These are normally ifdefed out and don't matter.  But if you enable
them, they ought to be correct.

Signed-off-by: Matthew Ogilvie <mmogilvi_q...@miniinfo.net>
---

This version of the patch adds i8259.c.

An alternative approach might be to eliminate these printf's,
and/or replace them with trace*() calls, but until someone gets
around to doing so...

 hw/cirrus_vga.c | 4 ++--
 hw/i8259.c      | 3 ++-
 hw/ide/cmd646.c | 5 +++--
 hw/ide/via.c    | 5 +++--
 4 files changed, 10 insertions(+), 7 deletions(-)

diff --git a/hw/cirrus_vga.c b/hw/cirrus_vga.c
index e8dcc6b..909899d 100644
--- a/hw/cirrus_vga.c
+++ b/hw/cirrus_vga.c
@@ -2055,8 +2055,8 @@ static void cirrus_vga_mem_write(void *opaque,
        }
     } else {
 #ifdef DEBUG_CIRRUS
-        printf("cirrus: mem_writeb " TARGET_FMT_plx " value %02x\n", addr,
-               mem_value);
+        printf("cirrus: mem_writeb " TARGET_FMT_plx " value %" PRIx64 "\n",
+               addr, mem_value);
 #endif
     }
 }
diff --git a/hw/i8259.c b/hw/i8259.c
index 53daf78..6587666 100644
--- a/hw/i8259.c
+++ b/hw/i8259.c
@@ -355,7 +355,8 @@ static uint64_t pic_ioport_read(void *opaque, 
target_phys_addr_t addr,
             ret = s->imr;
         }
     }
-    DPRINTF("read: addr=0x%02x val=0x%02x\n", addr, ret);
+    DPRINTF("read: addr=0x%02" TARGET_PRIxPHYS " val=0x%02x\n",
+            addr, ret);
     return ret;
 }
 
diff --git a/hw/ide/cmd646.c b/hw/ide/cmd646.c
index e0b9443..dd2855e 100644
--- a/hw/ide/cmd646.c
+++ b/hw/ide/cmd646.c
@@ -154,7 +154,7 @@ static uint64_t bmdma_read(void *opaque, target_phys_addr_t 
addr,
         break;
     }
 #ifdef DEBUG_IDE
-    printf("bmdma: readb 0x%02x : 0x%02x\n", addr, val);
+    printf("bmdma: readb 0x%02" TARGET_PRIxPHYS " : 0x%02x\n", addr, val);
 #endif
     return val;
 }
@@ -170,7 +170,8 @@ static void bmdma_write(void *opaque, target_phys_addr_t 
addr,
     }
 
 #ifdef DEBUG_IDE
-    printf("bmdma: writeb 0x%02x : 0x%02x\n", addr, val);
+    printf("bmdma: writeb 0x%02" TARGET_PRIxPHYS " : 0x%02" PRIx64 "\n",
+           addr, val);
 #endif
     switch(addr & 3) {
     case 0:
diff --git a/hw/ide/via.c b/hw/ide/via.c
index b20e4f0..948a469 100644
--- a/hw/ide/via.c
+++ b/hw/ide/via.c
@@ -55,7 +55,7 @@ static uint64_t bmdma_read(void *opaque, target_phys_addr_t 
addr,
         break;
     }
 #ifdef DEBUG_IDE
-    printf("bmdma: readb 0x%02x : 0x%02x\n", addr, val);
+    printf("bmdma: readb 0x%02" TARGET_PRIxPHYS " : 0x%02x\n", addr, val);
 #endif
     return val;
 }
@@ -70,7 +70,8 @@ static void bmdma_write(void *opaque, target_phys_addr_t addr,
     }
 
 #ifdef DEBUG_IDE
-    printf("bmdma: writeb 0x%02x : 0x%02x\n", addr, val);
+    printf("bmdma: writeb 0x%02" TARGET_PRIxPHYS " : 0x%02" PRIx64 "\n",
+           addr, val);
 #endif
     switch (addr & 3) {
     case 0:
-- 
1.7.10.2.484.gcd07cc5


Reply via email to