Enable network booting via virtio-net-pci by implementing PCI transport support for virtio-net.
This patch also extends endianness handling for virtio PCI ring operations in little-endian to ensure correct behavior on s390x. Signed-off-by: Zhuoying Cai <[email protected]> --- pc-bios/s390-ccw/main.c | 1 + pc-bios/s390-ccw/netmain.c | 9 +++++++- pc-bios/s390-ccw/virtio-net.c | 41 ++++++++++++++++++++++++++++------- pc-bios/s390-ccw/virtio-pci.c | 18 +++++++++++++++ 4 files changed, 60 insertions(+), 9 deletions(-) diff --git a/pc-bios/s390-ccw/main.c b/pc-bios/s390-ccw/main.c index 8fc1cbf653..28cab3b411 100644 --- a/pc-bios/s390-ccw/main.c +++ b/pc-bios/s390-ccw/main.c @@ -332,6 +332,7 @@ static void ipl_pci_device(void) } switch (vdev->dev_type) { + case VIRTIO_ID_NET: case VIRTIO_ID_BLOCK: if (virtio_setup() == 0) { zipl_load(); /* only return on error */ diff --git a/pc-bios/s390-ccw/netmain.c b/pc-bios/s390-ccw/netmain.c index bcb62bf6ca..e42e049063 100644 --- a/pc-bios/s390-ccw/netmain.c +++ b/pc-bios/s390-ccw/netmain.c @@ -498,7 +498,14 @@ int netmain(void) sclp_setup(); puts("Network boot starting..."); - if (!virtio_ccw_net_setup()) { + /* + * CCW devices require subchannel enumeration here. + * PCI devices don't require specific setup: the transport is already + * initialized by ipl_pci_device(), and virtio_is_supported() is checked + * later in virtio_net_init(). + */ + if (virtio_get_device()->ipl_type == S390_IPL_TYPE_CCW && + !virtio_ccw_net_setup()) { puts("No valid virtio ccw net device found."); return -1; } diff --git a/pc-bios/s390-ccw/virtio-net.c b/pc-bios/s390-ccw/virtio-net.c index afa728bc32..418759565d 100644 --- a/pc-bios/s390-ccw/virtio-net.c +++ b/pc-bios/s390-ccw/virtio-net.c @@ -68,7 +68,22 @@ int virtio_net_init(void *mac_addr) rx_last_idx = 0; vdev->guest_features[0] = VIRTIO_NET_F_MAC_BIT; - virtio_ccw_setup(vdev); + switch (virtio_get_device()->ipl_type) { + case S390_IPL_TYPE_CCW: + if (virtio_ccw_setup(vdev)) { + puts("Setup failed for virtio-net-ccw"); + return -1; + } + break; + case S390_IPL_TYPE_PCI: + if (virtio_pci_setup(vdev)) { + puts("Setup failed for virtio-net-pci"); + return -1; + } + break; + default: + return -1; + } if (!(vdev->guest_features[0] & VIRTIO_NET_F_MAC_BIT)) { puts("virtio-net device does not support the MAC address feature"); @@ -121,22 +136,30 @@ int recv(int fd, void *buf, int maxlen, int flags) VRing *rxvq = &vdev->vrings[VQ_RX]; int len, id; uint8_t *pkt; + uint16_t rx_used_idx, rx_avail_idx; + uint32_t rx_used_len, rx_used_id; + uint64_t rx_desc_addr; - if (rx_last_idx == rxvq->used->idx) { + rx_used_idx = virtio_tswap16(rxvq->used->idx); + if (rx_last_idx == rx_used_idx) { return 0; } - len = rxvq->used->ring[rx_last_idx % rxvq->num].len - virtio_net_hdr_size; + rx_used_len = virtio_tswap32(rxvq->used->ring[rx_last_idx % rxvq->num].len); + rx_used_id = virtio_tswap32(rxvq->used->ring[rx_last_idx % rxvq->num].id); + + len = rx_used_len - virtio_net_hdr_size; if (len > maxlen) { puts("virtio-net: Receive buffer too small"); len = maxlen; } - id = rxvq->used->ring[rx_last_idx % rxvq->num].id % rxvq->num; - pkt = (uint8_t *)(rxvq->desc[id].addr + virtio_net_hdr_size); + id = rx_used_id % rxvq->num; + rx_desc_addr = virtio_tswap64(rxvq->desc[id].addr); + pkt = (uint8_t *)(rx_desc_addr + virtio_net_hdr_size); #if DEBUG_VIRTIO_NET /* Dump packet */ int i; - printf("\nbuf %p: len=%i\n", (void *)rxvq->desc[id].addr, len); + printf("\nbuf %p: len=%i\n", (void *)rx_desc_addr, len); for (i = 0; i < 64; i++) { printf(" %02x", pkt[i]); if ((i % 16) == 15) { @@ -150,8 +173,10 @@ int recv(int fd, void *buf, int maxlen, int flags) memcpy(buf, pkt, len); /* Mark buffer as available to the host again */ - rxvq->avail->ring[rxvq->avail->idx % rxvq->num] = id; - rxvq->avail->idx = rxvq->avail->idx + 1; + rx_avail_idx = virtio_tswap16(rxvq->avail->idx); + rxvq->avail->ring[rx_avail_idx % rxvq->num] = virtio_tswap16(id); + rx_avail_idx++; + rxvq->avail->idx = virtio_tswap16(rx_avail_idx); vring_notify(rxvq); /* Move index to next entry */ diff --git a/pc-bios/s390-ccw/virtio-pci.c b/pc-bios/s390-ccw/virtio-pci.c index f501252c81..147a82895f 100644 --- a/pc-bios/s390-ccw/virtio-pci.c +++ b/pc-bios/s390-ccw/virtio-pci.c @@ -52,6 +52,10 @@ void virtio_pci_id2type(VDev *vdev, uint16_t device_id) case 0x1001: vdev->dev_type = VIRTIO_ID_BLOCK; break; + case 0x1041: + case 0x1000: + vdev->dev_type = VIRTIO_ID_NET; + break; default: vdev->dev_type = 0; } @@ -199,6 +203,14 @@ static int virtio_pci_get_blk_config(void) return rc; } +static int virtio_pci_get_net_config(void) +{ + VirtioNetConfig *cfg = &virtio_get_device()->config.net; + int rc = vpci_read_flex(d_cap.off, d_cap.bar, cfg, sizeof(VirtioNetConfig)); + + return rc; +} + static int virtio_pci_negotiate(void) { int i, rc; @@ -330,6 +342,7 @@ bool virtio_pci_is_supported(VDev *vdev) if (vdev->vendor_id == PCI_VENDOR_VIRTIO) { switch (vdev->dev_type) { case VIRTIO_ID_BLOCK: + case VIRTIO_ID_NET: return true; default: return false; @@ -384,6 +397,11 @@ int virtio_pci_setup(VDev *vdev) vdev->cmd_vr_idx = 0; virtio_pci_get_blk_config(); break; + case VIRTIO_ID_NET: + vdev->nr_vqs = 2; + vdev->cmd_vr_idx = 0; + virtio_pci_get_net_config(); + break; default: puts("Unsupported virtio device"); return -ENODEV; -- 2.55.0
