Hello Alexander,
Could you please cc: me on the whole series ? I'd like to see
what the rest is about. However, I am not the sensor maintainer,
Titus is.
On 5/5/26 17:42, Alexander Hansen wrote:
Initial patch based on [1] to support yosemite v4 bmc emulation.
The goal of this machine support is to support OpenBMC development.
Reference linux devicetree from openbmc linux is [2].
Status:
- Enclosure FRU: showing up
- Management Board FRU: showing up
- Blade Board FRU: showing up
- Blade Board sensors: not implemented
- Blade Chassis FRU: showing up
- Fan Board FRU: both showing up
- Fan Board sensors: supported
Overall the emulation is incomplete but already helpful in development
and testing.
The focus of this initial support is on the FRU eeproms and fanboard
sensors.
Tested: booted an OpenBMC image for yosemite4 target.
Tested: functional test (see [5] for the image) passed.
```
Please remove the markdown annotations. This is a git commit log.
export QEMU_TEST_QEMU_BINARY=qemu-system-arm
./build/run tests/functional/arm/test_aspeed_fby4.py
TAP version 13
ok 1
test_aspeed_fby4.YosemiteV4Machine.test_arm_ast2600_yosemitev4_openbmc
1..1
```
References:
[1]
https://github.com/9elements/qemu/commit/32139f913c2bd0ebe4bd26c46765861f6f9f2d49
[2] arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
[3] https://github.com/legoater/qemu-aspeed-boot/pull/5
Cc: "Cédric Le Goater" <[email protected]> (maintainer:ASPEED BMCs)
Cc: Peter Maydell <[email protected]> (maintainer:ASPEED BMCs)
Cc: Steven Lee <[email protected]> (reviewer:ASPEED BMCs)
Cc: Troy Lee <[email protected]> (reviewer:ASPEED BMCs)
Cc: Jamin Lin <[email protected]> (reviewer:ASPEED BMCs)
Cc: Kane Chen <[email protected]> (reviewer:ASPEED BMCs)
Cc: Andrew Jeffery <[email protected]> (reviewer:ASPEED BMCs)
Cc: Joel Stanley <[email protected]> (reviewer:ASPEED BMCs)
Cc: [email protected] (open list:ASPEED BMCs)
Cc: [email protected] (open list:All patches CC here)
Signed-off-by: Alexander Hansen <[email protected]>
---
hw/arm/aspeed_ast2600_fby4.c | 289 +++++++++++++++++++++++
hw/arm/meson.build | 1 +
tests/functional/arm/meson.build | 2 +
tests/functional/arm/test_aspeed_fby4.py | 44 ++++
I would prefer the functional test to be proposed in its own patch.
The machine looks good. Just a few minor comments.
4 files changed, 336 insertions(+)
create mode 100644 hw/arm/aspeed_ast2600_fby4.c
create mode 100755 tests/functional/arm/test_aspeed_fby4.py
diff --git a/hw/arm/aspeed_ast2600_fby4.c b/hw/arm/aspeed_ast2600_fby4.c
new file mode 100644
index 0000000000..284f64e3f3
--- /dev/null
+++ b/hw/arm/aspeed_ast2600_fby4.c
@@ -0,0 +1,289 @@
+/*
+ * Yosemite V4
+ *
+ * Copyright 2026 9elements.
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "hw/arm/machines-qom.h"
+#include "hw/arm/aspeed.h"
+#include "hw/arm/aspeed_soc.h"
+#include "hw/nvram/eeprom_at24c.h"
+#include "hw/sensor/tmp105.h"
+#include "hw/sensor/max31790.h"
+#include "hw/sensor/max11615.h"
+#include "hw/sensor/adc128d818.h"
+#include "hw/i2c/i2c_mux_pca954x.h"
+#include "hw/gpio/pca9552.h"
+#include "system/reset.h"
I don't think this include is needed.
+
+#define FBY4_BMC_RAM_SIZE ASPEED_RAM_SIZE(2 * GiB)
+
+/* START OF EEPROM CONTENTS */
+
+/*
+ *./frugen -s board.mfg="Wiwynn" \
+ * --set board.pname="Fan Board FSC-MAX ADC-TI LED-NXP EFUSE-MAX" \
+ * --set text:board.pn="BRD-PN-345" \
+ * --board-date "10/1/2017 12:58:00" \
+ * --set board.serial="123456" \
+ * --set product.pname="Yosemite V4" \
+ * --set product.mfg="Wiwynn" \
+ * --set product.ver="v1.1" \
+ * --set product.serial="123456" \
+ * --set product.atag="PLACEHOLDER" \
+ * --set product.custom="Fanboard Custom1" \
+ * --set product.custom.1="Fanboard Custom2" \
+ * --set text:product.pn="PN-345" \
+ * fru-yv4-fanboard.bin
+ */
+/* EM Config:
yosemite4_fanboard_fsc_max_adc_ti_led_nxp_ons_efuse_max.json */
+/* Yosemite4 fan board */
+static const uint8_t fru_yv4_fanboard_bin[] = {
+ 0x01, 0x00, 0x00, 0x01, 0x0b, 0x00, 0x00, 0xf3, 0x01, 0x0a, 0x19,
0xce,
+ 0xc2, 0xa8, 0xc6, 0x57, 0x69, 0x77, 0x79, 0x6e, 0x6e, 0xea, 0x46,
0x61,
+ 0x6e, 0x20, 0x42, 0x6f, 0x61, 0x72, 0x64, 0x20, 0x46, 0x53, 0x43,
0x2d,
+ 0x4d, 0x41, 0x58, 0x20, 0x41, 0x44, 0x43, 0x2d, 0x54, 0x49, 0x20,
0x4c,
+ 0x45, 0x44, 0x2d, 0x4e, 0x58, 0x50, 0x20, 0x45, 0x46, 0x55, 0x53,
0x45,
+ 0x2d, 0x4d, 0x41, 0x58, 0x85, 0x91, 0x34, 0x51, 0x95, 0x05, 0xca,
0x42,
+ 0x52, 0x44, 0x2d, 0x50, 0x4e, 0x2d, 0x33, 0x34, 0x35, 0xc0, 0xc1,
0x00,
+ 0x00, 0x00, 0x00, 0xdb, 0x01, 0x09, 0x19, 0xc6, 0x57, 0x69, 0x77,
0x79,
+ 0x6e, 0x6e, 0xcb, 0x59, 0x6f, 0x73, 0x65, 0x6d, 0x69, 0x74, 0x65,
0x20,
+ 0x56, 0x34, 0xc6, 0x50, 0x4e, 0x2d, 0x33, 0x34, 0x35, 0xc4, 0x76,
0x31,
+ 0x2e, 0x31, 0x85, 0x91, 0x34, 0x51, 0x95, 0x05, 0x89, 0x30, 0x1b,
0x8e,
+ 0x25, 0xfa, 0xb2, 0x64, 0x29, 0x03, 0xc0, 0xd0, 0x46, 0x61, 0x6e,
0x62,
+ 0x6f, 0x61, 0x72, 0x64, 0x20, 0x43, 0x75, 0x73, 0x74, 0x6f, 0x6d,
0x32,
+ 0xc1, 0x00, 0x00, 0x9d
+};
+static const size_t fru_yv4_fanboard_bin_len =
sizeof(fru_yv4_fanboard_bin);
+
+/*
+ *./frugen -s board.mfg="Wiwynn" \
+ * --set board.pname="Sentinel Dome without Retimer" \
+ * --set text:board.pn="BRD-PN-345" \
+ * --board-date "10/1/2017 12:58:00" \
+ * --set board.serial="123456" \
+ * --set product.pname="Yosemite V4" \
+ * --set product.mfg="Wiwynn" \
+ * --set product.ver="v1.1" \
+ * --set product.serial="123456" \
+ * --set product.atag="PLACEHOLDER" \
+ * --set product.custom="Yosemite V4 T1" \
+ * --set product.custom.1="Yosemite V4 T1" \
+ * --set text:product.pn="PN-345" \
+ * fru-yv4-sentineldome-board.bin
+ */
+/* product.cust maps to PRODUCT_INFO_AM2 */
+/* EM Config: yosemite4_sentineldome_t1.json */
+/* Yosemite4 Sentinel Dome without Retimer Boards */
+static const uint8_t fru_yv4_sentineldome_board_bin[] = {
+ 0x01, 0x00, 0x00, 0x01, 0x09, 0x00, 0x00, 0xf5, 0x01, 0x08, 0x19,
0xce,
+ 0xc2, 0xa8, 0xc6, 0x57, 0x69, 0x77, 0x79, 0x6e, 0x6e, 0xdd, 0x53,
0x65,
+ 0x6e, 0x74, 0x69, 0x6e, 0x65, 0x6c, 0x20, 0x44, 0x6f, 0x6d, 0x65,
0x20,
+ 0x77, 0x69, 0x74, 0x68, 0x6f, 0x75, 0x74, 0x20, 0x52, 0x65, 0x74,
0x69,
+ 0x6d, 0x65, 0x72, 0x85, 0x91, 0x34, 0x51, 0x95, 0x05, 0xca, 0x42,
0x52,
+ 0x44, 0x2d, 0x50, 0x4e, 0x2d, 0x33, 0x34, 0x35, 0xc0, 0xc1, 0x00,
0x78,
+ 0x01, 0x09, 0x19, 0xc6, 0x57, 0x69, 0x77, 0x79, 0x6e, 0x6e, 0xcb,
0x59,
+ 0x6f, 0x73, 0x65, 0x6d, 0x69, 0x74, 0x65, 0x20, 0x56, 0x34, 0xc6,
0x50,
+ 0x4e, 0x2d, 0x33, 0x34, 0x35, 0xc4, 0x76, 0x31, 0x2e, 0x31, 0x85,
0x91,
+ 0x34, 0x51, 0x95, 0x05, 0x89, 0x30, 0x1b, 0x8e, 0x25, 0xfa, 0xb2,
0x64,
+ 0x29, 0x03, 0xc0, 0xce, 0x59, 0x6f, 0x73, 0x65, 0x6d, 0x69, 0x74,
0x65,
+ 0x20, 0x56, 0x34, 0x20, 0x54, 0x31, 0xc1, 0x00, 0x00, 0x00, 0x00,
0xeb
+};
+static const size_t fru_yv4_sentineldome_board_bin_len =
+ sizeof(fru_yv4_sentineldome_board_bin);
+
+/*
+ *./frugen -s board.mfg="Wiwynn" \
+ * --set board.pname="Sentinel Dome" \
+ * --set text:board.pn="BRD-PN-345" \
+ * --board-date "10/1/2017 12:58:00" \
+ * --set board.serial="123456" \
+ * --set product.pname="Yosemite V4" \
+ * --set product.mfg="Wiwynn" \
+ * --set product.ver="v1.1" \
+ * --set product.serial="123456" \
+ * --set product.atag="PLACEHOLDER" \
+ * --set text:product.pn="PN-345" \
+ * fru-yv4-sentineldome-chassis.bin
+ */
+/* EM Config: yosemite4_sentineldome_chassis.json */
+/* Yosemite 4 Sentinel Dome Chassis FRU */
+static const uint8_t fru_yv4_sentineldome_chassis_bin[] = {
+ 0x01, 0x00, 0x00, 0x01, 0x07, 0x00, 0x00, 0xf7, 0x01, 0x06, 0x19,
0xce,
+ 0xc2, 0xa8, 0xc6, 0x57, 0x69, 0x77, 0x79, 0x6e, 0x6e, 0xcd, 0x53,
0x65,
+ 0x6e, 0x74, 0x69, 0x6e, 0x65, 0x6c, 0x20, 0x44, 0x6f, 0x6d, 0x65,
0x85,
+ 0x91, 0x34, 0x51, 0x95, 0x05, 0xca, 0x42, 0x52, 0x44, 0x2d, 0x50,
0x4e,
+ 0x2d, 0x33, 0x34, 0x35, 0xc0, 0xc1, 0x00, 0xb6, 0x01, 0x07, 0x19,
0xc6,
+ 0x57, 0x69, 0x77, 0x79, 0x6e, 0x6e, 0xcb, 0x59, 0x6f, 0x73, 0x65,
0x6d,
+ 0x69, 0x74, 0x65, 0x20, 0x56, 0x34, 0xc6, 0x50, 0x4e, 0x2d, 0x33,
0x34,
+ 0x35, 0xc4, 0x76, 0x31, 0x2e, 0x31, 0x85, 0x91, 0x34, 0x51, 0x95,
0x05,
+ 0x89, 0x30, 0x1b, 0x8e, 0x25, 0xfa, 0xb2, 0x64, 0x29, 0x03, 0xc0,
0xc1,
+ 0x00, 0x00, 0x00, 0x59
+};
+static const size_t fru_yv4_sentineldome_chassis_bin_len =
+ sizeof(fru_yv4_sentineldome_chassis_bin);
+
+/*
+ *./frugen -s board.mfg="Wiwynn" \
+ * --set board.pname="Management Board wBMC" \
+ * --set text:board.pn="BRD-PN-345" \
+ * --board-date "10/1/2017 12:58:00" \
+ * --set board.serial="123456" \
+ * --set product.pname="Yosemite V4" \
+ * --set product.mfg="Wiwynn" \
+ * --set product.ver="v1.1" \
+ * --set product.serial="123456" \
+ * --set product.atag="PLACEHOLDER" \
+ * --set text:product.pn="PN-345" \
+ * fru-yv4-eclosure.bin
+ */
+/* EM Config: yosemite4_chassis.json, yosemite4.json */
+/* Yosemite 4 Sentinel Dome Enclosure FRU */
+static const uint8_t fru_yv4_eclosure_bin[] = {
+ 0x01, 0x00, 0x00, 0x01, 0x08, 0x00, 0x00, 0xf6, 0x01, 0x07, 0x19,
0xce,
+ 0xc2, 0xa8, 0xc6, 0x57, 0x69, 0x77, 0x79, 0x6e, 0x6e, 0xd5, 0x4d,
0x61,
+ 0x6e, 0x61, 0x67, 0x65, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x42, 0x6f,
0x61,
+ 0x72, 0x64, 0x20, 0x77, 0x42, 0x4d, 0x43, 0x85, 0x91, 0x34, 0x51,
0x95,
+ 0x05, 0xca, 0x42, 0x52, 0x44, 0x2d, 0x50, 0x4e, 0x2d, 0x33, 0x34,
0x35,
+ 0xc0, 0xc1, 0x00, 0x26, 0x01, 0x07, 0x19, 0xc6, 0x57, 0x69, 0x77,
0x79,
+ 0x6e, 0x6e, 0xcb, 0x59, 0x6f, 0x73, 0x65, 0x6d, 0x69, 0x74, 0x65,
0x20,
+ 0x56, 0x34, 0xc6, 0x50, 0x4e, 0x2d, 0x33, 0x34, 0x35, 0xc4, 0x76,
0x31,
+ 0x2e, 0x31, 0x85, 0x91, 0x34, 0x51, 0x95, 0x05, 0x89, 0x30, 0x1b,
0x8e,
+ 0x25, 0xfa, 0xb2, 0x64, 0x29, 0x03, 0xc0, 0xc1, 0x00, 0x00, 0x00,
0x59
+};
+static const size_t fru_yv4_eclosure_bin_len =
sizeof(fru_yv4_eclosure_bin);
+
+/* END OF EEPROM CONTENTS */
+
+static void fby4_i2c_init_fanboard(I2CSlave *fan_mux, size_t
eepromSize)
+{
+ /* 2 fan boards */
+ for (int i = 0; i <= 1; i++) {
+ /* downstream bus */
+ I2CBus *bus = pca954x_i2c_get_bus(fan_mux, i);
+
+ /* ti,adc128d818 @ 0x1f (adc) */
+ /* the driver will throw away the last 4 bits, set them 0 */
+ static const uint16_t adc_values1[8] = {
+ 0b011110000000, 0b010100010000,
+ 0b001000110000, 0b100000100000,
+ 0b011110000000, 0b010100010000,
+ 0b001000110000, 0b100000100000};
+ adc128d818_init_with_values(bus, 0x1f, adc_values1, 8);
+
+ /* maxim,max31790 @ 0x20 (pwm) */
+ i2c_slave_create_simple(bus, TYPE_MAX31790, 0x20);
+
+ /*
+ * ti,tca6424 @ 0x22 (gpio)
+ * linux handles tca6424 with PCA953X_TYPE, same as pca9535
+ * { "pca9535", 16 | PCA953X_TYPE | PCA_INT, },
+ * { "tca6424", 24 | PCA953X_TYPE | PCA_INT, },
+ * so we _could_ be fine here unless more than 16 gpios are
used
+ */
+ i2c_slave_create_simple(bus, TYPE_PCA9535, 0x22);
+
+ /*
+ * NOTE: above works and could use for gpio presence:
+ * $ gpioget gpiochip2 2
+ * 1
+ */
+
+ /* maxim,max31790 @ 0x2f (pwm) */
+ i2c_slave_create_simple(bus, TYPE_MAX31790, 0x2f);
+
+ /* maxim,max11615 @ 0x33 (adc) */
+ static const uint16_t adc_values[8] = {
+ 0b011110000010, 0b010100011000,
+ 0b001000110100, 0b100000101001,
+ 0b011110000010, 0b010100011000,
+ 0b001000110100, 0b100000101001};
+ max11615_init_with_values(bus, 0x33, adc_values, 8);
+
+ at24c_eeprom_init_rom(
+ bus, 0x52, eepromSize,
+ fru_yv4_fanboard_bin,
+ fru_yv4_fanboard_bin_len);
+
+ /* LED blink driver / gpio expander */
+ /* nxp,pca9552 @ 0x61 (gpio) */
+ i2c_slave_create_simple(bus, TYPE_PCA9552, 0x61);
+ }
+}
+
+static void fby4_i2c_init_blade_chassis(I2CBus *bus, size_t eepromSize)
+{
+ /* Sentinel Dome Blade EEPROMS */
+
+ /* Board */
+ at24c_eeprom_init_rom(bus, 0x54, eepromSize,
+ fru_yv4_sentineldome_board_bin,
fru_yv4_sentineldome_board_bin_len);
+
+ /* Chassis */
+ at24c_eeprom_init_rom(bus, 0x55, eepromSize,
+ fru_yv4_sentineldome_chassis_bin,
fru_yv4_sentineldome_chassis_bin_len);
+}
+
+static void fby4_i2c_init_multiple_blade_chassis(I2CBus **i2c,
+ size_t eepromSize)
+{
+ /* there is 8 blade chassis, but we only emulate 2 for
performance reason */
+ for (int bus = 1; bus <= (8 / 4); bus++) {
+
Extra line.
+ fby4_i2c_init_blade_chassis(i2c[bus], eepromSize);
+ }
+}
+
+static void fby4_i2c_init(AspeedMachineState *bmc)
+{
+ AspeedSoCState *soc = bmc->soc;
+ I2CBus *i2c[16];
+
+ for (int i = 0; i < 16; i++) {
+ i2c[i] = aspeed_i2c_get_bus(&soc->i2c, i);
+ }
+
+ const size_t eepromSize = 128 * KiB;
+
+ const uint8_t enclosure_addr = 0x51;
These variables seem superflous.
+
+ /* Enclosure (EM Config: yosemite4_chassis.json, yosemite4.json) */
+ at24c_eeprom_init_rom(i2c[1], enclosure_addr, eepromSize,
+ fru_yv4_eclosure_bin, fru_yv4_eclosure_bin_len);
+
+ fby4_i2c_init_multiple_blade_chassis(i2c, eepromSize);
+
+ /* Yv4 fanboard connection */
+ I2CSlave *fan_mux = i2c_slave_create_simple(i2c[14],
TYPE_PCA9546, 0x74);
+
+ fby4_i2c_init_fanboard(fan_mux, eepromSize);
+}
+
+static void aspeed_machine_fby4_class_init(ObjectClass *oc, const
void *data)
+{
+ MachineClass *mc = MACHINE_CLASS(oc);
+ AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
+
+ mc->desc = "Facebook fby4 BMC (Cortex-A7)";
+ amc->fmc_model = "mx66l1g45g";
+ amc->num_cs = 2;
+ amc->macs_mask = ASPEED_MAC3_ON;
+ amc->i2c_init = fby4_i2c_init;
+ mc->default_ram_size = FBY4_BMC_RAM_SIZE;
+ aspeed_machine_class_init_cpus_defaults(mc);
+}
+
+static const TypeInfo aspeed_ast2600_fby4_types[] = {
+ {
+ .name = MACHINE_TYPE_NAME("fby4-bmc"),
+ .parent = MACHINE_TYPE_NAME("ast2600-evb"),
+ .class_init = aspeed_machine_fby4_class_init,
+ .interfaces = arm_machine_interfaces,
+ }
+};
+
+DEFINE_TYPES(aspeed_ast2600_fby4_types)
diff --git a/hw/arm/meson.build b/hw/arm/meson.build
index 84b8ec5fb5..ccbc23e549 100644
--- a/hw/arm/meson.build
+++ b/hw/arm/meson.build
@@ -60,6 +60,7 @@ arm_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files(
'aspeed_ast2600_catalina.c',
'aspeed_ast2600_evb.c',
'aspeed_ast2600_fby35.c',
+ 'aspeed_ast2600_fby4.c',
'aspeed_ast2600_fuji.c',
'aspeed_ast2600_gb200nvl.c',
'aspeed_ast2600_qcom-dc-scm-v1.c',
diff --git a/tests/functional/arm/meson.build
b/tests/functional/arm/meson.build
index 2f538f29a2..10c0006f22 100644
--- a/tests/functional/arm/meson.build
+++ b/tests/functional/arm/meson.build
@@ -14,6 +14,7 @@ test_arm_timeouts = {
'aspeed_ast2600_sdk_otp' : 720,
'aspeed_bletchley' : 480,
'aspeed_catalina' : 480,
+ 'aspeed_fby4': 480,
'aspeed_gb200nvl_bmc' : 480,
'aspeed_rainier' : 480,
'bpim2u' : 500,
@@ -47,6 +48,7 @@ tests_arm_system_thorough = [
'aspeed_ast2600_sdk_otp',
'aspeed_bletchley',
'aspeed_catalina',
+ 'aspeed_fby4',
'aspeed_gb200nvl_bmc',
'aspeed_rainier',
'bpim2u',
diff --git a/tests/functional/arm/test_aspeed_fby4.py
b/tests/functional/arm/test_aspeed_fby4.py
new file mode 100755
index 0000000000..9679e4a1c5
--- /dev/null
+++ b/tests/functional/arm/test_aspeed_fby4.py
@@ -0,0 +1,44 @@
+#!/usr/bin/env python3
+#
+# Functional test that boots the ASPEED machines
+#
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+from qemu_test import Asset
+from aspeed import AspeedTest
+
+
+class YosemiteV4Machine(AspeedTest):
+
+ ASSET_YOSEMITE_V4_FLASH = Asset(
+
'https://github.com/pointbazaar/qemu-aspeed-boot/raw/3ef9a0d8cd2902c2039924ad1f16c8f2345486f3/images/yosemite4-bmc/openbmc-20260505132843/obmc-phosphor-image-yosemite4-20260505132843.static.mtd.xz',
+ 'dff6946363b41f952b15cfc3156482b89fcfc1b0ecfc3ec8b3ed496a5f001ef9')
Now that the yosemite4 image is merged in my image test tree, may be
it is best to update the asset ? As you wish. Works like that too.
+
+ def do_test_arm_aspeed_openbmc_no_network(self, machine, image,
uboot,
+ cpu_id, soc):
+
+ self.set_machine(machine)
+ self.vm.set_console()
+ self.vm.add_args('-drive', f'file={image},if=mtd,format=raw',
+ '-snapshot')
+ self.vm.launch()
+
+ self.wait_for_console_pattern(f'U-Boot {uboot}')
+ self.wait_for_console_pattern('## Loading kernel from FIT
Image')
+ self.wait_for_console_pattern('Starting kernel ...')
+ self.wait_for_console_pattern(f'Booting Linux on physical
CPU {cpu_id}')
+ self.wait_for_console_pattern(f'ASPEED {soc}')
+ self.wait_for_console_pattern('/init as init process')
+ # yosemite v4 does not emit the hostname log which is
+ # different from the other machines.
+ self.wait_for_console_pattern('yosemite4 login:')
+
+ def test_arm_ast2600_yosemitev4_openbmc(self):
+ image_path = self.uncompress(self.ASSET_YOSEMITE_V4_FLASH)
+
+ self.do_test_arm_aspeed_openbmc_no_network('fby4-bmc',
image=image_path,
+ uboot='2019.04',
cpu_id='0xf00',
+ soc='AST2600 rev A3')
I don't see any tests regarding the new sensor models.
The commit logs of patch 1-3 :
hw/sensor: MAX31790 support
hw/sensor: support MAX11615
hw/sensor: support Texas Instruments ADC128D818
contain Linux command sequences that could be included in this test
case. Could you do that please ?
Also, for sensors, please cc:
Titus Rwantare <[email protected]>
and we will need new entries under MAINTAINERS.
Thanks,
C.
