On Wed, Sep 26, 2012 at 12:14 PM, Gerd Hoffmann <kra...@redhat.com> wrote: > Signed-off-by: Gerd Hoffmann <kra...@redhat.com> > --- > docs/qemupciserial.inf | 107 > ++++++++++++++++++++++++++++++++++++++++++++++++ > 1 files changed, 107 insertions(+), 0 deletions(-) > create mode 100644 docs/qemupciserial.inf > > diff --git a/docs/qemupciserial.inf b/docs/qemupciserial.inf > new file mode 100644 > index 0000000..905a929 > --- /dev/null > +++ b/docs/qemupciserial.inf > @@ -0,0 +1,107 @@ > +; qemupciserial.inf for qemu, based on MSPORTS.INF
QEMU > + > +; The driver itself is shipped with windows (serial.sys). This is Windows > +; just a inf file to tell windows which pci id the serial pci card > +; emulated by qemu has, and to apply a name tag to it which windows > +; will show in the device manager. > + > +; Installing the driver: Go to device manager. You should find a "pci > +; serial card" tagged with a yellow question mark. Open properties. > +; Pick "update driver". Then "select driver manually". Pick "Ports > +; (Com+Lpt)" from the list. Click "Have a disk". Select this file. > +; Procedure may vary a bit depending on the windows version. > + > +[Version] > +Signature="$CHICAGO$" > +Class=Ports > +ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318} > +Provider=%QEMU% > +DriverVer=09/24/2012,1.3.0 > + > +[SourceDisksNames] > +3426=windows cd > + > +[SourceDisksFiles] > +serial.sys = 3426 > +serenum.sys = 3426 > + > +[DestinationDirs] > +DefaultDestDir = 11 ;LDID_SYS > +ComPort.NT.Copy = 12 ;DIRID_DRIVERS > +SerialEnumerator.NT.Copy=12 ;DIRID_DRIVERS > + > +; Drivers > +;---------------------------------------------------------- > +[Manufacturer] > +%QEMU%=QEMU,NTx86 > + > +[QEMU.NTx86] > +%QEMU-PCI_SERIAL.DeviceDesc% = ComPort, "PCI\VEN_1b36&DEV_0002&CC_0700" > + > +; COM sections > +;---------------------------------------------------------- > +[ComPort.AddReg] > +HKR,,PortSubClass,1,01 > + > +[ComPort.NT] > +AddReg=ComPort.AddReg, ComPort.NT.AddReg > +LogConfig=caa > +SyssetupPnPFlags = 1 > + > +[ComPort.NT.HW] > +AddReg=ComPort.NT.HW.AddReg > + > +[ComPort.NT.AddReg] > +HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider" > + > +[ComPort.NT.HW.AddReg] > +HKR,,"UpperFilters",0x00010000,"serenum" > + > +;-------------- Service installation > +; Port Driver (function driver for this device) > +[ComPort.NT.Services] > +AddService = Serial, 0x00000002, Serial_Service_Inst, Serial_EventLog_Inst > +AddService = Serenum,,Serenum_Service_Inst > + > +; -------------- Serial Port Driver install sections > +[Serial_Service_Inst] > +DisplayName = %Serial.SVCDESC% > +ServiceType = 1 ; SERVICE_KERNEL_DRIVER > +StartType = 1 ; SERVICE_SYSTEM_START (this driver may do > detection) > +ErrorControl = 0 ; SERVICE_ERROR_IGNORE > +ServiceBinary = %12%\serial.sys > +LoadOrderGroup = Extended base > + > +; -------------- Serenum Driver install section > +[Serenum_Service_Inst] > +DisplayName = %Serenum.SVCDESC% > +ServiceType = 1 ; SERVICE_KERNEL_DRIVER > +StartType = 3 ; SERVICE_DEMAND_START > +ErrorControl = 1 ; SERVICE_ERROR_NORMAL > +ServiceBinary = %12%\serenum.sys > +LoadOrderGroup = PNP Filter > + > +[Serial_EventLog_Inst] > +AddReg = Serial_EventLog_AddReg > + > +[Serial_EventLog_AddReg] > +HKR,,EventMessageFile,0x00020000,"%%SystemRoot%%\System32\IoLogMsg.dll;%%SystemRoot%%\System32\drivers\serial.sys" > +HKR,,TypesSupported,0x00010001,7 > + > +; The following sections are COM port resource configs. > +; Section name format means: > +; Char 1 = c (COM port) > +; Char 2 = I/O config: 1 (3f8), 2 (2f8), 3 (3e8), 4 (2e8), a (any) > +; Char 3 = IRQ config: #, a (any) > + > +[caa] ; Any base, any IRQ > +ConfigPriority=HARDRECONFIG > +IOConfig=8@100-ffff%fff8(3ff::) > +IRQConfig=S:3,4,5,7,9,10,11,12,14,15 > + > +[Strings] > +QEMU="QEMU" > +QEMU-PCI_SERIAL.DeviceDesc="QEMU Serial PCI Card" > + > +Serial.SVCDESC = "Serial port driver" > +Serenum.SVCDESC = "Serenum Filter Driver" > -- > 1.7.1 > >