Mikail,

On 8/13/26 21:30, Mikail Sadic wrote:
This series adds initial support for the IBM Huygens BMC, the baseboard
management controller of an IBM POWER12 server platform, based on the
ASPEED AST2700 A2 SoC.

It introduces a CFAM-S FSI responder model, wires the AST2700 FSI
controllers to their APB-to-OPB bridges, adds a TI UCD90320 PMBus
power-sequencer model, adds an AST2700 UFS host controller on top of the
generic sysbus UFS device, and finally adds the huygens-bmc machine that
ties these together to boot OpenBMC from FMC flash and a UFS root
filesystem.

Dependencies, both on-list, neither merged yet:

1. Jeuk Kim's UFS restructure, which patches 5 and 6 build on:

      
https://lore.kernel.org/qemu-devel/[email protected]/


Since this series is the primary user of the UFS restructure, would you
have time to review it ?


    The base-commit trailer below therefore names a local commit: current
    master plus those two patches. Patches 1-4 and 7 do not need it.

2. Jamin Lin's I2C block-read fix:

      
https://patchwork.kernel.org/project/qemu-devel/patch/[email protected]/

Same here.

Thanks,

C.


    This one is a runtime rather than a build dependency, which is why the
    series is not based on it. Everything compiles and every machine
    constructs without it, but the UCD90320 in patch 4 will not probe,
    because the ucd9000 driver identifies the device with an SMBus block
    read and the AST2700 reports the block length from a register that
    patch models. I have tested his patch against that driver and it works;
    the Huygens-BMC boot was run with it applied.

    The guest also needs a kernel that reads the block length from the
    right register on AST2700, i.e. one carrying

      https://github.com/AspeedTech-BMC/linux/commit/f9938ec5799e

Patch summary:

   1. fsi/cfam: a common CFAM model holding the slot, config table,
      responder and local bus, with the existing cfam as its first
      derivative. No functional change to the existing cfam.
   2. fsi/cfam: the CFAM-S as a second derivative - its own config table,
      the slave-ID alias window, and a v1 mailbox engine added to lbus.c
      alongside the scratchpad.
   3. arm/aspeed: wire the two AST2700 FSI controllers to their APB-to-OPB
      bridges.
   4. hw/sensor: TI UCD90320 24-rail PMBus power sequencer.
   5. ufs: a configurable logical-block-size on ufs-lu, and an unmapped LUN
      answering INQUIRY as "not connected". The ufs PCI device keeps its
      current property set and geometry.
   6. ufs/aspeed: the AST2700 UFS host controller as a subclass of
      TYPE_SYSBUS_UFS, adding only the UFSHCI version.
   7. arm/aspeed: the huygens-bmc machine.

Changes since v3:

* Dropped the i2c/aspeed patch (v3 4/8). Jamin Lin has posted the correct
   implementation, which the UCD90320 now depends on instead; reviewed and
   tested, see the dependency note above. The guest also needs the AST2700
   kernel fix linked there.

* Rebased onto current master, which is past the 11.1.0 release. v3 was on
   v11.1.0-rc3. The only conflict was hw/arm/Kconfig, where the UCD90320
   select landed next to the newly added ADC128D818 one.

* No other patch changed. Patches 1-3 and 5-7 are the v3 patches with
   only their numbering shifted.

Not addressed in this series:

* CFAM extended addressing (Miles): the mode where a single CFAM has 8MB
   rather than four cascaded CFAMs sharing that space. This changes the
   addressing model of the existing FSI/CFAM code rather than anything this
   series introduces, so it's left as follow-up work. It does bear on
   patch 2 though: the CFAM-S there aliases one 2MiB slot across the 8MiB
   window to fold the slave-ID views together, and if extended addressing
   is modelled properly that window is probably the wrong shape or should
   not exist at all.

* A functional test for the machine. The v1 test depended on non-public
   Huygens images and was dropped; it will be resent once images can be
   published.

Testing done:

* Whole series builds, and each of the 7 patches builds standalone.
* make check passes.
* huygens-bmc boots OpenBMC to the login prompt and multi-user target
   from FMC flash + UFS storage (internal images), with Jamin's I2C patch
   applied. The UCD90320 probes, reports its device identification over an
   SMBus block read, and the power sequencer publishes system power state.
* PCI UFS qtests pass (13/13), unchanged by patch 5.
* aspeed_fsi-test passes (4/4), unchanged by the CFAM patches.
* huygens-bmc, ast2700-evb and ast2600-evb all construct successfully.
* On huygens-bmc, the UFS version register reads 0x00000200, and the
   ufs-lu created by the board reports a 512-byte block size and passes it
   to its backing scsi-hd. The PCI ufs device with no property set still
   reports 4096.

Changes since v2 (unchanged from the v3 posting, for reference):

* UFS: rebased onto Jeuk Kim's restructure, as requested. The v2 core
   refactor (v2 patch 6) is dropped entirely, Jeuk's patch 1 supersedes it.
   hw/ufs/aspeed_ufs.c is now a subclass of TYPE_SYSBUS_UFS whose only
   AST2700-specific behavior is pinning the controller version register
   to 2.0, chained after the parent realize. MMIO, IRQ, DMA address space,
   properties, migration state and unrealize all come from the generic
   sysbus device, and the Aspeed type adds no instance fields.

   The two behaviors Huygens needs that the restructure does not provide
   are now their own patch, placed ahead of the Aspeed patch: the ufs-lu
   logical-block-size property (default unchanged, so the PCI device is
   unaffected) and the unmapped-LUN INQUIRY reporting "not connected"
   rather than failing the request. logical-block-size now also rejects
   non-powers-of-two, values outside 512..UFS_BLOCK_SIZE, and a drive
   shorter than one block, which would previously have realized a
   zero-block unit.

   The Aspeed SoC Kconfig now selects UFS_SYSBUS. It previously relied on
   UFS_PCI being enabled via "imply PCI_DEVICES".

* CFAM: dropped the State suffix from the instance struct names (Miles).
   FSICFAMCommonState becomes FSICFAMCommon; FSICFAMState, which predates
   this series, becomes FSICFAM to match rather than leaving the two
   spellings side by side in one header; FSICFAMSState becomes FSICFAMS.
   The FSI prefix is kept. The class structs keep their suffix, as is
   usual for QOM. Also fixed patch 1 to check the realize_engines() return
   value.

* Machine: reworded the commit message (Miles). No code change.

Note: checkpatch reports a couple of MAINTAINERS/SPDX warnings for the
new files; they are covered by existing wildcard entries in the ASPEED
and FSI sections.

Thank you again for all of the feedback.

Mikail Sadic (7):
   fsi/cfam: Add common CFAM base class
   fsi/cfam: Add CFAM-S model
   arm/aspeed: Wire AST2700 FSI controllers to APB-to-OPB bridges
   hw/sensor: Add UCD90320 model
   ufs: Make the logical block size configurable and answer absent LUNs
   ufs/aspeed: Add AST2700 UFS host controller
   arm/aspeed: Add AST2700 Huygens machine

  MAINTAINERS                     |   3 +
  docs/specs/aspeed-ufs.rst       |  46 ++++++
  docs/specs/fsi.rst              |  15 ++
  docs/specs/index.rst            |   2 +
  docs/specs/ucd90320.rst         |  36 +++++
  docs/system/arm/aspeed.rst      |  50 ++++++-
  hw/ufs/ufs.h                    |   3 +
  include/hw/arm/aspeed.h         |   1 +
  include/hw/arm/aspeed_soc.h     |   3 +
  include/hw/fsi/cfam-s.h         |  40 ++++++
  include/hw/fsi/cfam.h           |  68 ++++++++-
  include/hw/fsi/fsi-master.h     |   4 +-
  include/hw/fsi/lbus.h           |  11 ++
  include/hw/ufs/aspeed_ufs.h     |  15 ++
  hw/arm/aspeed.c                 |  25 ++++
  hw/arm/aspeed_ast27x0.c         |  31 ++++
  hw/arm/aspeed_ast27x0_huygens.c | 241 ++++++++++++++++++++++++++++++++
  hw/fsi/cfam-s.c                 |  91 ++++++++++++
  hw/fsi/cfam.c                   | 125 ++++++++++-------
  hw/fsi/fsi-master.c             |   9 +-
  hw/fsi/lbus.c                   |  69 +++++++++
  hw/sensor/ucd90320.c            | 169 ++++++++++++++++++++++
  hw/ufs/aspeed_ufs.c             |  67 +++++++++
  hw/ufs/lu.c                     |  67 ++++++++-
  hw/ufs/ufs.c                    |   2 +-
  hw/arm/Kconfig                  |   2 +
  hw/arm/meson.build              |   1 +
  hw/fsi/meson.build              |   2 +-
  hw/fsi/trace-events             |   2 +
  hw/sensor/Kconfig               |   4 +
  hw/sensor/meson.build           |   1 +
  hw/ufs/meson.build              |   1 +
  32 files changed, 1142 insertions(+), 64 deletions(-)
  create mode 100644 docs/specs/aspeed-ufs.rst
  create mode 100644 docs/specs/ucd90320.rst
  create mode 100644 include/hw/fsi/cfam-s.h
  create mode 100644 include/hw/ufs/aspeed_ufs.h
  create mode 100644 hw/arm/aspeed_ast27x0_huygens.c
  create mode 100644 hw/fsi/cfam-s.c
  create mode 100644 hw/sensor/ucd90320.c
  create mode 100644 hw/ufs/aspeed_ufs.c


base-commit: 7a66901b243ca3b401db8a8e45245e0518339974


Reply via email to