On Sat, Nov 01 2025, Bernhard Beschow <[email protected]> wrote:
> Allows the imx8mp-evk machine to run guests with KVM acceleration.
>
> Signed-off-by: Bernhard Beschow <[email protected]>
> ---
> docs/system/arm/imx8mp-evk.rst | 19 +++++++++++++++++++
> hw/arm/fsl-imx8mp.c | 34 +++++++++++++++++++++++++++++-----
> hw/arm/imx8mp-evk.c | 11 +++++++++++
> hw/arm/Kconfig | 3 ++-
> 4 files changed, 61 insertions(+), 6 deletions(-)
>
> diff --git a/docs/system/arm/imx8mp-evk.rst b/docs/system/arm/imx8mp-evk.rst
> index b2f7d29ade..75c8fbd366 100644
> --- a/docs/system/arm/imx8mp-evk.rst
> +++ b/docs/system/arm/imx8mp-evk.rst
> @@ -60,3 +60,22 @@ Now that everything is prepared the machine can be started
> as follows:
> -dtb imx8mp-evk.dtb \
> -append "root=/dev/mmcblk2p2" \
> -drive file=sdcard.img,if=sd,bus=2,format=raw,id=mmcblk2
> +
> +
> +KVM Acceleration
> +----------------
> +
> +To enable hardware-assisted acceleration via KVM, append
> +``-accel kvm -cpu host`` to the command line. While this speeds up
> performance
> +significantly, be aware of the following limitations:
> +
> +* The ``imx8mp-evk`` machine is not included under the "virtualization use
> case"
> + of :doc:`QEMU's security policy </system/security>`. This means that you
> + should not trust that it can contain malicious guests, whether it is run
> + using TCG or KVM. If you don't trust your guests and you're relying on
> QEMU to
> + be the security boundary, you want to choose another machine such as
> ``virt``.
> +* Rather than Cortex-A53 CPUs, the same CPU type as the host's will be used.
> + This is a limitation of KVM and may not work with guests with a tight
> + dependency on Cortex-A53.
> +* No EL2 and EL3 exception levels are available which is also a KVM
> limitation.
> + Direct kernel boot should work but running U-Boot, TF-A, etc. won't
> succeed.
> diff --git a/hw/arm/fsl-imx8mp.c b/hw/arm/fsl-imx8mp.c
> index 866f4d1d74..ee6f3e42d2 100644
> --- a/hw/arm/fsl-imx8mp.c
> +++ b/hw/arm/fsl-imx8mp.c
> @@ -12,11 +12,13 @@
> #include "system/address-spaces.h"
> #include "hw/arm/bsa.h"
> #include "hw/arm/fsl-imx8mp.h"
> -#include "hw/intc/arm_gicv3.h"
> #include "hw/misc/unimp.h"
> #include "hw/boards.h"
> +#include "system/kvm.h"
> #include "system/system.h"
> +#include "target/arm/cpu.h"
> #include "target/arm/cpu-qom.h"
> +#include "target/arm/kvm_arm.h"
> #include "qapi/error.h"
> #include "qobject/qlist.h"
>
> @@ -193,15 +195,15 @@ static void fsl_imx8mp_init(Object *obj)
> {
> MachineState *ms = MACHINE(qdev_get_machine());
> FslImx8mpState *s = FSL_IMX8MP(obj);
> + const char *cpu_type = ms->cpu_type ?: ARM_CPU_TYPE_NAME("cortex-a53");
> int i;
>
> for (i = 0; i < MIN(ms->smp.cpus, FSL_IMX8MP_NUM_CPUS); i++) {
> g_autofree char *name = g_strdup_printf("cpu%d", i);
> - object_initialize_child(obj, name, &s->cpu[i],
> - ARM_CPU_TYPE_NAME("cortex-a53"));
> + object_initialize_child(obj, name, &s->cpu[i], cpu_type);
> }
>
> - object_initialize_child(obj, "gic", &s->gic, TYPE_ARM_GICV3);
> + object_initialize_child(obj, "gic", &s->gic, gicv3_class_name());
Running current master (resp. with this patch applied), I'm getting make
check failures on an aarch64 (Mt. Snow) host ("qemu-system-aarch64:
unknown type 'arm-gicv3'" while using this machine); going back right
before this patch, everything works fine. Haven't tried to debug this
yet (maybe I'm the one with the weird config again...)
>
> object_initialize_child(obj, "ccm", &s->ccm, TYPE_IMX8MP_CCM);
>
> @@ -274,7 +276,8 @@ static void fsl_imx8mp_realize(DeviceState *dev, Error
> **errp)
> /* CPUs */
> for (i = 0; i < ms->smp.cpus; i++) {
> /* On uniprocessor, the CBAR is set to 0 */
> - if (ms->smp.cpus > 1) {
> + if (ms->smp.cpus > 1 &&
> + object_property_find(OBJECT(&s->cpu[i]), "reset-cbar")) {
> object_property_set_int(OBJECT(&s->cpu[i]), "reset-cbar",
>
> fsl_imx8mp_memmap[FSL_IMX8MP_GIC_DIST].addr,
> &error_abort);
> @@ -286,6 +289,16 @@ static void fsl_imx8mp_realize(DeviceState *dev, Error
> **errp)
> object_property_set_int(OBJECT(&s->cpu[i]), "cntfrq", 8000000,
> &error_abort);
>
> + if (object_property_find(OBJECT(&s->cpu[i]), "has_el2")) {
> + object_property_set_bool(OBJECT(&s->cpu[i]), "has_el2",
> + !kvm_enabled(), &error_abort);
> + }
> +
> + if (object_property_find(OBJECT(&s->cpu[i]), "has_el3")) {
> + object_property_set_bool(OBJECT(&s->cpu[i]), "has_el3",
> + !kvm_enabled(), &error_abort);
> + }
> +
> if (i) {
> /*
> * Secondary CPUs start in powered-down state (and can be
> @@ -304,6 +317,7 @@ static void fsl_imx8mp_realize(DeviceState *dev, Error
> **errp)
> {
> SysBusDevice *gicsbd = SYS_BUS_DEVICE(&s->gic);
> QList *redist_region_count;
> + bool pmu = object_property_get_bool(OBJECT(first_cpu), "pmu", NULL);
>
> qdev_prop_set_uint32(gicdev, "num-cpu", ms->smp.cpus);
> qdev_prop_set_uint32(gicdev, "num-irq",
> @@ -360,6 +374,16 @@ static void fsl_imx8mp_realize(DeviceState *dev, Error
> **errp)
> qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ));
> sysbus_connect_irq(gicsbd, i + 3 * ms->smp.cpus,
> qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ));
> +
> + if (kvm_enabled()) {
> + if (pmu) {
> + assert(arm_feature(&s->cpu[i].env, ARM_FEATURE_PMU));
> + if (kvm_irqchip_in_kernel()) {
> + kvm_arm_pmu_set_irq(&s->cpu[i], VIRTUAL_PMU_IRQ);
> + }
> + kvm_arm_pmu_init(&s->cpu[i]);
> + }
> + }
> }
> }
>
> diff --git a/hw/arm/imx8mp-evk.c b/hw/arm/imx8mp-evk.c
> index fc880a1d44..3ddcf1af5a 100644
> --- a/hw/arm/imx8mp-evk.c
> +++ b/hw/arm/imx8mp-evk.c
> @@ -13,6 +13,7 @@
> #include "hw/arm/machines-qom.h"
> #include "hw/boards.h"
> #include "hw/qdev-properties.h"
> +#include "system/kvm.h"
> #include "system/qtest.h"
> #include "qemu/error-report.h"
> #include "qapi/error.h"
> @@ -94,12 +95,22 @@ static void imx8mp_evk_init(MachineState *machine)
> }
> }
>
> +static const char *imx8mp_evk_get_default_cpu_type(const MachineState *ms)
> +{
> + if (kvm_enabled()) {
> + return ARM_CPU_TYPE_NAME("host");
> + }
> +
> + return ARM_CPU_TYPE_NAME("cortex-a53");
> +}
> +
> static void imx8mp_evk_machine_init(MachineClass *mc)
> {
> mc->desc = "NXP i.MX 8M Plus EVK Board";
> mc->init = imx8mp_evk_init;
> mc->max_cpus = FSL_IMX8MP_NUM_CPUS;
> mc->default_ram_id = "imx8mp-evk.ram";
> + mc->get_default_cpu_type = imx8mp_evk_get_default_cpu_type;
> }
>
> DEFINE_MACHINE_AARCH64("imx8mp-evk", imx8mp_evk_machine_init)
> diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
> index b44b85f436..0cdeb60f1f 100644
> --- a/hw/arm/Kconfig
> +++ b/hw/arm/Kconfig
> @@ -622,7 +622,8 @@ config FSL_IMX8MP
> config FSL_IMX8MP_EVK
> bool
> default y
> - depends on TCG && AARCH64
> + depends on AARCH64
> + depends on TCG || KVM
> select FSL_IMX8MP
>
> config ARM_SMMUV3
> --
> 2.51.2
