dma, !!(s->intreq & INT_TXFIFO_REQ));
- }
-
- qemu_set_irq(s->irq, !!(s->intreq & ~mask));
-}
-
-static void pxa2xx_mmci_fifo_update(PXA2xxMMCIState *s)
-{
- if (!s->active)
- return;
-
- if (s->cmdat & CMDAT_WR_RD) {
- while (s->bytesleft && s->tx_len) {
- sdbus_write_byte(&s->sdbus, s->tx_fifo[s->tx_start++]);
- s->tx_start &= 0x1f;
- s->tx_len --;
- s->bytesleft --;
- }
- if (s->bytesleft)
- s->intreq |= INT_TXFIFO_REQ;
- } else
- while (s->bytesleft && s->rx_len < 32) {
- s->rx_fifo[(s->rx_start + (s->rx_len ++)) & 0x1f] =
- sdbus_read_byte(&s->sdbus);
- s->bytesleft --;
- s->intreq |= INT_RXFIFO_REQ;
- }
-
- if (!s->bytesleft) {
- s->active = 0;
- s->intreq |= INT_DATA_DONE;
- s->status |= STAT_DATA_DONE;
-
- if (s->cmdat & CMDAT_WR_RD) {
- s->intreq |= INT_PRG_DONE;
- s->status |= STAT_PRG_DONE;
- }
- }
-
- pxa2xx_mmci_int_update(s);
-}
-
-static void pxa2xx_mmci_wakequeues(PXA2xxMMCIState *s)
-{
- int rsplen, i;
- SDRequest request;
- uint8_t response[16];
-
- s->active = 1;
- s->rx_len = 0;
- s->tx_len = 0;
- s->cmdreq = 0;
-
- request.cmd = s->cmd;
- request.arg = s->arg;
- request.crc = 0; /* FIXME */
-
- rsplen = sdbus_do_command(&s->sdbus, &request, response);
- s->intreq |= INT_END_CMD;
-
- memset(s->resp_fifo, 0, sizeof(s->resp_fifo));
- switch (s->cmdat & CMDAT_RES_TYPE) {
-#define PXAMMCI_RESP(wd, value0, value1) \
- s->resp_fifo[(wd) + 0] |= (value0); \
- s->resp_fifo[(wd) + 1] |= (value1) << 8;
- case 0: /* No response */
- goto complete;
-
- case 1: /* R1, R4, R5 or R6 */
- if (rsplen < 4)
- goto timeout;
- goto complete;
-
- case 2: /* R2 */
- if (rsplen < 16)
- goto timeout;
- goto complete;
-
- case 3: /* R3 */
- if (rsplen < 4)
- goto timeout;
- goto complete;
-
- complete:
- for (i = 0; rsplen > 0; i ++, rsplen -= 2) {
- PXAMMCI_RESP(i, response[i * 2], response[i * 2 + 1]);
- }
- s->status |= STAT_END_CMDRES;
-
- if (!(s->cmdat & CMDAT_DATA_EN))
- s->active = 0;
- else
- s->bytesleft = s->numblk * s->blklen;
-
- s->resp_len = 0;
- break;
-
- timeout:
- s->active = 0;
- s->status |= STAT_TOUT_RES;
- break;
- }
-
- pxa2xx_mmci_fifo_update(s);
-}
-
-static uint64_t pxa2xx_mmci_read(void *opaque, hwaddr offset, unsigned size)
-{
- PXA2xxMMCIState *s = (PXA2xxMMCIState *) opaque;
- uint32_t ret = 0;
-
- switch (offset) {
- case MMC_STRPCL:
- break;
- case MMC_STAT:
- ret = s->status;
- break;
- case MMC_CLKRT:
- ret = s->clkrt;
- break;
- case MMC_SPI:
- ret = s->spi;
- break;
- case MMC_CMDAT:
- ret = s->cmdat;
- break;
- case MMC_RESTO:
- ret = s->resp_tout;
- break;
- case MMC_RDTO:
- ret = s->read_tout;
- break;
- case MMC_BLKLEN:
- ret = s->blklen;
- break;
- case MMC_NUMBLK:
- ret = s->numblk;
- break;
- case MMC_PRTBUF:
- break;
- case MMC_I_MASK:
- ret = s->intmask;
- break;
- case MMC_I_REG:
- ret = s->intreq;
- break;
- case MMC_CMD:
- ret = s->cmd | 0x40;
- break;
- case MMC_ARGH:
- ret = s->arg >> 16;
- break;
- case MMC_ARGL:
- ret = s->arg & 0xffff;
- break;
- case MMC_RES:
- ret = (s->resp_len < 9) ? s->resp_fifo[s->resp_len++] : 0;
- break;
- case MMC_RXFIFO:
- while (size-- && s->rx_len) {
- ret |= s->rx_fifo[s->rx_start++] << (size << 3);
- s->rx_start &= 0x1f;
- s->rx_len --;
- }
- s->intreq &= ~INT_RXFIFO_REQ;
- pxa2xx_mmci_fifo_update(s);
- break;
- case MMC_RDWAIT:
- break;
- case MMC_BLKS_REM:
- ret = s->numblk;
- break;
- default:
- qemu_log_mask(LOG_GUEST_ERROR,
- "%s: incorrect register 0x%02" HWADDR_PRIx "\n",
- __func__, offset);
- }
- trace_pxa2xx_mmci_read(size, offset, ret);
-
- return ret;
-}
-
-static void pxa2xx_mmci_write(void *opaque,
- hwaddr offset, uint64_t value, unsigned size)
-{
- PXA2xxMMCIState *s = (PXA2xxMMCIState *) opaque;
-
- trace_pxa2xx_mmci_write(size, offset, value);
- switch (offset) {
- case MMC_STRPCL:
- if (value & STRPCL_STRT_CLK) {
- s->status |= STAT_CLK_EN;
- s->intreq &= ~INT_CLK_OFF;
-
- if (s->cmdreq && !(s->cmdat & CMDAT_STOP_TRAN)) {
- s->status &= STAT_CLK_EN;
- pxa2xx_mmci_wakequeues(s);
- }
- }
-
- if (value & STRPCL_STOP_CLK) {
- s->status &= ~STAT_CLK_EN;
- s->intreq |= INT_CLK_OFF;
- s->active = 0;
- }
-
- pxa2xx_mmci_int_update(s);
- break;
-
- case MMC_CLKRT:
- s->clkrt = value & 7;
- break;
-
- case MMC_SPI:
- s->spi = value & 0xf;
- if (value & SPI_SPI_MODE) {
- qemu_log_mask(LOG_GUEST_ERROR,
- "%s: attempted to use card in SPI mode\n", __func__);
- }
- break;
-
- case MMC_CMDAT:
- s->cmdat = value & 0x3dff;
- s->active = 0;
- s->cmdreq = 1;
- if (!(value & CMDAT_STOP_TRAN)) {
- s->status &= STAT_CLK_EN;
-
- if (s->status & STAT_CLK_EN)
- pxa2xx_mmci_wakequeues(s);
- }
-
- pxa2xx_mmci_int_update(s);
- break;
-
- case MMC_RESTO:
- s->resp_tout = value & 0x7f;
- break;
-
- case MMC_RDTO:
- s->read_tout = value & 0xffff;
- break;
-
- case MMC_BLKLEN:
- s->blklen = value & 0xfff;
- break;
-
- case MMC_NUMBLK:
- s->numblk = value & 0xffff;
- break;
-
- case MMC_PRTBUF:
- if (value & PRTBUF_PRT_BUF) {
- s->tx_start ^= 32;
- s->tx_len = 0;
- }
- pxa2xx_mmci_fifo_update(s);
- break;
-
- case MMC_I_MASK:
- s->intmask = value & 0x1fff;
- pxa2xx_mmci_int_update(s);
- break;
-
- case MMC_CMD:
- s->cmd = value & 0x3f;
- break;
-
- case MMC_ARGH:
- s->arg &= 0x0000ffff;
- s->arg |= value << 16;
- break;
-
- case MMC_ARGL:
- s->arg &= 0xffff0000;
- s->arg |= value & 0x0000ffff;
- break;
-
- case MMC_TXFIFO:
- while (size-- && s->tx_len < 0x20)
- s->tx_fifo[(s->tx_start + (s->tx_len ++)) & 0x1f] =
- (value >> (size << 3)) & 0xff;
- s->intreq &= ~INT_TXFIFO_REQ;
- pxa2xx_mmci_fifo_update(s);
- break;
-
- case MMC_RDWAIT:
- case MMC_BLKS_REM:
- break;
-
- default:
- qemu_log_mask(LOG_GUEST_ERROR,
- "%s: incorrect reg 0x%02" HWADDR_PRIx " "
- "(value 0x%08" PRIx64 ")\n", __func__, offset, value);
- }
-}
-
-static const MemoryRegionOps pxa2xx_mmci_ops = {
- .read = pxa2xx_mmci_read,
- .write = pxa2xx_mmci_write,
- .endianness = DEVICE_NATIVE_ENDIAN,
-};
-
-PXA2xxMMCIState *pxa2xx_mmci_init(MemoryRegion *sysmem,
- hwaddr base,
- qemu_irq irq, qemu_irq rx_dma, qemu_irq tx_dma)
-{
- DeviceState *dev;
-
- dev = sysbus_create_simple(TYPE_PXA2XX_MMCI, base, irq);
- qdev_connect_gpio_out_named(dev, "rx-dma", 0, rx_dma);
- qdev_connect_gpio_out_named(dev, "tx-dma", 0, tx_dma);
-
- return PXA2XX_MMCI(dev);
-}
-
-static void pxa2xx_mmci_set_inserted(DeviceState *dev, bool inserted)
-{
- PXA2xxMMCIState *s = PXA2XX_MMCI(dev);
-
- qemu_set_irq(s->inserted, inserted);
-}
-
-static void pxa2xx_mmci_set_readonly(DeviceState *dev, bool readonly)
-{
- PXA2xxMMCIState *s = PXA2XX_MMCI(dev);
-
- qemu_set_irq(s->readonly, readonly);
-}
-
-void pxa2xx_mmci_handlers(PXA2xxMMCIState *s, qemu_irq readonly,
- qemu_irq coverswitch)
-{
- DeviceState *dev = DEVICE(s);
-
- s->readonly = readonly;
- s->inserted = coverswitch;
-
- pxa2xx_mmci_set_inserted(dev, sdbus_get_inserted(&s->sdbus));
- pxa2xx_mmci_set_readonly(dev, sdbus_get_readonly(&s->sdbus));
-}
-
-static void pxa2xx_mmci_reset(DeviceState *d)
-{
- PXA2xxMMCIState *s = PXA2XX_MMCI(d);
-
- s->status = 0;
- s->clkrt = 0;
- s->spi = 0;
- s->cmdat = 0;
- s->resp_tout = 0;
- s->read_tout = 0;
- s->blklen = 0;
- s->numblk = 0;
- s->intmask = 0;
- s->intreq = 0;
- s->cmd = 0;
- s->arg = 0;
- s->active = 0;
- s->bytesleft = 0;
- s->tx_start = 0;
- s->tx_len = 0;
- s->rx_start = 0;
- s->rx_len = 0;
- s->resp_len = 0;
- s->cmdreq = 0;
- memset(s->tx_fifo, 0, sizeof(s->tx_fifo));
- memset(s->rx_fifo, 0, sizeof(s->rx_fifo));
- memset(s->resp_fifo, 0, sizeof(s->resp_fifo));
-}
-
-static void pxa2xx_mmci_instance_init(Object *obj)
-{
- PXA2xxMMCIState *s = PXA2XX_MMCI(obj);
- SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
- DeviceState *dev = DEVICE(obj);
-
- memory_region_init_io(&s->iomem, obj, &pxa2xx_mmci_ops, s,
- "pxa2xx-mmci", 0x00100000);
- sysbus_init_mmio(sbd, &s->iomem);
- sysbus_init_irq(sbd, &s->irq);
- qdev_init_gpio_out_named(dev, &s->rx_dma, "rx-dma", 1);
- qdev_init_gpio_out_named(dev, &s->tx_dma, "tx-dma", 1);
-
- qbus_init(&s->sdbus, sizeof(s->sdbus),
- TYPE_PXA2XX_MMCI_BUS, DEVICE(obj), "sd-bus");
-}
-
-static void pxa2xx_mmci_class_init(ObjectClass *klass, void *data)
-{
- DeviceClass *dc = DEVICE_CLASS(klass);
-
- dc->vmsd = &vmstate_pxa2xx_mmci;
- device_class_set_legacy_reset(dc, pxa2xx_mmci_reset);
-}
-
-static void pxa2xx_mmci_bus_class_init(ObjectClass *klass, void *data)
-{
- SDBusClass *sbc = SD_BUS_CLASS(klass);
-
- sbc->set_inserted = pxa2xx_mmci_set_inserted;
- sbc->set_readonly = pxa2xx_mmci_set_readonly;
-}
-
-static const TypeInfo pxa2xx_mmci_types[] = {
- {
- .name = TYPE_PXA2XX_MMCI,
- .parent = TYPE_SYS_BUS_DEVICE,
- .instance_size = sizeof(PXA2xxMMCIState),
- .instance_init = pxa2xx_mmci_instance_init,
- .class_init = pxa2xx_mmci_class_init,
- },
- {
- .name = TYPE_PXA2XX_MMCI_BUS,
- .parent = TYPE_SD_BUS,
- .instance_size = sizeof(SDBus),
- .class_init = pxa2xx_mmci_bus_class_init,
- },
-};
-
-DEFINE_TYPES(pxa2xx_mmci_types)
diff --git a/hw/sd/meson.build b/hw/sd/meson.build
index bbb75af0c9b..b43d45bc564 100644
--- a/hw/sd/meson.build
+++ b/hw/sd/meson.build
@@ -5,7 +5,6 @@ system_ss.add(when: 'CONFIG_SDHCI_PCI', if_true:
files('sdhci-pci.c'))
system_ss.add(when: 'CONFIG_SSI_SD', if_true: files('ssi-sd.c'))
system_ss.add(when: 'CONFIG_OMAP', if_true: files('omap_mmc.c'))
-system_ss.add(when: 'CONFIG_PXA2XX', if_true: files('pxa2xx_mmci.c'))
system_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2835_sdhost.c'))
system_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_sdhci.c'))
system_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true:
files('allwinner-sdhost.c'))
diff --git a/hw/sd/trace-events b/hw/sd/trace-events
index 43671dc7912..db0644256d9 100644
--- a/hw/sd/trace-events
+++ b/hw/sd/trace-events
@@ -60,10 +60,6 @@ sdcard_set_voltage(uint16_t millivolts) "%u mV"
sdcard_ext_csd_update(unsigned index, uint8_t oval, uint8_t nval) "index %u:
0x%02x -> 0x%02x"
sdcard_switch(unsigned access, unsigned index, unsigned value, unsigned set)
"SWITCH acc:%u idx:%u val:%u set:%u"
-# pxa2xx_mmci.c
-pxa2xx_mmci_read(uint8_t size, uint32_t addr, uint32_t value) "size %d addr
0x%02x value 0x%08x"
-pxa2xx_mmci_write(uint8_t size, uint32_t addr, uint32_t value) "size %d addr
0x%02x value 0x%08x"
-
# pl181.c
pl181_command_send(uint8_t cmd, uint32_t arg) "sending CMD%02d arg 0x%08"
PRIx32
pl181_command_sent(void) "command sent"
--
2.34.1
