Am 13.10.2026 um 10:32 hat Wangyong geschrieben:
> Hi,
>
> I'm reporting a bug where VPD Page 0xb0 (Block Limits) is incorrectly
> emulated in QEMU's scsi-generic driver, causing guest VMs to fail
> operations like mkfs.xfs.
>
> Summary:
> When using QEMU stale-11.0 with scsi-block passthrough, the Optimal
> Transfer Length (and related fields) in VPD Page 0xb0 are incorrectly
> capped to a much smaller value than what the host device reports. This
> is caused by commit 3cb29058 which modified blk_get_max_transfer() to
> no longer check bs->bl.max_hw_transfer, and the scsi-generic code at
> line 194-198 uses this function to compute VPD fields(Optimal Transfer
> Length).
My git repository doesn't contain a commit 3cb29058. Please specify
where you got your copy of the QEMU code from.
> Environment:
> Host: Linux with multipath + LUN
> Guest: Linux VM with QEMU 11.0 scsi-block passthrough
> Host kernel: 6.6.0
>
> Reproduction Steps:
> Set up a multipath environment with a LUN (physical disk with stripe geometry)
> Pass the LUN through to a QEMU VM using scsi-block:
> -device virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0xa \
> -drive
> file=/dev/disk/by-id/dm-name-36000d310057df8000000000000000969,format=raw,if=none,id=drive-scsi0-0-0-0,cache=none,aio=native
> \
> -device
> scsi-block,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0\
>
> Inside the VM, run mkfs.xfs /dev/sda
>
> Expected Behavior:
> mkfs.xfs should succeed
> VPD Page 0xb0 should report Optimal transfer length matching the host's RAID
> stripe size
>
> Actual Behavior:
> 1. mkfs.xfs fails inside VM
> SB stripe unit sanity check failed
> Metadata corruption detected at 0x...
> xfx_sb block 0x0/0x1000
> libxfs_bwrite: write verifier failed
> SB stripe unit sanity check failed
> AG 0x0 unlinked bucket sanity check failed
> mkfs.xfs: writing AG headers failed, err=117
>
> Note: No error in dmesg because XFS failed during in-memory superblock
> construction, never issuing actual I/O.
>
> mkfs.xfs -f -d su=0.sw=0 /dev/sda
> 2. VPD comparison between host and guest
> Host (sg_vpd -p 0xb0
> /dev/disk/by-id/dm-name-36000d310057df8000000000000000969)
> Block limits VPD page (SBC)
> Write same non-zero (WSNZ): 0
> Maximum compare and write length: 0x1
> Optimal transfer length granularity: 0x1000
> Maximum transfer length: 0 blocks [not reported]
> Optimal transfer length: 0x1000
> Maximum prefetch length: 0 blocks [not reported]
> Maximum unmap LBA count: 0x200000
> Maximum unmap block descriptor count: 0x1
> Optimal unmap granularity: 0x1000
> Unmap granularity alignment valid: true
> Unmap granularity alignment: 0x0
> Maximum write same length: 0 blocks [not reported]
> Maximum atomic transfer length: 0 blocks [not reported]
> Atomic alignment: 0 blocks [unaligned atomic writes permitted]
> Atomic transfer length granularity: 0 blocks [no granularity requirement]
> Maximum atomic transfer length with atomic boundary: 0 blocks [not reported]
> Maximum atomic boundary size: 0 blocks [can only write atomic 1 block]
> [root@cvknode151 ~]# ll
> /dev/disk/by-id/dm-name-36000d310057df8000000000000000969
> lrwxrwxrwx 1 root root 10 Oct 13 15:55
> /dev/disk/by-id/dm-name-36000d310057df8000000000000000969 -> ../../dm-1
> [root@cvknode151 ~]# cat /sys/block/dm-1/queue/max_segments
> 64
> Guest (sg_vpd -p 0xb0 /dev/sda):
> Block limits VPD page (SBC):
> Write same non-zero (WSNZ): 0
> Maximum compare and write length: 1 blocks
> Optimal transfer length granularity: 4096 blocks
> Maximum transfer length: 512 blocks
> Optimal transfer length: 512 blocks ← INCORRECT
> Maximum prefetch transfer length: 0 blocks [ignored]
> Maximum unmap LBA count: 2097152
> Maximum unmap block descriptor count: 1
> Optimal unmap granularity: 4096 blocks
> Unmap granularity alignment valid: true
> Unmap granularity alignment: 0
> Maximum write same length: 0 blocks [not reported]
> Maximum atomic transfer length: 0 blocks [not reported]
> Atomic alignment: 0 [unaligned atomic writes permitted]
> Atomic transfer length granularity: 0 [no granularity requirement
> Maximum atomic transfer length with atomic boundary: 0 blocks [not reported]
> Maximum atomic boundary size: 0 blocks [can only write atomic 1 block]
>
> Restore "opt xfer len" to before modification, mkfs.xfs can pass the test
>
> @@ -169,15 +169,15 @@ static void scsi_handle_inquiry_reply(SCSIGenericReq
> *r, SCSIDevice *s)
> if (page == 0xb0) {
> + uint32_t max_transfer_opt = blk_get_max_transfer(s->conf.blk) /
> s->blocksize;
>
> assert(max_transfer);
> max_transfer = MIN_NON_ZERO(max_transfer, max_iov *
> qemu_real_host_page_size)
> / s->blocksize;
> stl_be_p(&r->buf[8], max_transfer);
> /* Also take care of the opt xfer len. */
> stl_be_p(&r->buf[12],
> - MIN_NON_ZERO(max_transfer, ldl_be_p(&r->buf[12])));
> + MIN_NON_ZERO(max_transfer_opt, ldl_be_p(&r->buf[12])));
> } else if (s->needs_vpd_bl_emulation && page == 0x00 && r->buflen >=
> 4) {
> /*
> * Now we're capable of supplying the VPD Block Limits
Code that roughly looked like this existed in QEMU 7.0 and earlier. You
said you're using QEMU 11.0, so it shouldn't exist in your code.
Kevin
