There are no need to run a periodic timer to emulate updated-end
logic. Only run the timer when the UF is cleared.

Signed-off-by: Yang Zhang <yang.z.zh...@intel.com>
---
 hw/mc146818rtc.c |   95 +++++++++++++++++++++++++++++++++++++++++++++++++----
 1 files changed, 87 insertions(+), 8 deletions(-)

diff --git a/hw/mc146818rtc.c b/hw/mc146818rtc.c
index 3dd71ac..461e8f3 100644
--- a/hw/mc146818rtc.c
+++ b/hw/mc146818rtc.c
@@ -67,6 +67,11 @@ typedef struct RTCState {
     /* periodic timer */
     QEMUTimer *periodic_timer;
     int64_t next_periodic_time;
+    /* update-ended timer */
+    QEMUTimer *update_timer;
+    QEMUTimer *update_timer2;
+    uint64_t next_update_time;
+    uint32_t use_timer;
     uint16_t irq_reinject_on_ack_count;
     uint32_t irq_coalesced;
     uint32_t period;
@@ -132,7 +137,8 @@ static void rtc_coalesced_timer(void *opaque)
 }
 #endif

-static void rtc_timer_update(RTCState *s, int64_t current_time)
+/* handle periodic timer */
+static void periodic_timer_update(RTCState *s, int64_t current_time)
 {
     int period_code, period;
     int64_t cur_clock, next_irq_clock;
@@ -170,7 +176,7 @@ static void rtc_periodic_timer(void *opaque)
 {
     RTCState *s = opaque;

-    rtc_timer_update(s, s->next_periodic_time);
+    periodic_timer_update(s, s->next_periodic_time);
     s->cmos_data[RTC_REG_C] |= REG_C_PF;
     if (s->cmos_data[RTC_REG_B] & REG_B_PIE) {
         s->cmos_data[RTC_REG_C] |= REG_C_IRQF;
@@ -197,6 +203,59 @@ static void rtc_periodic_timer(void *opaque)
     }
 }

+/* handle update-ended timer */
+static void check_update_timer(RTCState *s)
+{
+    uint64_t next_update_time, expire_time;
+    uint64_t guest_usec;
+    qemu_del_timer(s->update_timer);
+    qemu_del_timer(s->update_timer2);
+
+    if (!((s->cmos_data[RTC_REG_C] & (REG_C_UF | REG_C_AF)) ==
+            (REG_C_UF | REG_C_AF)) && !(s->cmos_data[RTC_REG_B] & REG_B_SET)) {
+        s->use_timer = 1;
+        guest_usec = get_guest_rtc_us(s) % USEC_PER_SEC;
+        if (guest_usec >= (USEC_PER_SEC - 244)) {
+            /* RTC is in update cycle when enabling UIE */
+            s->cmos_data[RTC_REG_A] |= REG_A_UIP;
+            next_update_time = (USEC_PER_SEC - guest_usec) * NS_PER_USEC;
+            expire_time = qemu_get_clock_ns(rtc_clock) + next_update_time;
+            qemu_mod_timer(s->update_timer2, expire_time);
+        } else {
+            next_update_time = (USEC_PER_SEC - guest_usec - 244) * NS_PER_USEC;
+            expire_time = qemu_get_clock_ns(rtc_clock) + next_update_time;
+            s->next_update_time = expire_time;
+            qemu_mod_timer(s->update_timer, expire_time);
+        }
+    } else {
+        s->use_timer = 0;
+    }
+}
+
+static void rtc_update_timer(void *opaque)
+{
+    RTCState *s = opaque;
+
+    if (rtc_running(s)) {
+        s->cmos_data[RTC_REG_A] |= REG_A_UIP;
+        qemu_mod_timer(s->update_timer2,
+                        qemu_get_clock_ns(rtc_clock) + 244000UL);
+    }
+}
+
+static void rtc_update_timer2(void *opaque)
+{
+    RTCState *s = opaque;
+
+    if (rtc_running(s)) {
+        s->cmos_data[RTC_REG_C] |= REG_C_UF;
+        s->cmos_data[RTC_REG_A] &= ~REG_A_UIP;
+        s->cmos_data[RTC_REG_C] |= REG_C_IRQF;
+        qemu_irq_raise(s->irq);
+    }
+    check_update_timer(s);
+}
+
 static void rtc_set_offset(RTCState *s, bool running, bool div_reset)
 {
     if (div_reset)
@@ -250,13 +309,14 @@ static void cmos_ioport_write(void *opaque, uint32_t 
addr, uint32_t data)
                     rtc_set_time(s);
                     rtc_set_offset(s, 0, 1);
                     s->cmos_data[RTC_REG_A] &= ~REG_A_UIP;
+                    check_update_timer(s);
                     divider_reset = 0;
                 }
             }
             /* UIP bit is read only */
             s->cmos_data[RTC_REG_A] = (data & ~REG_A_UIP) |
                 (s->cmos_data[RTC_REG_A] & REG_A_UIP);
-            rtc_timer_update(s, qemu_get_clock_ns(rtc_clock));
+            periodic_timer_update(s, qemu_get_clock_ns(rtc_clock));
             break;
         case RTC_REG_B:
             if (data & REG_B_SET) {
@@ -284,7 +344,8 @@ static void cmos_ioport_write(void *opaque, uint32_t addr, 
uint32_t data)
                 }
             }
             s->cmos_data[RTC_REG_B] = data;
-            rtc_timer_update(s, qemu_get_clock_ns(rtc_clock));
+            periodic_timer_update(s, qemu_get_clock_ns(rtc_clock));
+            check_update_timer(s);
             break;
         case RTC_REG_C:
         case RTC_REG_D:
@@ -417,15 +478,25 @@ static uint32_t cmos_ioport_read(void *opaque, uint32_t 
addr)
             ret = s->cmos_data[s->cmos_index];
             break;
         case RTC_REG_A:
-            ret = s->cmos_data[s->cmos_index];
-            if (update_in_progress(s)) {
-                ret |= REG_A_UIP;
+            if (s->use_timer == 0) {
+                if (update_in_progress(s)) {
+                    s->cmos_data[s->cmos_index] |= REG_A_UIP;
+                } else {
+                    s->cmos_data[s->cmos_index] &= ~REG_A_UIP;
+                }
             }
+            ret = s->cmos_data[s->cmos_index];
             break;
         case RTC_REG_C:
             ret = s->cmos_data[s->cmos_index];
             qemu_irq_lower(s->irq);
             s->cmos_data[RTC_REG_C] = 0x00;
+            if (rtc_running(s)) {
+                rtc_calibrate_time(s);
+            }
+            if (ret & (REG_C_UF | REG_C_AF)) {
+                check_update_timer(s);
+            }
 #ifdef TARGET_I386
             if(s->irq_coalesced &&
                     (s->cmos_data[RTC_REG_B] & REG_B_PIE) &&
@@ -521,6 +592,9 @@ static const VMStateDescription vmstate_rtc = {
         VMSTATE_UINT64(old_guest_usec, RTCState),
         VMSTATE_TIMER(periodic_timer, RTCState),
         VMSTATE_INT64(next_periodic_time, RTCState),
+        VMSTATE_TIMER(update_timer, RTCState),
+        VMSTATE_TIMER(update_timer2, RTCState),
+        VMSTATE_UINT64(next_update_time, RTCState),
         VMSTATE_UINT32_V(irq_coalesced, RTCState, 2),
         VMSTATE_UINT32_V(period, RTCState, 2),
         VMSTATE_END_OF_LIST()
@@ -533,7 +607,8 @@ static void rtc_notify_clock_reset(Notifier *notifier, void 
*data)
     int64_t now = *(int64_t *)data;

     rtc_set_date_from_host(&s->dev);
-    rtc_timer_update(s, now);
+    periodic_timer_update(s, now);
+    check_update_timer(s);
 #ifdef TARGET_I386
     if (s->lost_tick_policy == LOST_TICK_SLEW) {
         rtc_coalesced_timer_update(s);
@@ -555,6 +630,7 @@ static void rtc_reset(void *opaque)

     s->cmos_data[RTC_REG_B] &= ~(REG_B_PIE | REG_B_AIE | REG_B_SQWE);
     s->cmos_data[RTC_REG_C] &= ~(REG_C_UF | REG_C_IRQF | REG_C_PF | REG_C_AF);
+    check_update_timer(s);

     qemu_irq_lower(s->irq);

@@ -625,6 +701,9 @@ static int rtc_initfn(ISADevice *dev)
 #endif

     s->periodic_timer = qemu_new_timer_ns(rtc_clock, rtc_periodic_timer, s);
+    s->update_timer = qemu_new_timer_ns(rtc_clock, rtc_update_timer, s);
+    s->update_timer2 = qemu_new_timer_ns(rtc_clock, rtc_update_timer2, s);
+    check_update_timer(s);

     s->clock_reset_notifier.notify = rtc_notify_clock_reset;
     qemu_register_clock_reset_notifier(rtc_clock, &s->clock_reset_notifier);
--
1.7.1

Reply via email to