The SSP interrupts 128 - 138 were only used by the AST2700 A0 SoC.
Since the AST2700 A0 has been deprecated, these interrupt
definitions are no longer needed. This commit removes them to
clean up the codebase.

Signed-off-by: Jamin Lin <[email protected]>
---
 hw/arm/aspeed_ast27x0-tsp.c | 13 ++-------
 hw/intc/aspeed_intc.c       | 55 ++-----------------------------------
 2 files changed, 4 insertions(+), 64 deletions(-)

diff --git a/hw/arm/aspeed_ast27x0-tsp.c b/hw/arm/aspeed_ast27x0-tsp.c
index f40c70fea5..9c11c016ca 100644
--- a/hw/arm/aspeed_ast27x0-tsp.c
+++ b/hw/arm/aspeed_ast27x0-tsp.c
@@ -62,7 +62,7 @@ static const int aspeed_soc_ast27x0tsp_irqmap[] = {
 };
 
 /* TSPINT 164 */
-static const int ast2700_tsp132_tsp164_intcmap[] = {
+static const int ast2700_tsp164_intcmap[] = {
     [ASPEED_DEV_UART0]     = 7,
     [ASPEED_DEV_UART1]     = 8,
     [ASPEED_DEV_UART2]     = 9,
@@ -89,21 +89,12 @@ static struct nvic_intc_irq_info ast2700_tsp_intcmap[] = {
     {161, 1, 1, NULL},
     {162, 1, 2, NULL},
     {163, 1, 3, NULL},
-    {164, 1, 4, ast2700_tsp132_tsp164_intcmap},
+    {164, 1, 4, ast2700_tsp164_intcmap},
     {165, 1, 5, NULL},
     {166, 1, 6, NULL},
     {167, 1, 7, NULL},
     {168, 1, 8, NULL},
     {169, 1, 9, NULL},
-    {128, 0, 1, NULL},
-    {129, 0, 2, NULL},
-    {130, 0, 3, NULL},
-    {131, 0, 4, NULL},
-    {132, 0, 5, ast2700_tsp132_tsp164_intcmap},
-    {133, 0, 6, NULL},
-    {134, 0, 7, NULL},
-    {135, 0, 8, NULL},
-    {136, 0, 9, NULL},
 };
 
 static qemu_irq aspeed_soc_ast27x0tsp_get_irq(AspeedCoprocessorState *s,
diff --git a/hw/intc/aspeed_intc.c b/hw/intc/aspeed_intc.c
index 305458d6d4..1702cb87dc 100644
--- a/hw/intc/aspeed_intc.c
+++ b/hw/intc/aspeed_intc.c
@@ -69,28 +69,6 @@ REG32(SSPINT165_STATUS,     0x1D4)
 /*
  * TSP INTC Registers
  */
-REG32(TSPINT128_EN,             0x3000)
-REG32(TSPINT128_STATUS,         0x3004)
-REG32(TSPINT129_EN,             0x3100)
-REG32(TSPINT129_STATUS,         0x3104)
-REG32(TSPINT130_EN,             0x3200)
-REG32(TSPINT130_STATUS,         0x3204)
-REG32(TSPINT131_EN,             0x3300)
-REG32(TSPINT131_STATUS,         0x3304)
-REG32(TSPINT132_EN,             0x3400)
-REG32(TSPINT132_STATUS,         0x3404)
-REG32(TSPINT133_EN,             0x3500)
-REG32(TSPINT133_STATUS,         0x3504)
-REG32(TSPINT134_EN,             0x3600)
-REG32(TSPINT134_STATUS,         0x3604)
-REG32(TSPINT135_EN,             0x3700)
-REG32(TSPINT135_STATUS,         0x3704)
-REG32(TSPINT136_EN,             0x3800)
-REG32(TSPINT136_STATUS,         0x3804)
-REG32(TSPINT137_EN,             0x3900)
-REG32(TSPINT137_STATUS,         0x3904)
-REG32(TSPINT138_EN,             0x3A00)
-REG32(TSPINT138_STATUS,         0x3A04)
 REG32(TSPINT160_169_EN,         0x3B00)
 REG32(TSPINT160_169_STATUS,     0x3B04)
 
@@ -511,29 +489,9 @@ static void aspeed_tsp_intc_write(void *opaque, hwaddr 
offset, uint64_t data,
     trace_aspeed_intc_write(name, offset, size, data);
 
     switch (reg) {
-    case R_TSPINT128_EN:
-    case R_TSPINT129_EN:
-    case R_TSPINT130_EN:
-    case R_TSPINT131_EN:
-    case R_TSPINT132_EN:
-    case R_TSPINT133_EN:
-    case R_TSPINT134_EN:
-    case R_TSPINT135_EN:
-    case R_TSPINT136_EN:
     case R_TSPINT160_169_EN:
         aspeed_intc_enable_handler(s, offset, data);
         break;
-    case R_TSPINT128_STATUS:
-    case R_TSPINT129_STATUS:
-    case R_TSPINT130_STATUS:
-    case R_TSPINT131_STATUS:
-    case R_TSPINT132_STATUS:
-    case R_TSPINT133_STATUS:
-    case R_TSPINT134_STATUS:
-    case R_TSPINT135_STATUS:
-    case R_TSPINT136_STATUS:
-        aspeed_intc_status_handler(s, offset, data);
-        break;
     case R_TSPINT160_169_STATUS:
         aspeed_intc_status_handler_multi_outpins(s, offset, data);
         break;
@@ -929,15 +887,6 @@ static const TypeInfo aspeed_2700ssp_intcio_info = {
 
 static AspeedINTCIRQ aspeed_2700tsp_intc_irqs[ASPEED_INTC_MAX_INPINS] = {
     {0, 0, 10, R_TSPINT160_169_EN, R_TSPINT160_169_STATUS},
-    {1, 10, 1, R_TSPINT128_EN, R_TSPINT128_STATUS},
-    {2, 11, 1, R_TSPINT129_EN, R_TSPINT129_STATUS},
-    {3, 12, 1, R_TSPINT130_EN, R_TSPINT130_STATUS},
-    {4, 13, 1, R_TSPINT131_EN, R_TSPINT131_STATUS},
-    {5, 14, 1, R_TSPINT132_EN, R_TSPINT132_STATUS},
-    {6, 15, 1, R_TSPINT133_EN, R_TSPINT133_STATUS},
-    {7, 16, 1, R_TSPINT134_EN, R_TSPINT134_STATUS},
-    {8, 17, 1, R_TSPINT135_EN, R_TSPINT135_STATUS},
-    {9, 18, 1, R_TSPINT136_EN, R_TSPINT136_STATUS},
 };
 
 static void aspeed_2700tsp_intc_class_init(ObjectClass *klass, const void 
*data)
@@ -947,8 +896,8 @@ static void aspeed_2700tsp_intc_class_init(ObjectClass 
*klass, const void *data)
 
     dc->desc = "ASPEED 2700 TSP INTC Controller";
     aic->num_lines = 32;
-    aic->num_inpins = 10;
-    aic->num_outpins = 19;
+    aic->num_inpins = 1;
+    aic->num_outpins = 10;
     aic->mem_size = 0x4000;
     aic->nr_regs = 0x3B08 >> 2;
     aic->reg_offset = 0;
-- 
2.43.0


Reply via email to