On 5/12/26 12:20, Alexander Hansen wrote:
Product: [1]
Datasheet: [2]
Sensor readings can be provided upon creation of the device. In case no
readings are provided the ADC reads a pre-defined arbitrary value.
root@yosemite4:~# cat /sys/bus/iio/devices/iio:device2/name
max11615
root@yosemite4:~# cat /sys/bus/iio/devices/iio:device2/in_voltage0_raw
1922
root@yosemite4:~# cat /sys/bus/iio/devices/iio:device2/in_voltage_scale
0.500000000
trace:
less /tmp/qemu-trace.log | grep -i max116
max11615_realize i2c_addr: 0x33
max11615_realize i2c_addr: 0x33
max11615_event i2c_addr: 0x33, event: 0x01
max11615_write_setup i2c_addr: 0x33, data: 0xd2
max11615_write_config i2c_addr: 0x33, data: 0x0f
max11615_event i2c_addr: 0x33, event: 0x03
max11615_event i2c_addr: 0x33, event: 0x01
max11615_write_setup i2c_addr: 0x33, data: 0xd2
max11615_write_config i2c_addr: 0x33, data: 0x0f
max11615_event i2c_addr: 0x33, event: 0x03
max11615_event i2c_addr: 0x33, event: 0x01
max11615_write_setup i2c_addr: 0x33, data: 0xd2
max11615_write_config i2c_addr: 0x33, data: 0x61
max11615_event i2c_addr: 0x33, event: 0x03
max11615_event i2c_addr: 0x33, event: 0x00
max11615_recv i2c_addr: 0x33, reg_addr: 0x00
max11615_recv_return i2c_addr: 0x33, returns: 0xfa
max11615_recv i2c_addr: 0x33, reg_addr: 0x00
max11615_recv_return i2c_addr: 0x33, returns: 0xd2
max11615_event i2c_addr: 0x33, event: 0x04
max11615_event i2c_addr: 0x33, event: 0x03
References:
[1] https://www.analog.com/en/products/MAX11615.html
[2]
https://www.analog.com/media/en/technical-documentation/data-sheets/MAX11612-MAX11617.pdf
Cc: Titus Rwantare <[email protected]>
Cc: "Cédric Le Goater" <[email protected]> (maintainer:ASPEED BMCs)
Cc: "Philippe Mathieu-Daudé" <[email protected]> (odd fixer:Overall sensors)
Cc: Paolo Bonzini <[email protected]> (maintainer:Kconfig)
Cc: Peter Maydell <[email protected]> (supporter:ARM TCG CPUs)
Cc: [email protected] (open list:All patches CC here)
Cc: [email protected] (open list:ARM TCG CPUs)
Signed-off-by: Alexander Hansen <[email protected]>
---
MAINTAINERS | 1 +
hw/arm/Kconfig | 1 +
hw/arm/aspeed_ast2600_fby4.c | 8 +-
hw/sensor/Kconfig | 4 +
hw/sensor/max11615.c | 202 +++++++++++++++++++++++
hw/sensor/meson.build | 1 +
hw/sensor/trace-events | 8 +
include/hw/sensor/max11615.h | 20 +++
tests/functional/arm/test_aspeed_fby4.py | 8 +
9 files changed, 252 insertions(+), 1 deletion(-)
create mode 100644 hw/sensor/max11615.c
create mode 100644 include/hw/sensor/max11615.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 9c991f8e70..a9c88996a2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3981,6 +3981,7 @@ S: Maintained
F: hw/i2c/pmbus_device.c
F: hw/sensor/adm1272.c
F: hw/sensor/isl_pmbus_vr.c
+F: hw/sensor/max11615.c
F: hw/sensor/max31790.c
F: hw/sensor/max34451.c
F: include/hw/i2c/pmbus_device.h
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 99864eb878..76a7d327a9 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -553,6 +553,7 @@ config ASPEED_SOC
select PMBUS
select MAX31785
select MAX31790
+ select MAX11615
select FSI_APB2OPB_ASPEED
select AT24C
select PCI_EXPRESS
diff --git a/hw/arm/aspeed_ast2600_fby4.c b/hw/arm/aspeed_ast2600_fby4.c
index a7c2dc09ea..036f5b9e38 100644
--- a/hw/arm/aspeed_ast2600_fby4.c
+++ b/hw/arm/aspeed_ast2600_fby4.c
@@ -12,6 +12,7 @@
#include "hw/arm/aspeed_soc.h"
#include "hw/nvram/eeprom_at24c.h"
#include "hw/sensor/max31790.h"
+#include "hw/sensor/max11615.h"
#include "hw/i2c/i2c_mux_pca954x.h"
#include "hw/gpio/pca9552.h"
@@ -186,7 +187,12 @@ static void fby4_i2c_init_fanboard(I2CSlave *fan_mux, size_t eepromSize)
i2c_slave_create_simple(bus, TYPE_MAX31790, 0x2f);
/* maxim,max11615 @ 0x33 (adc) */
- /* TODO */
+ static const uint16_t adc_values[8] = {
+ 0b011110000010, 0b010100011000,
+ 0b001000110100, 0b100000101001,
+ 0b011110000010, 0b010100011000,
+ 0b001000110100, 0b100000101001};
+ max11615_init_with_values(bus, 0x33, adc_values, 8);
at24c_eeprom_init_rom(
bus, 0x52, eepromSize,
diff --git a/hw/sensor/Kconfig b/hw/sensor/Kconfig
index ece2f2b167..84eede9d84 100644
--- a/hw/sensor/Kconfig
+++ b/hw/sensor/Kconfig
@@ -47,3 +47,7 @@ config MAX31785
config MAX31790
bool
depends on PMBUS
+
+config MAX11615
+ bool
+ depends on I2C
diff --git a/hw/sensor/max11615.c b/hw/sensor/max11615.c
new file mode 100644
index 0000000000..7950e00e33
--- /dev/null
+++ b/hw/sensor/max11615.c
@@ -0,0 +1,202 @@
+/*
+ * Maxim MAX11615 Low-Power 12 bit ADC
+ * Models MAX11612,MAX11613,MAX11614,MAX11615,MAX11616,MAX11617
+ *
+ * Datasheet:
+ *
https://www.analog.com/media/en/technical-documentation/data-sheets/MAX11612-MAX11617.pdf
+ *
+ * Copyright 2026 9elements
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "hw/i2c/i2c.h"
+#include "migration/vmstate.h"
+#include "qapi/error.h"
+#include "qapi/visitor.h"
+#include "qemu/log.h"
+#include "qemu/module.h"
+#include "trace.h"
+#include "hw/sensor/max11615.h"
+
+#define MAX11615_NUM_CHANNELS 8
+
+struct MAX11615State {
+ I2CSlave i2c;
+
+ uint16_t channels[MAX11615_NUM_CHANNELS];
+
+ /* output buffer */
+ uint8_t outlen;
+ uint8_t outbuf[2];
+
+ /* selected channel for read/write operation */
+ uint8_t pointer;
+};
+
+struct MAX11615Class {
+ I2CSlaveClass parent_class;
+};
+
+OBJECT_DECLARE_TYPE(MAX11615State, MAX11615Class, MAX11615)
+
+static void max11615_read(MAX11615State *s)
+{
+ /* read an ADC channel, first 4 bits must be high */
+ uint8_t msb = s->channels[s->pointer] >> 8;
+ uint8_t lsb = s->channels[s->pointer] & 0xff;
+ s->outbuf[0] = 0b11110000 | (msb & 0b00001111);
+ s->outbuf[1] = lsb;
+}
+
+static void max11615_write_config_byte(MAX11615State *s, uint8_t data)
+{
+ trace_max11615_write_config(s->i2c.address, data);
+
+ uint8_t channelSelect = (data >> 1) & 0b1111;
channel_select
+
+ /* Table 3. Channel Selection (AIN0 ... AIN11) */
+ if (channelSelect > 11) {
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: invalid channel select", __func__);
+ channelSelect = 11;
+ }
+ s->pointer = channelSelect;
+}
+
+static void max11615_write_setup_byte(MAX11615State *s, uint8_t data)
+{
+ trace_max11615_write_setup(s->i2c.address, data);
+ /* we ignore the setup byte, not implemented */
+}
+
+static int max11615_send(I2CSlave *i2c, uint8_t data)
+{
+ MAX11615State *s = MAX11615(i2c);
+ const uint8_t msb = (data >> 7) & 0b1;
+
+ if (msb) {
+ max11615_write_setup_byte(s, data);
+ } else {
+ max11615_write_config_byte(s, data);
+ }
+
+ s->outlen = 0;
+ return 0;
+}
+
+static uint8_t max11615_recv(I2CSlave *i2c)
+{
+ MAX11615State *s = MAX11615(i2c);
+ trace_max11615_recv(s->i2c.address, s->pointer);
+
+ max11615_read(s);
+
+ if (s->outlen >= 2) {
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: too many bytes read", __func__);
+ s->outlen = 0;
+ }
+
+ const uint8_t data = s->outbuf[s->outlen++];
+
+ trace_max11615_recv_return(s->i2c.address, data);
+ return data;
+}
+
+static int max11615_event(I2CSlave *i2c, enum i2c_event event)
+{
+ MAX11615State *s = MAX11615(i2c);
+
+ trace_max11615_event(s->i2c.address, event);
+
+ switch (event) {
+ case I2C_START_RECV:
+ s->outlen = 0;
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static const VMStateDescription vmstate_max11615 = {
+ .name = TYPE_MAX11615,
+ .version_id = 0,
+ .minimum_version_id = 0,
+ .fields = (const VMStateField[]){
+ VMSTATE_UINT16_ARRAY(channels, MAX11615State, MAX11615_NUM_CHANNELS),
+ VMSTATE_UINT8(outlen, MAX11615State),
+ VMSTATE_UINT8_ARRAY(outbuf, MAX11615State, 2),
+ VMSTATE_UINT8(pointer, MAX11615State),
+ VMSTATE_I2C_SLAVE(i2c, MAX11615State),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static void max11615_init(Object *obj)
+{
+ /* Nothing to do */
+}
+
+I2CSlave *max11615_init_with_values(I2CBus *bus, uint8_t address,
+ const uint16_t *init_values, uint32_t init_values_size)
+{
+ MAX11615State *s;
+
+ s = MAX11615(i2c_slave_new(TYPE_MAX11615, address));
+
+ for (int i = 0; i < MAX11615_NUM_CHANNELS && i < init_values_size; i++) {
+
+ /* arbitrary value */
+ uint16_t value = 0b0000101011010010;
+
+ if (i < init_values_size) {
+ value = init_values[i];
+ }
+ s->channels[i] = value;
+ }
+
+ i2c_slave_realize_and_unref(I2C_SLAVE(s), bus, &error_abort);
+
+ return I2C_SLAVE(s);
+}
+
+static void max11615_realize(DeviceState *dev, Error **errp)
+{
+ MAX11615State *s = MAX11615(dev);
+
+ trace_max11615_realize(s->i2c.address);
+
+ s->pointer = 0;
+ s->outlen = 0;
+}
+
+static void max11615_class_init(ObjectClass *klass, const void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ I2CSlaveClass *k = I2C_SLAVE_CLASS(klass);
+
+ dc->realize = max11615_realize;
+ dc->desc = "Maxim MAX11615 12-bit ADC";
+ dc->vmsd = &vmstate_max11615;
+ k->event = max11615_event;
+ k->recv = max11615_recv;
+ k->send = max11615_send;
+}
+
+static const TypeInfo max31790_info = {
wrong name.
Thanks,
C.
+ .name = TYPE_MAX11615,
+ .parent = TYPE_I2C_SLAVE,
+ .instance_size = sizeof(MAX11615State),
+ .class_size = sizeof(MAX11615Class),
+ .instance_init = max11615_init,
+ .class_init = max11615_class_init,
+};
+
+static void max31790_register_types(void)
+{
+ type_register_static(&max31790_info);
+}
+
+type_init(max31790_register_types)
diff --git a/hw/sensor/meson.build b/hw/sensor/meson.build
index 4987c3b253..a1e26604fa 100644
--- a/hw/sensor/meson.build
+++ b/hw/sensor/meson.build
@@ -9,3 +9,4 @@ system_ss.add(when: 'CONFIG_LSM303DLHC_MAG', if_true:
files('lsm303dlhc_mag.c'))
system_ss.add(when: 'CONFIG_ISL_PMBUS_VR', if_true: files('isl_pmbus_vr.c'))
system_ss.add(when: 'CONFIG_MAX31785', if_true: files('max31785.c'))
system_ss.add(when: 'CONFIG_MAX31790', if_true: files('max31790.c'))
+system_ss.add(when: 'CONFIG_MAX11615', if_true: files('max11615.c'))
diff --git a/hw/sensor/trace-events b/hw/sensor/trace-events
index c15c0a7e93..3fed979e85 100644
--- a/hw/sensor/trace-events
+++ b/hw/sensor/trace-events
@@ -12,3 +12,11 @@ max31790_recv_return(uint8_t i2c_addr, uint8_t data)
"i2c_addr: 0x%02x, returns:
max31790_event(uint8_t i2c_addr, uint8_t event) "i2c_addr: 0x%02x, event:
0x%02x"
max31790_realize(uint8_t i2c_addr) "i2c_addr: 0x%02x"
max31790_pwm_write(uint8_t i2c_addr, size_t index, uint16_t value) "i2c_addr:
0x%02x, index: %zu, value: 0x%04x"
+
+# max11615.c
+max11615_write_setup(uint8_t i2c_addr, uint8_t send) "i2c_addr: 0x%02x, data:
0x%02x"
+max11615_write_config(uint8_t i2c_addr, uint8_t send) "i2c_addr: 0x%02x, data:
0x%02x"
+max11615_recv(uint8_t i2c_addr, uint8_t reg_addr) "i2c_addr: 0x%02x, reg_addr:
0x%02x"
+max11615_recv_return(uint8_t i2c_addr, uint8_t data) "i2c_addr: 0x%02x, returns:
0x%02x"
+max11615_event(uint8_t i2c_addr, uint8_t event) "i2c_addr: 0x%02x, event:
0x%02x"
+max11615_realize(uint8_t i2c_addr) "i2c_addr: 0x%02x"
diff --git a/include/hw/sensor/max11615.h b/include/hw/sensor/max11615.h
new file mode 100644
index 0000000000..ccc0c9bc2e
--- /dev/null
+++ b/include/hw/sensor/max11615.h
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+#ifndef QEMU_MAX11615_H
+#define QEMU_MAX11615_H
+
+#include <stdint.h>
+#include "hw/i2c/i2c.h"
+
+#define TYPE_MAX11615 "max11615"
+
+/*
+ * Create and realize a MAX11615 ADC with constant caller-supplied readings
+ * @bus: I2C bus to put it on
+ * @address: I2C address
+ * @init_values: array of readings for each ADC channel
+ * @init_values_size: Size of @init_values, can be less than the number of
channels
+ */
+I2CSlave *max11615_init_with_values(I2CBus *bus, uint8_t address,
+ const uint16_t *init_values, uint32_t
init_values_size);
+
+#endif
diff --git a/tests/functional/arm/test_aspeed_fby4.py
b/tests/functional/arm/test_aspeed_fby4.py
index d29423add7..319f1a7672 100755
--- a/tests/functional/arm/test_aspeed_fby4.py
+++ b/tests/functional/arm/test_aspeed_fby4.py
@@ -51,6 +51,14 @@ def do_test_arm_aspeed_openbmc_no_network(self, machine,
image, uboot,
exec_command_and_wait_for_pattern(self,
"cat /sys/class/hwmon/hwmon2/fan1_fault", "0");
+ # MAX11615 test
+ exec_command_and_wait_for_pattern(self,
+ "cat /sys/bus/iio/devices/iio:device2/name", "max11615");
+ exec_command_and_wait_for_pattern(self,
+ "cat /sys/bus/iio/devices/iio:device2/in_voltage0_raw", "1922");
+ exec_command_and_wait_for_pattern(self,
+ "cat /sys/bus/iio/devices/iio:device2/in_voltage_scale",
"0.500000000");
+
def test_arm_ast2600_yosemitev4_openbmc(self):
image_path = self.uncompress(self.ASSET_YOSEMITE_V4_FLASH)
