Last week I have sent V7 of OpenSBI series which is based on V0.9 version of SMMTT(SPDA) spec.
https://patchwork.ozlabs.org/project/opensbi/list/?series=531089 On Mon, Nov 9, 2026 at 1:05 PM LIU Zhiwei <[email protected]> wrote: > > > On 10/30/26 6:45 PM, Rahul Pathak wrote: > > Hi Zhiwei, > > > > The SMMPT spec has been updated following the ARC comments > > and the big change is the merging of both SMSDID and SMMPT > > sub extensions into one with new name "SMSD" which is much better now. > > > > https://github.com/riscv/riscv-smmtt/commit/ff5069fa99fc1fdd97c9fb8d96329e13afa82712 > > > > Can you please update this series. > Hi Rahul and Daniel, > > I see the latest specification is v0.9.0 now. Supporting v0.4.9 is not > necessary. I will update this patch set to v0.9.0 together with updated > test cases. > > Thanks, > Zhiwei > > > > > Thanks > > Rahul > > > > On Sat, Oct 10, 2026 at 12:13 PM LIU Zhiwei > > <[email protected]> wrote: > >> > >> On 10/8/26 10:42 AM, Daniel Henrique Barboza wrote: > >>> Hi Zhiwei, > >>> > >>> > >>> Sorry from taking this long to take a look at this work. I am afraid > >>> I'll > >>> need to ask you to send a v9 due to the following upstream changes, aside > >>> from some review comments I made: > >>> > >>> - upstream changed how tcg tests are invoked (we use meson now), i.e. you > >>> need to add changes in tests/tcg/riscv64/system/meson.build instead of > >>> Makefile.softmmu-target; > >>> > >>> - upstream also changed how we declare things in disas/riscv.c. > >>> > >>> > >>> If you send a v9 I'll prioritize it for review. We can get this done for > >>> 11.2. > >>> > >> Hi Daniel, > >> > >> Thank you for taking the time to review this! No worries about the delay. > >> > >> I appreciate the heads-up on the upstream changes. I will update the > >> patch accordingly: > >> > >> Switch from Makefile.softmmu-target to > >> tests/tcg/riscv64/system/meson.build for the TCG test invocation; > >> Update the declarations in disas/riscv.c to align with the latest > >> upstream changes. > >> I will send out v9 as soon as possible. Really glad to hear we can > >> target 11.2 for this — I'll make sure to prioritize it on my end as well. > >> > >> Thanks again for the review and for keeping this moving! > >> > >> Best regards, > >> Zhiwei > >>> Cheers, > >>> Daniel > >>> > >>> On 7/23/2026 5:03 PM, LIU Zhiwei wrote: > >>>> This patch set introduces support for the RISC-V Smsdid and Smmpt > >>>> (Supervisor Domain Identifier and Memory Protection Table) extensions > >>>> v0.4.9(https://github.com/riscv/riscv-smmtt/releases/tag/v0.4.9). > >>>> Smmpt provides a hardware mechanism for fine-grained memory protection, > >>>> checked after address translation, which is particularly useful for > >>>> supervisor-level sandboxing and security monitoring. > >>>> > >>>> The rfc patch set: > >>>> https://mail.gnu.org/archive/html/qemu-riscv/2025-09/msg00216.html > >>>> > >>>> Rahul Pathak is working on SMMPT OpenSBI support - > >>>> https://lists.infradead.org/pipermail/opensbi/2026-July/010235.html > >>>> > >>>> based on his QEMU SMMPT branch - > >>>> https://github.com/pathakraul/qemu/tree/rpathak_smmpt_v1 > >>>> > >>>> As we all agree - > >>>> https://patchew.org/QEMU/[email protected]/ > >>>> > >>>> , we will collaborate on this work and not duplicate efforts. Rahul will > >>>> focus on OpenSBI upstream and I will update the QEMU patch set to v8. > >>>> > >>>> Xiangyi will review the OpenSBI SMMPT patch set and may collaborate to > >>>> upstream the other parts, such as SMSDIA and IOMPT. > >>>> > >>>> v7->v8: > >>>> 1. Update the mfence.pa and minval.pa instruction encodings to > >>>> match the > >>>> upstream riscv-opcodes definition > >>>> (https://github.com/riscv/riscv-opcodes/pull/389/): mfence.pa > >>>> now uses > >>>> funct7=0b0011001 and minval.pa uses funct7=0b0011011. The > >>>> decoder, > >>>> disassembler and the system test are updated accordingly. > >>>> > >>>> v6->v7: > >>>> The implementation is updated from the v0.3.4 specification to > >>>> v0.4.9. The main changes are: > >>>> 1. Update the mmpt CSR number to 0x382 and msdcfg to 0x74E. > >>>> 2. Update the mmpt register layout: the SDID and PPN field > >>>> positions > >>>> changed and the RV64 PPN is now 44 bits. > >>>> 3. Rework the MPTE format: the N (NAPOT) bit now lives at bit 2, > >>>> the > >>>> non-leaf NAPOT form is removed, NAPOT leaf entries encode a > >>>> single > >>>> XWR tuple plus a G granularity field, and non-NAPOT leaf entries > >>>> hold per-page XWR tuples. > >>>> 4. Treat XWR=000 as "no access" and a non-leaf entry with N=1 as a > >>>> fault. > >>>> 5. Enforce the Smmpt64 root-table PPN alignment (low 3 bits zero). > >>>> 6. Rename the fence instructions mfence.spa/minval.spa to > >>>> mfence.pa/minval.pa. > >>>> 7. Drop stale Reviewed-by tags on the substantially reworked > >>>> patches. > >>>> 8. Introduce the configurable "smmpt-sdidlen" CPU property. > >>>> 9. Add disassembly support for the Smmpt. > >>>> 10. Add bare-metal M-mode system tests. > >>>> 11. Rebase to master. > >>>> > >>>> v5->v6: > >>>> 1. Use explicitly bit fields extract instead of mpte_union_t. > >>>> 2. Use the same exception behavior for MPT valiation as PMP > >>>> valiation. > >>>> 3. Use PAGE_* instead of MPT_ACCESS_* as they have same value. > >>>> 4. Use address_space_*_le instead of address_space_* for SMMPT. > >>>> 5. Only print SMMPT address check log when SMMPT is enabled. > >>>> 6. Add implied rule for SMMPT as it depends on SMSDID. > >>>> 7. Rebase to master. > >>>> > >>>> v4->v5: > >>>> 1. Rebase to master. > >>>> v3->v4: > >>>> 1. Add missing review tags. > >>>> v2->v3: > >>>> 1. Fix build error in patch 2. > >>>> 2. Rebase to master. > >>>> > >>>> rfc->v2: > >>>> 1. When ext_smmpt is false or BARE mode, make other fields in mmpt > >>>> CSR zero. > >>>> 2. Add patch 5 to fix smrnmi ISA string order. > >>>> 3. Fix patch 6 smmpt and smsdid ISA string order. > >>>> 4. Make smmpt and smsdid experiment extensions. > >>>> 5. Add review tags. > >>>> > >>>> LIU Zhiwei (11): > >>>> target/riscv: Add basic definitions and CSRs for SMMPT > >>>> target/riscv: Add smmpt-sdidlen property for the mmpt SDID field > >>>> target/riscv: Implement core SMMPT lookup logic > >>>> target/riscv: Integrate SMMPT checks into MMU and TLB fill > >>>> target/riscv: Implement SMMPT fence instructions > >>>> target/riscv: Fix smrnmi isa alphabetical order > >>>> target/riscv: Add disassembly for Smmpt instructions and CSRs > >>>> target/riscv: Enable SMMPT extension > >>>> target/riscv: Add system test for SMMPT extension > >>>> target/riscv: Add system tests for Smmpt52 and Smmpt64 > >>>> target/riscv: Add system test for Smmpt34 > >>>> > >>>> disas/riscv.c | 9 +- > >>>> target/riscv/cpu.c | 60 +++- > >>>> target/riscv/cpu.h | 8 + > >>>> target/riscv/cpu_bits.h | 27 ++ > >>>> target/riscv/cpu_cfg_fields.h.inc | 3 + > >>>> target/riscv/insn32.decode | 2 + > >>>> target/riscv/meson.build | 1 + > >>>> target/riscv/riscv_smmpt.c | 339 ++++++++++++++++++ > >>>> target/riscv/riscv_smmpt.h | 26 ++ > >>>> target/riscv/tcg/cpu_helper.c | 119 +++++- > >>>> target/riscv/tcg/csr.c | 106 ++++++ > >>>> .../tcg/insn_trans/trans_privileged.c.inc | 30 ++ > >>>> target/riscv/tcg/pmp.h | 3 + > >>>> tests/tcg/riscv64/Makefile.softmmu-target | 12 + > >>>> tests/tcg/riscv64/smmpt-common.S | 257 +++++++++++++ > >>>> tests/tcg/riscv64/test-smmpt.S | 85 +++++ > >>>> tests/tcg/riscv64/test-smmpt34.S | 97 +++++ > >>>> tests/tcg/riscv64/test-smmpt52.S | 91 +++++ > >>>> tests/tcg/riscv64/test-smmpt64.S | 98 +++++ > >>>> 19 files changed, 1354 insertions(+), 19 deletions(-) > >>>> create mode 100644 target/riscv/riscv_smmpt.c > >>>> create mode 100644 target/riscv/riscv_smmpt.h > >>>> create mode 100644 tests/tcg/riscv64/smmpt-common.S > >>>> create mode 100644 tests/tcg/riscv64/test-smmpt.S > >>>> create mode 100644 tests/tcg/riscv64/test-smmpt34.S > >>>> create mode 100644 tests/tcg/riscv64/test-smmpt52.S > >>>> create mode 100644 tests/tcg/riscv64/test-smmpt64.S > >>>> > >>>> > >>>> base-commit: 499039798cdad7d86b787fec0eaf1da4151c0f05
