ping http://patchwork.ozlabs.org/patch/251250/ http://patchwork.ozlabs.org/patch/251254/ http://patchwork.ozlabs.org/patch/251253/ http://patchwork.ozlabs.org/patch/251251/ http://patchwork.ozlabs.org/patch/251252/ http://patchwork.ozlabs.org/patch/251249/
On 14/06/13 08:30, Leon Alrae wrote: > From: Paul Burton <paul.bur...@imgtec.com> > > This patchset fixes some bugs with MIPS malta emulation allowing the YAMON > firmware to run. > > YAMON can be found at http://www.mips.com/products/system-software/yamon/ > > You can then boot to a YAMON prompt by passing the path to yamon-XX.bin to > the -bios argument or by writing yamon-XX.bin to the start of a flash image > passed to the -pflash argument. The YAMON 2.21 release & newer have been > tested > to work. > > There is still a bug preventing YAMON from initialising the ethernet > controller > so an application or kernel cannot be loaded via TFTP. However the serial > console functions and can examine or modify memory, modify the flash and > environment variables, access disks etc. > > As of YAMON 2.22 a YAMON bug prevents the environment from being initialized > correctly by an "erase -e" command if you begin with a zeroed flash image. As > a workaround you can fill empty areas of your flash image with 1s be > generating > your flash image like so: > > dd if=/dev/zero bs=1M count=4 | tr '\0' '\377' >flash.bin > dd if=yamon-02.22.bin of=flash.bin conv=notrunc > > Paul Burton (6): > mips_malta: fix BIOS endianness swapping > mips_malta: correct reading MIPS revision at 0x1fc00010 > mips_malta: generate SPD EEPROM data at runtime > mips_malta: cap BIOS endian swap length at 0x3e0000 bytes > mips_malta: generate SMBUS EEPROM data > pflash_cfi01: duplicate status byte from bits 23:16 for 32bit reads > > hw/block/pflash_cfi01.c | 3 + > hw/mips/mips_malta.c | 219 > +++++++++++++++++++++++++++++++++++------------ > 2 files changed, 166 insertions(+), 56 deletions(-) >
