On Thu, Jan 09, 2014 at 03:42:22PM -0700, Alex Williamson wrote:
> On Thu, 2014-01-09 at 23:56 +0200, Michael S. Tsirkin wrote:
> > On Thu, Jan 09, 2014 at 12:03:26PM -0700, Alex Williamson wrote:
> > > On Thu, 2014-01-09 at 11:47 -0700, Alex Williamson wrote:
> > > > On Thu, 2014-01-09 at 20:00 +0200, Michael S. Tsirkin wrote:
> > > > > On Thu, Jan 09, 2014 at 10:24:47AM -0700, Alex Williamson wrote:
> > > > > > On Wed, 2013-12-11 at 20:30 +0200, Michael S. Tsirkin wrote:
> > > > > > > From: Paolo Bonzini <pbonz...@redhat.com>
> > > > > > >
> > > > > > > As an alternative to commit 818f86b (exec: limit system memory
> > > > > > > size, 2013-11-04) let's just make all address spaces 64-bit wide.
> > > > > > > This eliminates problems with phys_page_find ignoring bits above
> > > > > > > TARGET_PHYS_ADDR_SPACE_BITS and address_space_translate_internal
> > > > > > > consequently messing up the computations.
> > > > > > >
> > > > > > > In Luiz's reported crash, at startup gdb attempts to read from
> > > > > > > address
> > > > > > > 0xffffffffffffffe6 to 0xffffffffffffffff inclusive. The region
> > > > > > > it gets
> > > > > > > is the newly introduced master abort region, which is as big as
> > > > > > > the PCI
> > > > > > > address space (see pci_bus_init). Due to a typo that's only
> > > > > > > 2^63-1,
> > > > > > > not 2^64. But we get it anyway because phys_page_find ignores
> > > > > > > the upper
> > > > > > > bits of the physical address. In
> > > > > > > address_space_translate_internal then
> > > > > > >
> > > > > > > diff = int128_sub(section->mr->size, int128_make64(addr));
> > > > > > > *plen = int128_get64(int128_min(diff, int128_make64(*plen)));
> > > > > > >
> > > > > > > diff becomes negative, and int128_get64 booms.
> > > > > > >
> > > > > > > The size of the PCI address space region should be fixed anyway.
> > > > > > >
> > > > > > > Reported-by: Luiz Capitulino <lcapitul...@redhat.com>
> > > > > > > Signed-off-by: Paolo Bonzini <pbonz...@redhat.com>
> > > > > > > Signed-off-by: Michael S. Tsirkin <m...@redhat.com>
> > > > > > > ---
> > > > > > > exec.c | 8 ++------
> > > > > > > 1 file changed, 2 insertions(+), 6 deletions(-)
> > > > > > >
> > > > > > > diff --git a/exec.c b/exec.c
> > > > > > > index 7e5ce93..f907f5f 100644
> > > > > > > --- a/exec.c
> > > > > > > +++ b/exec.c
> > > > > > > @@ -94,7 +94,7 @@ struct PhysPageEntry {
> > > > > > > #define PHYS_MAP_NODE_NIL (((uint32_t)~0) >> 6)
> > > > > > >
> > > > > > > /* Size of the L2 (and L3, etc) page tables. */
> > > > > > > -#define ADDR_SPACE_BITS TARGET_PHYS_ADDR_SPACE_BITS
> > > > > > > +#define ADDR_SPACE_BITS 64
> > > > > > >
> > > > > > > #define P_L2_BITS 10
> > > > > > > #define P_L2_SIZE (1 << P_L2_BITS)
> > > > > > > @@ -1861,11 +1861,7 @@ static void memory_map_init(void)
> > > > > > > {
> > > > > > > system_memory = g_malloc(sizeof(*system_memory));
> > > > > > >
> > > > > > > - assert(ADDR_SPACE_BITS <= 64);
> > > > > > > -
> > > > > > > - memory_region_init(system_memory, NULL, "system",
> > > > > > > - ADDR_SPACE_BITS == 64 ?
> > > > > > > - UINT64_MAX : (0x1ULL << ADDR_SPACE_BITS));
> > > > > > > + memory_region_init(system_memory, NULL, "system",
> > > > > > > UINT64_MAX);
> > > > > > > address_space_init(&address_space_memory, system_memory,
> > > > > > > "memory");
> > > > > > >
> > > > > > > system_io = g_malloc(sizeof(*system_io));
> > > > > >
> > > > > > This seems to have some unexpected consequences around sizing 64bit
> > > > > > PCI
> > > > > > BARs that I'm not sure how to handle.
> > > > >
> > > > > BARs are often disabled during sizing. Maybe you
> > > > > don't detect BAR being disabled?
> > > >
> > > > See the trace below, the BARs are not disabled. QEMU pci-core is doing
> > > > the sizing an memory region updates for the BARs, vfio is just a
> > > > pass-through here.
> > >
> > > Sorry, not in the trace below, but yes the sizing seems to be happening
> > > while I/O & memory are enabled int he command register. Thanks,
> > >
> > > Alex
> >
> > OK then from QEMU POV this BAR value is not special at all.
>
> Unfortunately
>
> > > > > > After this patch I get vfio
> > > > > > traces like this:
> > > > > >
> > > > > > vfio: vfio_pci_read_config(0000:01:10.0, @0x10, len=0x4) febe0004
> > > > > > (save lower 32bits of BAR)
> > > > > > vfio: vfio_pci_write_config(0000:01:10.0, @0x10, 0xffffffff,
> > > > > > len=0x4)
> > > > > > (write mask to BAR)
> > > > > > vfio: region_del febe0000 - febe3fff
> > > > > > (memory region gets unmapped)
> > > > > > vfio: vfio_pci_read_config(0000:01:10.0, @0x10, len=0x4) ffffc004
> > > > > > (read size mask)
> > > > > > vfio: vfio_pci_write_config(0000:01:10.0, @0x10, 0xfebe0004,
> > > > > > len=0x4)
> > > > > > (restore BAR)
> > > > > > vfio: region_add febe0000 - febe3fff [0x7fcf3654d000]
> > > > > > (memory region re-mapped)
> > > > > > vfio: vfio_pci_read_config(0000:01:10.0, @0x14, len=0x4) 0
> > > > > > (save upper 32bits of BAR)
> > > > > > vfio: vfio_pci_write_config(0000:01:10.0, @0x14, 0xffffffff,
> > > > > > len=0x4)
> > > > > > (write mask to BAR)
> > > > > > vfio: region_del febe0000 - febe3fff
> > > > > > (memory region gets unmapped)
> > > > > > vfio: region_add fffffffffebe0000 - fffffffffebe3fff
> > > > > > [0x7fcf3654d000]
> > > > > > (memory region gets re-mapped with new address)
> > > > > > qemu-system-x86_64: vfio_dma_map(0x7fcf38861710,
> > > > > > 0xfffffffffebe0000, 0x4000, 0x7fcf3654d000) = -14 (Bad address)
> > > > > > (iommu barfs because it can only handle 48bit physical addresses)
> > > > > >
> > > > >
> > > > > Why are you trying to program BAR addresses for dma in the iommu?
> > > >
> > > > Two reasons, first I can't tell the difference between RAM and MMIO.
> >
> > Why can't you? Generally memory core let you find out easily.
>
> My MemoryListener is setup for &address_space_memory and I then filter
> out anything that's not memory_region_is_ram(). This still gets
> through, so how do I easily find out?
>
> > But in this case it's vfio device itself that is sized so for sure you
> > know it's MMIO.
>
> How so? I have a MemoryListener as described above and pass everything
> through to the IOMMU. I suppose I could look through all the
> VFIODevices and check if the MemoryRegion matches, but that seems really
> ugly.
>
> > Maybe you will have same issue if there's another device with a 64 bit
> > bar though, like ivshmem?
>
> Perhaps, I suspect I'll see anything that registers their BAR
> MemoryRegion from memory_region_init_ram or memory_region_init_ram_ptr.
Must be a 64 bit BAR to trigger the issue though.
> > > > Second, it enables peer-to-peer DMA between devices, which is something
> > > > that we might be able to take advantage of with GPU passthrough.
> > > >
> > > > > > Prior to this change, there was no re-map with the fffffffffebe0000
> > > > > > address, presumably because it was beyond the address space of the
> > > > > > PCI
> > > > > > window. This address is clearly not in a PCI MMIO space, so why
> > > > > > are we
> > > > > > allowing it to be realized in the system address space at this
> > > > > > location?
> > > > > > Thanks,
> > > > > >
> > > > > > Alex
> > > > >
> > > > > Why do you think it is not in PCI MMIO space?
> > > > > True, CPU can't access this address but other pci devices can.
> > > >
> > > > What happens on real hardware when an address like this is programmed to
> > > > a device? The CPU doesn't have the physical bits to access it. I have
> > > > serious doubts that another PCI device would be able to access it
> > > > either. Maybe in some limited scenario where the devices are on the
> > > > same conventional PCI bus. In the typical case, PCI addresses are
> > > > always limited by some kind of aperture, whether that's explicit in
> > > > bridge windows or implicit in hardware design (and perhaps made explicit
> > > > in ACPI). Even if I wanted to filter these out as noise in vfio, how
> > > > would I do it in a way that still allows real 64bit MMIO to be
> > > > programmed. PCI has this knowledge, I hope. VFIO doesn't. Thanks,
> > > >
> > > > Alex
> > >
> >
> > AFAIK PCI doesn't have that knowledge as such. PCI spec is explicit that
> > full 64 bit addresses must be allowed and hardware validation
> > test suites normally check that it actually does work
> > if it happens.
>
> Sure, PCI devices themselves, but the chipset typically has defined
> routing, that's more what I'm referring to. There are generally only
> fixed address windows for RAM vs MMIO.
The physical chipset? Likely - in the presence of IOMMU.
Without that, devices can talk to each other without going
through chipset, and bridge spec is very explicit that
full 64 bit addressing must be supported.
So as long as we don't emulate an IOMMU,
guest will normally think it's okay to use any address.
> > Yes, if there's a bridge somewhere on the path that bridge's
> > windows would protect you, but pci already does this filtering:
> > if you see this address in the memory map this means
> > your virtual device is on root bus.
> >
> > So I think it's the other way around: if VFIO requires specific
> > address ranges to be assigned to devices, it should give this
> > info to qemu and qemu can give this to guest.
> > Then anything outside that range can be ignored by VFIO.
>
> Then we get into deficiencies in the IOMMU API and maybe VFIO. There's
> currently no way to find out the address width of the IOMMU. We've been
> getting by because it's safely close enough to the CPU address width to
> not be a concern until we start exposing things at the top of the 64bit
> address space. Maybe I can safely ignore anything above
> TARGET_PHYS_ADDR_SPACE_BITS for now. Thanks,
>
> Alex
I think it's not related to target CPU at all - it's a host limitation.
So just make up your own constant, maybe depending on host architecture.
Long term add an ioctl to query it.
Also, we can add a fwcfg interface to tell bios that it should avoid
placing BARs above some address.
Since it's a vfio limitation I think it should be a vfio API, along the
lines of vfio_get_addr_space_bits(void).
(Is this true btw? legacy assignment doesn't have this problem?)
Something like this makes sense to you?
--
MST
