Removed the explicit SSI mux and wired the CS line directly up to the SSI
devices.
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwa...@petalogix.com>
---
hw/ssd0323.c | 1 +
hw/ssi-sd.c | 1 +
hw/stellaris.c | 98 ++++++++++----------------------------------------------
3 files changed, 19 insertions(+), 81 deletions(-)
diff --git a/hw/ssd0323.c b/hw/ssd0323.c
index db16d20..d8a0c14 100644
--- a/hw/ssd0323.c
+++ b/hw/ssd0323.c
@@ -352,6 +352,7 @@ static void ssd0323_class_init(ObjectClass *klass, void
*data)
k->init = ssd0323_init;
k->transfer = ssd0323_transfer;
+ k->cs_polarity = SSI_CS_HIGH;
}
static TypeInfo ssd0323_info = {
diff --git a/hw/ssi-sd.c b/hw/ssi-sd.c
index 6fd9ab9..1b1f625 100644
--- a/hw/ssi-sd.c
+++ b/hw/ssi-sd.c
@@ -256,6 +256,7 @@ static void ssi_sd_class_init(ObjectClass *klass, void
*data)
k->init = ssi_sd_init;
k->transfer = ssi_sd_transfer;
+ k->cs_polarity = SSI_CS_LOW;
}
static TypeInfo ssi_sd_info = {
diff --git a/hw/stellaris.c b/hw/stellaris.c
index ec55c0e..acb297b 100644
--- a/hw/stellaris.c
+++ b/hw/stellaris.c
@@ -1154,58 +1154,6 @@ static int stellaris_adc_init(SysBusDevice *dev)
return 0;
}
-/* Some boards have both an OLED controller and SD card connected to
- the same SSI port, with the SD card chip select connected to a
- GPIO pin. Technically the OLED chip select is connected to the SSI
- Fss pin. We do not bother emulating that as both devices should
- never be selected simultaneously, and our OLED controller ignores stray
- 0xff commands that occur when deselecting the SD card. */
-
-typedef struct {
- SSISlave ssidev;
- qemu_irq irq;
- int current_dev;
- SSIBus *bus[2];
-} stellaris_ssi_bus_state;
-
-static void stellaris_ssi_bus_select(void *opaque, int irq, int level)
-{
- stellaris_ssi_bus_state *s = (stellaris_ssi_bus_state *)opaque;
-
- s->current_dev = level;
-}
-
-static uint32_t stellaris_ssi_bus_transfer(SSISlave *dev, uint32_t val)
-{
- stellaris_ssi_bus_state *s = FROM_SSI_SLAVE(stellaris_ssi_bus_state, dev);
-
- return ssi_transfer(s->bus[s->current_dev], val);
-}
-
-static const VMStateDescription vmstate_stellaris_ssi_bus = {
- .name = "stellaris_ssi_bus",
- .version_id = 1,
- .minimum_version_id = 1,
- .minimum_version_id_old = 1,
- .fields = (VMStateField[]) {
- VMSTATE_SSI_SLAVE(ssidev, stellaris_ssi_bus_state),
- VMSTATE_INT32(current_dev, stellaris_ssi_bus_state),
- VMSTATE_END_OF_LIST()
- }
-};
-
-static int stellaris_ssi_bus_init(SSISlave *dev)
-{
- stellaris_ssi_bus_state *s = FROM_SSI_SLAVE(stellaris_ssi_bus_state, dev);
-
- s->bus[0] = ssi_create_bus(&dev->qdev, "ssi0");
- s->bus[1] = ssi_create_bus(&dev->qdev, "ssi1");
- qdev_init_gpio_in(&dev->qdev, stellaris_ssi_bus_select, 1);
-
- vmstate_register(&dev->qdev, -1, &vmstate_stellaris_ssi_bus, s);
- return 0;
-}
-
/* Board init. */
static stellaris_board_info stellaris_boards[] = {
{ "LM3S811EVB",
@@ -1306,29 +1254,33 @@ static void stellaris_init(const char *kernel_filename,
const char *cpu_model,
if (board->dc2 & (1 << 4)) {
dev = sysbus_create_simple("pl022", 0x40008000, pic[7]);
if (board->peripherals & BP_OLED_SSI) {
- DeviceState *mux;
void *bus;
- qemu_irq select_pin;
+ /* Some boards have both an OLED controller and SD card connected
to
+ * the same SSI port, with the SD card chip select connected to a
+ * GPIO pin. Technically the OLED chip select is connected to the
+ * SSI Fss pin. We do not bother emulating that as both devices
+ * should never be selected simultaneously, and our OLED controller
+ * ignores stray 0xff commands that occur when deselecting the SD
+ * card.
+ */
bus = qdev_get_child_bus(dev, "ssi");
- mux = ssi_create_slave(bus, "evb6965-ssi");
- select_pin = qdev_get_gpio_in(mux, 0);
+
+ dev = ssi_create_slave(bus, "ssi-sd");
if (gpio_dev[GPIO_D]) {
- qdev_connect_gpio_out(gpio_dev[GPIO_D], 0, select_pin);
+ qdev_connect_gpio_out(gpio_dev[GPIO_D], 0,
+ qdev_get_gpio_in(dev, 0));
}
- bus = qdev_get_child_bus(mux, "ssi0");
- ssi_create_slave(bus, "ssi-sd");
-
- bus = qdev_get_child_bus(mux, "ssi1");
dev = ssi_create_slave(bus, "ssd0323");
+ if (gpio_dev[GPIO_D]) {
+ qdev_connect_gpio_out(gpio_dev[GPIO_D], 0,
+ qdev_get_gpio_in(dev, 0));
+ }
if (gpio_dev[GPIO_C]) {
qdev_connect_gpio_out(gpio_dev[GPIO_C], 7,
- qdev_get_gpio_in(dev, 0));
+ qdev_get_gpio_in(dev, 1));
}
-
- /* Make sure the select pin is high. */
- qemu_irq_raise(select_pin);
}
}
if (board->dc4 & (1 << 28)) {
@@ -1393,21 +1345,6 @@ static void stellaris_machine_init(void)
machine_init(stellaris_machine_init);
-static void stellaris_ssi_bus_class_init(ObjectClass *klass, void *data)
-{
- SSISlaveClass *k = SSI_SLAVE_CLASS(klass);
-
- k->init = stellaris_ssi_bus_init;
- k->transfer = stellaris_ssi_bus_transfer;
-}
-
-static TypeInfo stellaris_ssi_bus_info = {
- .name = "evb6965-ssi",
- .parent = TYPE_SSI_SLAVE,
- .instance_size = sizeof(stellaris_ssi_bus_state),
- .class_init = stellaris_ssi_bus_class_init,
-};
-
static void stellaris_i2c_class_init(ObjectClass *klass, void *data)
{
SysBusDeviceClass *sdc = SYS_BUS_DEVICE_CLASS(klass);
@@ -1455,7 +1392,6 @@ static void stellaris_register_types(void)
type_register_static(&stellaris_i2c_info);
type_register_static(&stellaris_gptm_info);
type_register_static(&stellaris_adc_info);
- type_register_static(&stellaris_ssi_bus_info);
}
type_init(stellaris_register_types)
--
1.7.0.4
