This patch is an attempt to fix the non-continguous-APIC-ID problem without the
FW_CFG_LAPIC_INFO approach I have sent proposed last week.
Basically, this changes Seabios to probe for APIC IDs directly from the
CPUs on boot, instead of getting it using fw_cfg, store the found APIC
IDs on a bitmap, and use that information whe building the MADT, SRAT,
and SSDT ACPI tables.
To do this properly, we have to decide the meaning of "CPU IDs" in the
QEMU<->Seabios interfaces, too. I see two possible approaches:
1) Have Seabios and QEMU agree on a a "CPU identifier", that is
independent from the APIC ID.
2) Always use the Initial APIC ID on all communication between QEMU and
Seabios.
This patch implements the second approach. That means:
- QEMU won't know anything about the ACPI Processor IDs chosen by
Seabios;
- The NUMA CPU affinity table in QEMU_CFG_NUMA is APIC-ID-based, not
Processor-ID-based;
- The CPU hotplug bitmaps on I/O port 0xaf00 will be APIC-ID-based, too.
Internally, the following changes were made on the ACPI code:
- The CPON array is now APIC-ID-based
- The NTFY method now gets the CPU APIC ID as parameter
- The CPMA method now gets two parameters: the Processor ID and the
APIC ID
- The CPST method now gets the CPU APIC ID as parameter
To try to make things less likely to break on the common, non-hotplug
case, this patch makes the Processor IDs be chosen this way:
- The CPUs present on boot get contiguous Processor IDs (even if the
APIC IDs are not contiguous);
- The remaining Processor declarations are going to associated to the
remaining APIC IDs (immediately after the last present APIC ID),
sequentially. This means that hotplugged CPUs may not get contiguous
Processor declarations if their APIC IDs are not contiguous.
I would like to know what others think about this approach. I think it
is a much simpler approach than relying on some APIC ID <=> CPU ID
translation to make Seabios and QEMU agree. This way, Seabios has
absolute freedom to choose the ACPI Processor IDs.
Signed-off-by: Eduardo Habkost <ehabk...@redhat.com>
---
src/acpi-dsdt.dsl | 11 ++++--
src/acpi.c | 109 ++++++++++++++++++++++++++++++++++++++++++++---------
src/smp.c | 17 +++++++++
src/ssdt-proc.dsl | 12 ++++--
src/util.h | 3 ++
5 files changed, 127 insertions(+), 25 deletions(-)
diff --git a/src/acpi-dsdt.dsl b/src/acpi-dsdt.dsl
index 2060686..51ca037 100644
--- a/src/acpi-dsdt.dsl
+++ b/src/acpi-dsdt.dsl
@@ -674,20 +674,23 @@ DefinitionBlock (
External(CPON, PkgObj)
/* Methods called by run-time generated SSDT Processor objects */
- Method (CPMA, 1, NotSerialized) {
+ Method (CPMA, 2, NotSerialized) {
// _MAT method - create an madt apic buffer
+ // Arg0 = Processor ID
+ // Arg1 = Local APIC ID
// Local0 = CPON flag for this cpu
- Store(DerefOf(Index(CPON, Arg0)), Local0)
+ Store(DerefOf(Index(CPON, Arg1)), Local0)
// Local1 = Buffer (in madt apic form) to return
Store(Buffer(8) {0x00, 0x08, 0x00, 0x00, 0x00, 0, 0, 0}, Local1)
// Update the processor id, lapic id, and enable/disable status
Store(Arg0, Index(Local1, 2))
- Store(Arg0, Index(Local1, 3))
+ Store(Arg1, Index(Local1, 3))
Store(Local0, Index(Local1, 4))
Return (Local1)
}
Method (CPST, 1, NotSerialized) {
// _STA method - return ON status of cpu
+ // Arg0 = Local APIC ID
// Local0 = CPON flag for this cpu
Store(DerefOf(Index(CPON, Arg0)), Local0)
If (Local0) { Return(0xF) } Else { Return(0x0) }
@@ -708,7 +711,7 @@ DefinitionBlock (
Store (PRS, Local5)
// Local2 = last read byte from bitmap
Store (Zero, Local2)
- // Local0 = cpuid iterator
+ // Local0 = APIC ID iterator
Store (Zero, Local0)
While (LLess(Local0, SizeOf(CPON))) {
// Local1 = CPON flag for this cpu
diff --git a/src/acpi.c b/src/acpi.c
index 55e4607..149ff42 100644
--- a/src/acpi.c
+++ b/src/acpi.c
@@ -302,6 +302,63 @@ build_fadt(struct pci_device *pci)
return fadt;
}
+
+/* APIC IDs of each Processor indexed by ACPI Processor ID.
+ * Used to make the MADT entries and SSDT Processor declarations
+ * match each other.
+ */
+static u8 *processor_apic_ids;
+
+/* Number of Processor IDs that have a valid 8-bit APIC ID */
+static int count_valid_apic_ids;
+
+/* Build a ACPI Processor ID -> Local APIC ID table, used for the MADT
+ * and SSDT Processor declarations.
+ * The CPUs present at boot will be assigned to the first entries.
+ * The remaining entries will get sequential APIC IDs.
+ */
+static void
+check_apic_ids(void)
+{
+ processor_apic_ids = malloc_high(MaxCountCPUs);
+ if (!processor_apic_ids) {
+ warn_noalloc();
+ count_valid_apic_ids = 0;
+ return;
+ }
+
+ int i;
+ int apic_id = 0;
+ int last_present_apic_id = 0;
+
+ // the first entries are for the already-present CPUs:
+ for (i = 0; i < MaxCountCPUs; i++) {
+ // look for next present APIC ID:
+ while (apic_id <= MAX_APIC_ID && !apic_id_is_present(apic_id))
+ apic_id++;
+
+ if (apic_id > MAX_APIC_ID)
+ break; // no more valid APIC IDs
+
+ processor_apic_ids[i] = apic_id;
+ last_present_apic_id = apic_id;
+ apic_id++;
+ }
+
+ // the remaining entries will get sequential APIC IDs assigned, up to
+ // MAX_APIC_ID
+ apic_id = last_present_apic_id;
+ for ( ; i < MaxCountCPUs; i++) {
+ apic_id++;
+ if (apic_id > MAX_APIC_ID)
+ break;
+
+ processor_apic_ids[i] = apic_id;
+ }
+
+ count_valid_apic_ids = i;
+}
+
static void*
build_madt(void)
{
@@ -321,15 +378,16 @@ build_madt(void)
madt->flags = cpu_to_le32(1);
struct madt_processor_apic *apic = (void*)&madt[1];
int i;
- for (i=0; i<MaxCountCPUs; i++) {
+ for (i = 0; i < count_valid_apic_ids; i++) {
apic->type = APIC_PROCESSOR;
apic->length = sizeof(*apic);
apic->processor_id = i;
- apic->local_apic_id = i;
- if (i < CountCPUs)
+ apic->local_apic_id = processor_apic_ids[i];
+ if (apic_id_is_present(apic->local_apic_id)) {
apic->flags = cpu_to_le32(1);
- else
+ } else {
apic->flags = cpu_to_le32(0);
+ }
apic++;
}
struct madt_io_apic *io_apic = (void*)apic;
@@ -402,6 +460,7 @@ encodeLen(u8 *ssdt_ptr, int length, int bytes)
#define SD_OFFSET_CPUHEX (*ssdt_proc_name - *ssdt_proc_start + 2)
#define SD_OFFSET_CPUID1 (*ssdt_proc_name - *ssdt_proc_start + 4)
#define SD_OFFSET_CPUID2 (*ssdt_proc_id - *ssdt_proc_start)
+#define SD_OFFSET_APICID (*ssdt_proc_apic_id - *ssdt_proc_start)
#define SD_SIZEOF (*ssdt_proc_end - *ssdt_proc_start)
#define SD_PROC (ssdp_proc_aml + *ssdt_proc_start)
@@ -410,12 +469,13 @@ encodeLen(u8 *ssdt_ptr, int length, int bytes)
static void*
build_ssdt(void)
{
- int acpi_cpus = MaxCountCPUs > 0xff ? 0xff : MaxCountCPUs;
+ int acpi_cpus = count_valid_apic_ids;
+ int cpon_size = count_valid_apic_ids ?
processor_apic_ids[count_valid_apic_ids - 1] + 1 : 0;
// length = ScopeOp + procs + NTYF method + CPON package
int length = ((1+3+4)
+ (acpi_cpus * SD_SIZEOF)
+ (1+2+5+(12*acpi_cpus))
- + (6+2+1+(1*acpi_cpus))
+ + (6+2+1+(1*cpon_size))
+ 17);
u8 *ssdt = malloc_high(sizeof(struct acpi_table_header) + length);
if (! ssdt) {
@@ -440,10 +500,12 @@ build_ssdt(void)
ssdt_ptr[SD_OFFSET_CPUHEX+1] = getHex(i);
ssdt_ptr[SD_OFFSET_CPUID1] = i;
ssdt_ptr[SD_OFFSET_CPUID2] = i;
+ ssdt_ptr[SD_OFFSET_APICID] = processor_apic_ids[i];
ssdt_ptr += SD_SIZEOF;
}
// build "Method(NTFY, 2) {If (LEqual(Arg0, 0x00)) {Notify(CP00, Arg1)}
...}"
+ // Arg0 = APIC ID
*(ssdt_ptr++) = 0x14; // MethodOp
ssdt_ptr = encodeLen(ssdt_ptr, 2+5+(12*acpi_cpus), 2);
*(ssdt_ptr++) = 'N';
@@ -457,7 +519,7 @@ build_ssdt(void)
*(ssdt_ptr++) = 0x93; // LEqualOp
*(ssdt_ptr++) = 0x68; // Arg0Op
*(ssdt_ptr++) = 0x0A; // BytePrefix
- *(ssdt_ptr++) = i;
+ *(ssdt_ptr++) = processor_apic_ids[i];
*(ssdt_ptr++) = 0x86; // NotifyOp
*(ssdt_ptr++) = 'C';
*(ssdt_ptr++) = 'P';
@@ -467,6 +529,7 @@ build_ssdt(void)
}
// build "Name(CPON, Package() { One, One, ..., Zero, Zero, ... })"
+ // CPON array is APIC-ID based, not Processor ID based
*(ssdt_ptr++) = 0x08; // NameOp
*(ssdt_ptr++) = 'C';
*(ssdt_ptr++) = 'P';
@@ -474,9 +537,9 @@ build_ssdt(void)
*(ssdt_ptr++) = 'N';
*(ssdt_ptr++) = 0x12; // PackageOp
ssdt_ptr = encodeLen(ssdt_ptr, 2+1+(1*acpi_cpus), 2);
- *(ssdt_ptr++) = acpi_cpus;
- for (i=0; i<acpi_cpus; i++)
- *(ssdt_ptr++) = (i < CountCPUs) ? 0x01 : 0x00;
+ *(ssdt_ptr++) = cpon_size;
+ for (i=0; i<cpon_size; i++)
+ *(ssdt_ptr++) = (apic_id_is_present(i)) ? 0x01 : 0x00;
// store pci io windows: start, end, length
// this way we don't have to do the math in the dsdt
@@ -644,30 +707,40 @@ build_srat(void)
memset(srat, 0, srat_size);
srat->reserved1=1;
struct srat_processor_affinity *core = (void*)(srat + 1);
- int i;
+ int apic_id;
u64 curnode;
+ u64 *cpudata = numadata;
- for (i = 0; i < MaxCountCPUs; ++i) {
+ /* Note that the fw_cfg NUMA CPU affinity data is APIC-ID-based, not
+ * Processor ID based, but the size of the tablesble is based on
MaxCountCPUs
+ */
+ for (apic_id = 0; apic_id < MaxCountCPUs; ++apic_id) {
+ if (apic_id > MAX_APIC_ID)
+ break;
+ curnode = *cpudata++;
core->type = SRAT_PROCESSOR;
core->length = sizeof(*core);
- core->local_apic_id = i;
- curnode = *numadata++;
core->proximity_lo = curnode;
memset(core->proximity_hi, 0, 3);
core->local_sapic_eid = 0;
- if (i < CountCPUs)
+ core->local_apic_id = apic_id;
+ if (apic_id_is_present(apic_id)) {
core->flags = cpu_to_le32(1);
- else
- core->flags = 0;
+ } else {
+ core->flags = cpu_to_le32(0);
+ }
core++;
}
+ numadata += MaxCountCPUs;
+
/* the memory map is a bit tricky, it contains at least one hole
* from 640k-1M and possibly another one from 3.5G-4G.
*/
struct srat_memory_affinity *numamem = (void*)core;
int slots = 0;
+ int i;
u64 mem_len, mem_base, next_base = 0;
acpi_build_srat_memory(numamem, 0, 640*1024, 0, 1);
@@ -742,6 +815,8 @@ acpi_bios_init(void)
tbl_idx++; \
} while(0)
+ check_apic_ids();
+
struct fadt_descriptor_rev1 *fadt = build_fadt(pci);
ACPI_INIT_TABLE(fadt);
ACPI_INIT_TABLE(build_ssdt());
diff --git a/src/smp.c b/src/smp.c
index 8c077a1..af92e4a 100644
--- a/src/smp.c
+++ b/src/smp.c
@@ -36,6 +36,8 @@ wrmsr_smp(u32 index, u64 val)
u32 CountCPUs VAR16VISIBLE;
u32 MaxCountCPUs VAR16VISIBLE;
+// 256 bits for the found APIC IDs
+u32 FoundAPICIDs[256/32] VAR16VISIBLE;
extern void smp_ap_boot_code(void);
ASM16(
" .global smp_ap_boot_code\n"
@@ -59,6 +61,12 @@ ASM16(
" jmp 1b\n"
"2:\n"
+ // get apic ID on EBX, set bit on FoundAPICIDs
+ " mov $1, %eax\n"
+ " cpuid\n"
+ " shrl $24, %ebx\n"
+ " lock bts %ebx, FoundAPICIDs\n"
+
// Increment the cpu counter
" lock incl CountCPUs\n"
@@ -67,6 +75,11 @@ ASM16(
" jmp 1b\n"
);
+int apic_id_is_present(u8 apic_id)
+{
+ return FoundAPICIDs[apic_id/32] & (1 << (apic_id % 32));
+}
+
// find and initialize the CPUs by launching a SIPI to them
void
smp_probe(void)
@@ -82,6 +95,10 @@ smp_probe(void)
return;
}
+ // mark the BSP initial APIC ID as found, too:
+ u8 apic_id = ebx>>24;
+ FoundAPICIDs[apic_id/32] |= (1 << (apic_id % 32));
+
// Init the counter.
writel(&CountCPUs, 1);
diff --git a/src/ssdt-proc.dsl b/src/ssdt-proc.dsl
index 0339422..7e7e855 100644
--- a/src/ssdt-proc.dsl
+++ b/src/ssdt-proc.dsl
@@ -5,13 +5,15 @@
* be placed in the \_SB_ namespace.
*
* In addition to the aml code generated from this file, the
- * src/acpi.c file creates a NTFY method with an entry for each cpu:
+ * src/acpi.c file creates a NTFY method with an entry for each cpu,
+ * that checks for the APIC ID:
* Method(NTFY, 2) {
* If (LEqual(Arg0, 0x00)) { Notify(CP00, Arg1) }
* If (LEqual(Arg0, 0x01)) { Notify(CP01, Arg1) }
* ...
* }
- * and a CPON array with the list of active and inactive cpus:
+ * and a CPON array with the list of active and inactive cpus,
+ * indexed by the APIC ID:
* Name(CPON, Package() { One, One, ..., Zero, Zero, ... })
*/
@@ -25,6 +27,8 @@ DefinitionBlock ("ssdt-proc.aml", "SSDT", 0x01, "BXPC",
"BXSSDT", 0x1)
Processor (CPAA, 0xAA, 0x0000b010, 0x06) {
ACPI_EXTRACT_NAME_BYTE_CONST ssdt_proc_id
Name (ID, 0xAA)
+ ACPI_EXTRACT_NAME_BYTE_CONST ssdt_proc_apic_id
+ Name (APIC, 0xAA)
/*
* The src/acpi.c code requires the above ACP_EXTRACT tags so that it can
update
* CPAA and 0xAA with the appropriate CPU id (see
@@ -36,10 +40,10 @@ DefinitionBlock ("ssdt-proc.aml", "SSDT", 0x01, "BXPC",
"BXSSDT", 0x1)
External(CPST, MethodObj)
External(CPEJ, MethodObj)
Method(_MAT, 0) {
- Return(CPMA(ID))
+ Return(CPMA(ID, APIC))
}
Method (_STA, 0) {
- Return(CPST(ID))
+ Return(CPST(APIC))
}
Method (_EJ0, 1, NotSerialized) {
CPEJ(ID, Arg0)
diff --git a/src/util.h b/src/util.h
index ef8ec7c..a68f56b 100644
--- a/src/util.h
+++ b/src/util.h
@@ -351,10 +351,13 @@ void pci_setup(void);
void smm_init(void);
// smp.c
+#define MAX_APIC_ID 0xFE
+
extern u32 CountCPUs;
extern u32 MaxCountCPUs;
void wrmsr_smp(u32 index, u64 val);
void smp_probe(void);
+int apic_id_is_present(u8 apic_id);
// coreboot.c
extern const char *CBvendor, *CBpart;
--
1.7.10.4
