On 05/23/2013 09:19 AM, Paolo Bonzini wrote:
Il 23/05/2013 18:11, Badari Pulavarty ha scritto:
On 05/23/2013 08:30 AM, Paolo Bonzini wrote:
Il 23/05/2013 17:27, Asias He ha scritto:
On Thu, May 23, 2013 at 04:58:05PM +0200, Paolo Bonzini wrote:
Il 23/05/2013 16:48, Badari Pulavarty ha scritto:
The common virtio-scsi code in QEMU should guard against this. In
virtio-blk data plane I hit a similar case and ended up starting the
data plane thread (equivalent to vhost here) *before* the status
register is set to DRIVER_OK.
Thats exactly what my debug in vhost_scsi_set_status() shows.
set status started 0 val 0
set status started 0 val 0
set status started 0 val 0
set status started 0 val 0
set status started 0 val 0
set status started 0 val 3
Program received signal SIGSEGV, Segmentation fault.
We never got a chance to call vhost_scsi_start() as we are waiting
for DRIVER_OK.
Reproduced the SIGSEGV and verified that replacing the bios.bin with the
one from seabios.git makes the guest boot.
This should fix it:
diff --git a/hw/scsi/virtio-scsi.c b/hw/scsi/virtio-scsi.c
index 08dd3f3..3139355 100644
--- a/hw/scsi/virtio-scsi.c
+++ b/hw/scsi/virtio-scsi.c
@@ -266,7 +266,7 @@ fail:
static void virtio_scsi_handle_ctrl(VirtIODevice *vdev, VirtQueue *vq)
{
- VirtIOSCSI *s = (VirtIOSCSI *)vdev;
+ VirtIOSCSI *s = VIRTIO_SCSI(vdev);
VirtIOSCSIReq *req;
while ((req = virtio_scsi_pop_req(s, vq))) {
@@ -347,9 +347,8 @@ static void virtio_scsi_fail_cmd_req(VirtIOSCSIReq
*req)
static void virtio_scsi_handle_cmd(VirtIODevice *vdev, VirtQueue *vq)
{
- /* use non-QOM casts in the data path */
- VirtIOSCSI *s = (VirtIOSCSI *)vdev;
- VirtIOSCSICommon *vs = &s->parent_obj;
+ VirtIOSCSI *s = VIRTIO_SCSI(vdev);
+ VirtIOSCSICommon *vs = VIRTIO_SCSI_COMMON(vdev);
VirtIOSCSIReq *req;
int n;
Paolo
Hmm.. Not quite..
If that is with the old SeaBIOS, then SIGABRT is intended. :) The guest
is buggy, the problem in QEMU only lies in _how_ it fails.
Paolo
I am confused now. Without above changes, seabios fix makes the
guest boot. But with the above changes, I run into this (even with
seabios fix)
(gdb) run -L /root/bios2 -cpu qemu64 --enable-kvm -m 4096 -drive
file=/var/lib/libvirt/images/lnx.img,if=ide,cache=writethrough -device
vhost-scsi-pci,wwpn=naa.6001405bd4e8476d,event_idx=off -vnc :10 -boot d
Starting program: /root/qemu/x86_64-softmmu/qemu-system-x86_64 -L
/root/bios2 -cpu qemu64 --enable-kvm -m 4096 -drive
file=/var/lib/libvirt/images/lnx.img,if=ide,cache=writethrough -device
vhost-scsi-pci,wwpn=naa.6001405bd4e8476d,event_idx=off -vnc :10 -boot d
warning: no loadable sections found in added symbol-file system-supplied
DSO at 0x7ffff7ffa000
[Thread debugging using libthread_db enabled]
[New Thread 0x7ffff1c1c700 (LWP 3299)]
[New Thread 0x7ffff1239700 (LWP 3300)]
[New Thread 0x7fffeb7ff700 (LWP 3303)]
set status started 0 val 0
set status started 0 val 0
set status started 0 val 0
set status started 0 val 0
set status started 0 val 0
set status started 0 val 3
set status started 0 val 7
set status started 1 val 0
/root/qemu/hw/scsi/virtio-scsi.c:356:virtio_scsi_handle_cmd: Object
0x55555659d918 is not an instance of type virtio-scsi-device
Program received signal SIGABRT, Aborted.
[Switching to Thread 0x7ffff1239700 (LWP 3300)]
0x00007ffff5cf18a5 in raise () from /lib64/libc.so.6
Missing separate debuginfos, use: debuginfo-install
cyrus-sasl-gssapi-2.1.23-13.el6_3.1.x86_64
cyrus-sasl-lib-2.1.23-13.el6_3.1.x86_64
cyrus-sasl-md5-2.1.23-13.el6_3.1.x86_64
cyrus-sasl-plain-2.1.23-13.el6_3.1.x86_64 db4-4.7.25-17.el6.x86_64
glib2-2.22.5-7.el6.x86_64 glibc-2.12-1.107.el6.x86_64
gnutls-2.8.5-10.el6.x86_64 keyutils-libs-1.4-4.el6.x86_64
krb5-libs-1.10.3-10.el6.x86_64 libcom_err-1.41.12-14.el6.x86_64
libcurl-7.19.7-35.el6.x86_64 libgcrypt-1.4.5-9.el6_2.2.x86_64
libgpg-error-1.7-4.el6.x86_64 libidn-1.18-2.el6.x86_64
libpng-1.2.49-1.el6_2.x86_64 libselinux-2.0.94-5.3.el6.x86_64
libssh2-1.4.2-1.el6.x86_64 libtasn1-2.3-3.el6_2.1.x86_64
ncurses-libs-5.7-3.20090208.el6.x86_64 nspr-4.9.2-1.el6.x86_64
nss-3.14.0.0-12.el6.x86_64 nss-softokn-freebl-3.12.9-11.el6.x86_64
nss-util-3.14.0.0-2.el6.x86_64 openldap-2.4.23-31.el6.x86_64
openssl-1.0.0-27.el6.x86_64 pixman-0.26.2-4.el6.x86_64
zlib-1.2.3-29.el6.x86_64
(gdb) bt
#0 0x00007ffff5cf18a5 in raise () from /lib64/libc.so.6
#1 0x00007ffff5cf3085 in abort () from /lib64/libc.so.6
#2 0x00005555557230d0 in object_dynamic_cast_assert
(obj=0x55555659d918, typename=0x5555558a56e5 "virtio-scsi-device",
file=0x5555558bda30 "/root/qemu/hw/scsi/virtio-scsi.c", line=356,
func=<value optimized out>) at qom/object.c:456
#3 0x00005555557a5ef1 in virtio_scsi_handle_cmd (vdev=0x55555659d918,
vq=0x5555565929d0) at /root/qemu/hw/scsi/virtio-scsi.c:356
#4 0x00005555556e467d in virtio_pci_set_host_notifier_internal
(proxy=0x55555659d120, n=2, assign=false, set_handler=false) at
hw/virtio/virtio-pci.c:200
#5 0x00005555557a9663 in vhost_dev_disable_notifiers
(hdev=0x55555659da38, vdev=<value optimized out>) at
/root/qemu/hw/virtio/vhost.c:955
#6 0x00005555557a48a1 in vhost_scsi_stop (vdev=0x55555659d918,
val=<value optimized out>) at /root/qemu/hw/scsi/vhost-scsi.c:136
#7 vhost_scsi_set_status (vdev=0x55555659d918, val=<value optimized
out>) at /root/qemu/hw/scsi/vhost-scsi.c:198
#8 0x00005555557acb97 in virtio_set_status (vdev=0x55555659d918, val=0
'\000') at /root/qemu/hw/virtio/virtio.c:529
#9 0x00005555556e50d6 in virtio_ioport_write (opaque=0x55555659d120,
addr=<value optimized out>, val=<value optimized out>, size=<value
optimized out>) at hw/virtio/virtio-pci.c:300
#10 virtio_pci_config_write (opaque=0x55555659d120, addr=<value
optimized out>, val=<value optimized out>, size=<value optimized out>)
at hw/virtio/virtio-pci.c:422
#11 0x00005555557b3a60 in access_with_adjusted_size (addr=18,
value=0x7ffff1238b78, size=1, access_size_min=<value optimized out>,
access_size_max=<value optimized out>, access=
0x5555557b51d0 <memory_region_write_accessor>,
opaque=0x55555659d7d0) at /root/qemu/memory.c:364
#12 0x00005555557b408b in memory_region_iorange_write (iorange=<value
optimized out>, offset=<value optimized out>, width=<value optimized
out>, data=0) at /root/qemu/memory.c:439
#13 0x00005555557b2e61 in kvm_handle_io (env=0x555556521af0) at
/root/qemu/kvm-all.c:1482
#14 kvm_cpu_exec (env=0x555556521af0) at /root/qemu/kvm-all.c:1634
#15 0x000055555576148e in qemu_kvm_cpu_thread_fn (arg=0x555556521af0) at
/root/qemu/cpus.c:759
#16 0x00007ffff6059851 in start_thread () from /lib64/libpthread.so.0
#17 0x00007ffff5da790d in clone () from /lib64/libc.so.6
