On 7/22/2025 5:21 PM, Mathias Krause wrote:
On 22.07.25 05:45, Xiaoyao Li wrote:
On 6/20/2025 3:42 AM, Mathias Krause wrote:
KVM has a weird behaviour when a guest executes VMCALL on an AMD system
or VMMCALL on an Intel CPU. Both naturally generate an invalid opcode
exception (#UD) as they are just the wrong instruction for the CPU
given. But instead of forwarding the exception to the guest, KVM tries
to patch the guest instruction to match the host's actual hypercall
instruction. That is doomed to fail as read-only code is rather the
standard these days. But, instead of letting go the patching attempt and
falling back to #UD injection, KVM injects the page fault instead.

That's wrong on multiple levels. Not only isn't that a valid exception
to be generated by these instructions, confusing attempts to handle
them. It also destroys guest state by doing so, namely the value of CR2.

Sean attempted to fix that in KVM[1] but the patch was never applied.

Later, Oliver added a quirk bit in [2] so the behaviour can, at least,
conceptually be disabled. Paolo even called out to add this very
functionality to disable the quirk in QEMU[3]. So lets just do it.

A new property 'hypercall-patching=on|off' is added, for the very
unlikely case that there are setups that really need the patching.
However, these would be vulnerable to memory corruption attacks freely
overwriting code as they please. So, my guess is, there are exactly 0
systems out there requiring this quirk.

The default behavior is patching the hypercall for many years.

If you desire to change the default behavior, please at least keep it
unchanged for old machine version. i.e., introduce compat_property,
which sets KVMState->hypercall_patching_enabled to true.

Well, the thing is, KVM's patching is done with the effective
permissions of the guest which means, if the code in question isn't
writable from the guest's point of view, KVM's attempt to modify it will
fail. This failure isn't transparent for the guest as it sees a #PF
instead of a #UD, and that's what I'm trying to fix by disabling the quirk.

The hypercall patching was introduced in Linux commit 7aa81cc04781
("KVM: Refactor hypercall infrastructure (v3)") in v2.6.25. Until then
it was based on a dedicated hypercall page that was handled by KVM to
use the proper instruction of the KVM module in use (VMX or SVM).

Patching code was fine back then, but the introduction of DEBUG_RO_DATA
made the patching attempts fail and, ultimately, lead to Paolo handle
this with commit c1118b3602c2 ("x86: kvm: use alternatives for VMCALL
vs. VMMCALL if kernel text is read-only").

However, his change still doesn't account for the cross-vendor live
migration case (Intel<->AMD), which will still be broken, causing the
before mentioned bogus #PF, which will just lead to misleading Oops
reports, confusing the poor souls, trying to make sense of it.

IMHO, there is no valid reason for still having the patching in place as
the .text of non-ancient kernel's  will be write-protected, making
patching attempts fail. And, as they fail with a #PF instead of #UD, the
guest cannot even handle them appropriately, as there was no memory
write attempt from its point of view. Therefore the default should be to
disable it, IMO. This won't prevent guests making use of the wrong
instruction from trapping, but, at least, now they'll get the correct
exception vector and can handle it appropriately.

But you don't accout for the case that guest kernel is built without CONFIG_STRICT_KERNEL_RWX enabled, or without CONFIG_DEBUG_RO_DATA, or for whatever reason the guest's text is not readonly, and the VM needs to be migrated among different vendors (Intel <-> AMD).

Before this patch, the above usecase works well. But with this patch, the guest will gets #UD after migrated to different vendors.

I heard from some small CSPs that they do want to the ability to live migrate VMs among Intel and AMD host.


[1] https://lore.kernel.org/kvm/20211210222903.3417968-1-
sea...@google.com/
[2] https://lore.kernel.org/kvm/20220316005538.2282772-2-
oup...@google.com/
[3] https://lore.kernel.org/kvm/80e1f1d2-2d79-22b7-6665-
c00e4fe9c...@redhat.com/

Cc: Oliver Upton <oliver.up...@linux.dev>
Cc: Sean Christopherson <sea...@google.com>
Cc: Paolo Bonzini <pbonz...@redhat.com>
Signed-off-by: Mathias Krause <mini...@grsecurity.net>
---
   include/system/kvm_int.h |  1 +
   qemu-options.hx          | 10 ++++++++++
   target/i386/kvm/kvm.c    | 38 ++++++++++++++++++++++++++++++++++++++
   3 files changed, 49 insertions(+)

diff --git a/include/system/kvm_int.h b/include/system/kvm_int.h
index 756a3c0a250e..fd7129824429 100644
--- a/include/system/kvm_int.h
+++ b/include/system/kvm_int.h
@@ -159,6 +159,7 @@ struct KVMState
       uint64_t kvm_eager_split_size;  /* Eager Page Splitting chunk
size */
       struct KVMDirtyRingReaper reaper;
       struct KVMMsrEnergy msr_energy;
+    bool hypercall_patching_enabled;

IMHO, we can just name it "hypercall_patching".

Since it's a boolean type, true means enabled and false means disabled.

Ok, makes sense.


       NotifyVmexitOption notify_vmexit;
       uint32_t notify_window;
       uint32_t xen_version;
diff --git a/qemu-options.hx b/qemu-options.hx
index 1f862b19a676..c2e232649c19 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -231,6 +231,7 @@ DEF("accel", HAS_ARG, QEMU_OPTION_accel,
       "                dirty-ring-size=n (KVM dirty ring GFN count,
default 0)\n"
       "                eager-split-size=n (KVM Eager Page Split chunk
size, default 0, disabled. ARM only)\n"
       "                notify-vmexit=run|internal-error|
disable,notify-window=n (enable notify VM exit and set notify window,
x86 only)\n"
+    "                hypercall-patching=on|off (enable KVM's VMCALL/
VMMCALL hypercall patching quirk, x86 only)\n"
       "                thread=single|multi (enable multi-threaded TCG)\n"
       "                device=path (KVM device path, default /dev/
kvm)\n", QEMU_ARCH_ALL)
   SRST
@@ -313,6 +314,15 @@ SRST
           open up for a specified of time (i.e. notify-window).
           Default: notify-vmexit=run,notify-window=0.
   +    ``hypercall-patching=on|off``
+        KVM tries to recover from the wrong hypercall instruction
being used by
+        a guest by attempting to rewrite it to the one supported
natively by
+        the host CPU (VMCALL on Intel, VMMCALL for AMD systems).
However, this
+        patching may fail if the guest memory is write protected,
leading to a
+        page fault getting propagated to the guest instead of an illegal
+        instruction exception. As this may confuse guests, it gets
disabled by
+        default (x86 only).
+
       ``device=path``
           Sets the path to the KVM device node. Defaults to ``/dev/
kvm``. This
           option can be used to pass the KVM device to use via a file
descriptor
diff --git a/target/i386/kvm/kvm.c b/target/i386/kvm/kvm.c
index 56a6b9b6381a..6f5f3b95e553 100644
--- a/target/i386/kvm/kvm.c
+++ b/target/i386/kvm/kvm.c
@@ -3224,6 +3224,19 @@ static int kvm_vm_enable_energy_msrs(KVMState *s)
       return 0;
   }
   +static int kvm_vm_disable_hypercall_patching(KVMState *s)
+{
+    int valid_quirks = kvm_vm_check_extension(s,
KVM_CAP_DISABLE_QUIRKS2);
+
+    if (valid_quirks & KVM_X86_QUIRK_FIX_HYPERCALL_INSN) {
+        return kvm_vm_enable_cap(s, KVM_CAP_DISABLE_QUIRKS2, 0,
+                                 KVM_X86_QUIRK_FIX_HYPERCALL_INSN);
+    }
+
+    warn_report("kvm: disabling hypercall patching not supported");

It's not clear it's 1) KVM doesn't support/has FIX_HYPERCALL_INSN quirk
or 2) KVM has FIX_HYPERCALL_INSN quirk but doesn't allow it to be
disabled, when KVM_X86_QUIRK_FIX_HYPERCALL_INSN is not returned in
KVM_CAP_DISABLE_QUIRKS2.

If it's case 1), it can be treated as hypercall patching is disabled
thus no warning is expected.

So, I think it requires a new cap in KVM to return the enabled quirks.

KVM_CAP_DISABLE_QUIRKS2 fixes that bug of KVM_CAP_DISABLE_QUIRKS by
doing just that: returning the mask of supported quirks when queried via
KVM_CHECK_EXTENSION. So if KVM_X86_QUIRK_FIX_HYPERCALL_INSN is in that
mask, it can also be disabled. If that attempt fails (for whatever
reason), it's an error, which makes kvm_vm_enable_cap() return a
non-zero value, triggering the warn_report("kvm: failed to disable
hypercall patching quirk") in the caller.

If KVM_X86_QUIRK_FIX_HYPERCALL_INSN is missing in the
KVM_CAP_DISABLE_QUIRKS2 mask, it may either be that KVM is too old to
even have the hypercall patching (pre-v2.6.25) or does do the patching,
just doesn't have KVM_X86_QUIRK_FIX_HYPERCALL_INSN yet, which came in
Linux commit f1a9761fbb00 ("KVM: x86: Allow userspace to opt out of
hypercall patching"), which is v5.19.

Ignoring pre-v2.6.25 kernels for a moment, we can assume that KVM will
do the patching. So the lack of KVM_X86_QUIRK_FIX_HYPERCALL_INSN but
having 'hypercall_patching_enabled == false' indicates that the user
wants to disable it but QEMU cannot do so, because KVM lacks the
extension to do so. This, IMO, legitimizes the warn_report("kvm:
disabling hypercall patching not supported") -- as it's not supported.

The minimum supported kernel version is 4.5 (see commit f180e367fce4).
So pre-v2.6.25 kernels is not the case.

Surely we can list all the cases of different versions of KVM starting from v4.5 and draw the conclusion that the semantics of "valid_quirks & KVM_X86_QUIRK_FIX_HYPERCALL_INSN == 0" means KVM enables the hypercall patching quirk but don't provide the interface for userspace to disable it. So the code logic is correct.

My statement of "I think it requires a new cap in KVM to return the enabled quirks" is more for generic consideration. i.e., QEMU can know whether a quirk is enabled or not without analysing the detailed history of KVM.

Of course, it's more of the requirement on KVM to provide new interface and Current QEMU can do nothing on it. That is, current implementation of this PATCH is OK to me.


+    return 0;

I think return 0 here is to avoid the warn_report() in the caller. But
for the correct semantics, we need to return -1 to indicate that it
fails to disable the hypercall patching?

No, returning 0 here is very much on purpose, as you noticed, to avoid
the warn_report() in the caller. The already issued warn_report() is the
correct one for this case.

We can use @Error to pass the error log instead of the trick on return value.

e.g.,

--- a/target/i386/kvm/kvm.c
+++ b/target/i386/kvm/kvm.c
@@ -3228,17 +3228,24 @@ static int kvm_vm_enable_energy_msrs(KVMState *s)
     return 0;
 }

-static int kvm_vm_disable_hypercall_patching(KVMState *s)
+static int kvm_vm_disable_hypercall_patching(KVMState *s, Error **errp)
 {
     int valid_quirks = kvm_vm_check_extension(s, KVM_CAP_DISABLE_QUIRKS2);
+    int ret = -1;

     if (valid_quirks & KVM_X86_QUIRK_FIX_HYPERCALL_INSN) {
-        return kvm_vm_enable_cap(s, KVM_CAP_DISABLE_QUIRKS2, 0,
-                                 KVM_X86_QUIRK_FIX_HYPERCALL_INSN);
+        ret = kvm_vm_enable_cap(s, KVM_CAP_DISABLE_QUIRKS2, 0,
+                                KVM_X86_QUIRK_FIX_HYPERCALL_INSN);
+        if (ret) {
+            error_setg_errno(errp, -ret, "kvm: failed to disable "
+                             "hypercall patching quirk: %s",
+                             strerror(-ret));
+        }
+    } else {
+ error_setg(errp, "kvm: disabling hypercall patching not supported");
     }

-    warn_report("kvm: disabling hypercall patching not supported");
-    return 0;
+    return ret;
 }

 int kvm_arch_init(MachineState *ms, KVMState *s)
@@ -3381,8 +3388,8 @@ int kvm_arch_init(MachineState *ms, KVMState *s)
     }

     if (s->hypercall_patching_enabled == false) {
-        if (kvm_vm_disable_hypercall_patching(s)) {
-            warn_report("kvm: failed to disable hypercall patching quirk");
+        if (kvm_vm_disable_hypercall_patching(s, &local_err)) {
+            error_report_err(local_err);
         }
     }

I guess, it's a question of if disabling hypercall patching is a hard
requirement or can soft-fail. I decided for the latter, as hypercall
patching shouldn't be needed in most cases, so if it cannot be disabled,
it's mostly fine to start the VM still.


+}
+
   int kvm_arch_init(MachineState *ms, KVMState *s)
   {
       int ret;
@@ -3363,6 +3376,12 @@ int kvm_arch_init(MachineState *ms, KVMState *s)
           }
       }
   +    if (s->hypercall_patching_enabled == false) {
+        if (kvm_vm_disable_hypercall_patching(s)) {
+            warn_report("kvm: failed to disable hypercall patching
quirk");
+        }
+    }
+
       return 0;
   }
   @@ -6456,6 +6475,19 @@ void kvm_request_xsave_components(X86CPU
*cpu, uint64_t mask)
       }
   }
   +static bool kvm_arch_get_hypercall_patching(Object *obj, Error **errp)
+{
+    KVMState *s = KVM_STATE(obj);
+    return s->hypercall_patching_enabled;
+}
+
+static void kvm_arch_set_hypercall_patching(Object *obj, bool value,
+                                            Error **errp)
+{
+    KVMState *s = KVM_STATE(obj);
+    s->hypercall_patching_enabled = value;
+}
+
   static int kvm_arch_get_notify_vmexit(Object *obj, Error **errp)
   {
       KVMState *s = KVM_STATE(obj);
@@ -6589,6 +6621,12 @@ static void
kvm_arch_set_xen_evtchn_max_pirq(Object *obj, Visitor *v,
     void kvm_arch_accel_class_init(ObjectClass *oc)
   {
+    object_class_property_add_bool(oc, "hypercall-patching",
+                                   kvm_arch_get_hypercall_patching,
+                                   kvm_arch_set_hypercall_patching);
+    object_class_property_set_description(oc, "hypercall-patching",
+                                          "Enable hypercall patching
quirk");
+
       object_class_property_add_enum(oc, "notify-vmexit",
"NotifyVMexitOption",
                                      &NotifyVmexitOption_lookup,
                                      kvm_arch_get_notify_vmexit,


Thanks,
Mathias


Reply via email to