)
Am 09.05.2014 19:05, schrieb Paolo Bonzini:
Il 09/05/2014 15:13, Stefan Priebe - Profihost AG ha scritto:
I see no output at the monitor of Qemu 2.0.
# migrate -d tcp:a.b.c.d:6000
# info migrate
capabilities: xbzrle: off x-rdma-pin-all: off auto-converge: on
zero-blocks: off
Migration status: failed
total time: 0 milliseconds
The target machine is still running at this point with no output.
Anything on its stdout?
Sadly no.
But far more complex than i thought. I'm seeing this problem only on
machines originally started under qemu 1.5 ten migrated to qemu 1.7 with
machine type=pc440fc-1.5 . Only those do not work. But they also do not
work migrating them to qemu 1.7.1.
So let's ignore the whole fact and thanks for your bisect ideas. I will
just shut them down all and start them with a fresh qemu 2.0.
Another test you could do, in addition to changing the devices, is this:
1) try with commit 6141f3bd6904df7cf9519c6444a14a608b9874c4 on the
destination (the next one caused a migration problem that was fixed
later). If it passes, go to step 1a. If it fails, go to step 2.
1a) try with commit c01a71c1a56fa27f43449ff59e5d03b2483658a2. If it
passes, go to step 1b. If it fails, report it here.
1b) bisect between v2.0.0 (known-bad) and
c01a71c1a56fa27f43449ff59e5d03b2483658a2 (known-good) to find the
culprit. Report results.
2) change the source to v1.7.0 and bisect between v1.7.0 and
6141f3bd6904df7cf9519c6444a14a608b9874c4. Report results.
Thanks!
Paolo