On Thu, 22 Jan 2026 10:52:14 +0000 Jonathan Cameron via qemu development <[email protected]> wrote:
> On Wed, 21 Jan 2026 16:45:58 +0100 > Mauro Carvalho Chehab <[email protected]> wrote: > > > On Wed, Jan 21, 2026 at 12:26:04PM +0000, Jonathan Cameron wrote: > > > On Wed, 21 Jan 2026 12:25:10 +0100 > > > Mauro Carvalho Chehab <[email protected]> wrote: > > > > > > > The UEFI 2.11 - N.2.14. CXL Component Events Section states that > > > > XL events are described at CXL specification 3.2: > > > CXL > > > > > > > 8.2.10.2.1 Event Records > > > > > > > > Add the GUIDs defined here to fuzzy logic error injection code. > > > > > > +CC linux-cxl as more folk there who will be familiar with this > > > stuff. > > > > > > Some of these won't be seen on a host. The same event > > > infrastructure is used for reporting on out of band interfaces > > > and some in band ones, but not ones that will turn up on the > > > mailboxes that firmware will be using to get info. > > > > Good to know, but UEFI 2.11 still mentions all of them as > > possible GUIDs: > > > > > > https://uefi.org/specs/UEFI/2.11/Apx_N_Common_Platform_Error_Record.html#cxl-component-events-section > > > > So, the UEFI 2.11 doesn't explicitly state they won't de delivered > > to OSPM. Quite contrary, they're listed as valid values for CPER, > > even if, in practice, they won't. > > > > This is just a small set of variables, that won't bring any major > > impact on the code. So, I prefer to keep them in sync with the spec. > > If they end removing the unused ones, we can update it in the future. > > > > If you want, I can add a note at the next version with your > > comments about them. > > > A note works for me. > > As I understand it CPER records are getting adopted in other specs > so it may make sense to document them, even if they aren't a possibility > via ACPI. > > However I'm not seeing them in the spec link you point at. > All I'm seeing is a cross reference the CXL spec Events Record Format. Heh, true, I got confused with another field. Yet, at CXL spec 3.2, it is said that: 8.2.10.2 Events =============== This section defines the standard event record format that all CXL devices shall use when reporting events to the host. ... Table 8-55. Common Event Record Format (Sheet 1 of 2) ------ -------- ---------------------------------------------------------------------------- Byte Length Description Offset in Bytes ------ -------- ---------------------------------------------------------------------------- 00h 10h Event Record Identifier: UUID representing the specific Event Record format. The following UUIDs are defined in this spec: • fbcd0a77-c260-417f-85a9-088b1621eba6 – General Media Event Record (see Table 8-57) • 601dcbb3-9c06-4eab-b8af-4e9bfb5c9624 – DRAM Event Record (see Table 8-58) • fe927475-dd59-4339-a586-79bab113b774 – Memory Module Event Record (see Table 8-59) • e71f3a40-2d29-4092-8a39-4d1c966c7c65 - Memory Sparing Event Record (see Table 8-60) • 77cf9271-9c02-470b-9fe4-bc7b75f2da97 – Physical Switch Event Record (see Table 7-77) • 40d26425-3396-4c4d-a5da-3d47263af425 – Virtual Switch Event Record (see Table 7-78) • 8dc44363-0c96-4710-b7bf-04bb99534c3f – MLD Port Event Record (see Table 7-79) • ca95afa7-f183-4018-8c2f-95268e101a2a - Dynamic Capacity Event Record (see Table 8-62) ------ -------- ---------------------------------------------------------------------------- ... So, CXL specs say they'll arrive at the host, and UEFI doesn't tell they can't arrive the OSPM. In any case, it is easier to just pick the entire set with 8 GUIDs and keep the scripts in sync with the specs than filtering what shouldn't belong there and why, with the risk of eventually miss something. I'll append the diff below to the relevant patches on this patchset. Regards, Mauro --- diff --git a/scripts/ghes_decode.py b/scripts/ghes_decode.py index 6c7fdfe84e3a..7bac7dbd6b3a 100644 --- a/scripts/ghes_decode.py +++ b/scripts/ghes_decode.py @@ -935,6 +935,10 @@ class DecodeCXLCompEvent(): """ # GUIDs, as defined at CXL specification 3.2: 8.2.10.2.1 Event Records + # on Table 8-55. Common Event Record Format + # + # Please notice that, in practice, not all those events will be passed + # to OSPM. Some may be handled internally. guids = [ ("General Media", "fbcd0a77-c260-417f-85a9-088b1621eba6"), ("DRAM", "601dcbb3-9c06-4eab-b8af-4e9bfb5c9624"), diff --git a/scripts/qmp_helper.py b/scripts/qmp_helper.py index 32baca17ce10..583f898f04ef 100755 --- a/scripts/qmp_helper.py +++ b/scripts/qmp_helper.py @@ -778,10 +778,14 @@ class cper_guid: [0xA6, 0xA6, 0x88, 0xB7, 0x28, 0xCF, 0x75, 0xD7]) + # CXL GUIDs, as defined at CXL specification 3.2: 8.2.10.2.1 Event Records + # on Table 8-55. Common Event Record Format + # + # Please notice that, in practice, not all those events will be passed + # to OSPM. Some may be consumed internally CPER_CXL_PROT_ERR = guid(0x80B9EFB4, 0x52B5, 0x4DE3, [0xA7, 0x77, 0x68, 0x78, 0x4B, 0x77, 0x10, 0x48]) - CPER_CXL_EVT_GEN_MEDIA = guid(0xFBCD0A77, 0xC260, 0x417F, [0x85, 0xA9, 0x08, 0x8B, 0x16, 0x21, 0xEB, 0xA6])
