On 7/29/26 19:48, Michael S. Tsirkin wrote:
On Wed, Jul 29, 2026 at 07:07:11PM +0500, Alexandr Moshkov wrote:On 7/29/26 17:13, Michael S. Tsirkin wrote:On Wed, Jul 29, 2026 at 03:56:54PM +0500, Alexandr Moshkov wrote:On 7/29/26 15:48, Michael S. Tsirkin wrote: On Wed, Jul 29, 2026 at 03:35:31PM +0500, Alexandr Moshkov wrote: On 7/29/26 15:14, Michael S. Tsirkin wrote: On Wed, Jul 29, 2026 at 03:09:57PM +0500, Alexandr Moshkov wrote: On 7/29/26 14:32, Michael S. Tsirkin wrote: On Tue, Jul 28, 2026 at 03:08:39PM +0500, Alexandr Moshkov wrote: When migrating from a QEMU version that supports inflight-migration to an older one that does not, there is no way to disable the feature at runtime — the VM must be stopped and reconfigured. This is impractical in production environments. Make the inflight-migration property mutable after device realization so it can be toggled via qom-set without restarting the VM. Acked-by: Raphael Norwitz <[email protected]> Signed-off-by: Alexandr Moshkov <[email protected]> I think I am beginning to understand. You are running qemu with inflight-migration on and want to migrate to qemu without inflight-migration at all. Since it is guest transparent you could retrofit it like this. My question is why is it worth it, we do not normally support migrating between qemu versions with different command lines. I think you right. Maybe I've been focusing too much on the ability to migrate between versions of qemu with and without inflight migration. This series allows to turn off and on the inflight-migration feature at runtime without recreating the VMrestarting you mean.Yes, sorry.(it was the only way to turn off the feature, since the protocol feature could no longer be turned off, after initialization with the backend). This is more important feature, and it leads to the fact that this feature allows to migrate between different versions of qemu (with and without inflight-migration support).so again it's not the 1st feature we have like this. we tie migration to the machine type and same set of command line flags specifically to keep things manageable. really cross version migration is a pain as it is.I understand that, thanks! Maybe we should focus on the fact that this series allows to turn inflight_migration on and off (without cross version migration) ? Firstly, I wanted to implement this through migration capabilities, but in one of the threads, it was agreed that a separate capability only for vhost-user-blk is not a good idea.I mean it's a generic thing.Therefore, I implemented it through a parameter that can be changed using qom-set.--- hw/block/vhost-user-blk.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/hw/block/vhost-user-blk.c b/hw/block/vhost-user-blk.c index e3b873af7c..650c004bde 100644 --- a/hw/block/vhost-user-blk.c +++ b/hw/block/vhost-user-blk.c @@ -619,6 +619,8 @@ static const VMStateDescription vmstate_vhost_user_blk = { } }; +static PropertyInfo vhost_user_blk_inflight_migration_prop; + static const Property vhost_user_blk_properties[] = { DEFINE_PROP_CHR("chardev", VHostUserBlk, chardev), DEFINE_PROP_UINT16("num-queues", VHostUserBlk, num_queues, @@ -632,8 +634,9 @@ static const Property vhost_user_blk_properties[] = { VIRTIO_BLK_F_WRITE_ZEROES, true), DEFINE_PROP_BOOL("skip-get-vring-base-on-force-shutdown", VHostUserBlk, skip_get_vring_base_on_force_shutdown, false), - DEFINE_PROP_BOOL("inflight-migration", VHostUserBlk, - inflight_migration, false), + DEFINE_PROP("inflight-migration", VHostUserBlk, inflight_migration, + vhost_user_blk_inflight_migration_prop, bool, + .set_default = true, .defval.u = false), }; static void vhost_user_blk_class_init(ObjectClass *klass, const void *data) @@ -665,6 +668,9 @@ static const TypeInfo vhost_user_blk_info = { static void virtio_register_types(void) { + vhost_user_blk_inflight_migration_prop = qdev_prop_bool; + vhost_user_blk_inflight_migration_prop.realized_set_allowed = true; + type_register_static(&vhost_user_blk_info); } So then, for example, let us say I paused the VM, then set the flag, now inflight is on but GET_BASE did not drain it? If I understood the question correctly, this is valid behavior. Before migration QEMU check protocol features to understand does the backend support inflight migration. If it does, after that QEMU migrate inflight buffer to other VM. If it's not, return error before migration started. I apologise i reverted the logic in the question. I start vm and inflight is on. I stop vm get base does not drain. In case of VM stop, backend wait to drain all requests. Ability to perform drain or not available only during migration by skip_drain variable in vhost_user_blk_stop(). What if it was migration but it failed? If migration failed, source vm just keep using inflight region, backend continue to execute inflight requests that was tried to migrate.Sorry, to be more clear. I mean migration succeeded but destination failed to start, so now vm is stopped and we are now trying migrating to a different destination.Is this a real case? I was thinking in case of any destination errors (migration process or starting), source vm has to work...It does not start automatically in all cases, no.I guess in that case, inflight requests can only be executed on different destination or in current destination if vm be able to start.IIUC currently on VM stop we simply send GET_BASE and this stops backend, and depending on features things remain in the inflight buffer. Correct me if I am wrong.Yes backend has to disconnect from QEMU.. So it not be changing guest memory.I think that we do not want a slow flush on vm stop if we can avoid it, and we also do not want backend to keep changing guest memory when VM is stopped. No?Yes, it isskip_drain true only if inflight_migration is on and runstate is FINISH_MIGRATION.FINISH_MIGRATE? actually i do not see where it affects it.Sorry, I didn't understand) Who affects who?This btw I don't much like, a stopped VM would preferably behave the same whatever the reason to stop. Well, I don't see any other way to implement this.I am not 100% sure it's implementable as described, but I guess you could block changing the property if VM and thus the backend is not connected and running. Which is even more complexity but at least it is consistent.Oh, I understand what you thinking about. I agreed, but why implementation (in this series) is not consistent? I was thinking that current (in current qemu version) impl is not, because GET_VRING_BASE has two behaviors, depending on the presence of the protocol feature (drain or not drain requests). Now, I think it would be more clear: one message for drain GET_VRING_BASE (as it was before), one for not drain GET_VRING_BASE_SKIP_DRAIN.Well the message is consistent. But its use does not seem to be.I think backend must perform drain in all cases except live migration with all the necessary checks (protocol features, special message GET_VRING_BASE_SKIP_DRAIN).This is not what is going on now, right? Whether it drains depends on protocol features not on VM state and I think we should keep it like this.Well yes, now in current qemu version drain or not drain depends on protocol feature only, that try to be negotiated only if inflight_migration is set on. In patch: in case live migration (if protocol feature and device param) sent message GET_VRING_BASE_SKIP_DRAIN to skip drain, in other cases sent other message - GET_VRING_BASE with draining all requests. So drain or not drain depends on message that QEMU send to backend.i turn inflight off. now it looks like it will happily migrate? So in this case, when vm migrated with inflight off, it will leads to using GET_VRING_BASE message, that wait all requests to be drained. -- 2.34.1i mean it migrated with on. vm was stopped then it flipped to off.After stop vm will send GET_VRING_BASE to backend, that lead to drain all requests. Non of the inflight requests will be missed here, If that's what you mean.this: + bool skip_drain = vhost_user_blk_inflight_needed(s) && + runstate_check(RUN_STATE_FINISH_MIGRATE); is what I dislike. I dislike poking at migration state. It's painful enough that we need to worry about VM running or not.
I understand that. But I don't know how to do it another way. We can't just erase runstate check - it will possibly leads to missing inflight requests during VM stop.
And don't know how to make stop more consistent. Do you have any thoughts?
