This replaces the _PRT constant with a method that computes it. The problem is that the DSDT+SSDT have grown from 2.0 to 2.1, enough to cross the 8k barrier (we align the ACPI tables to 4k before putting them in fw_cfg). This causes problems with migration and the pc-2.0 machine type.
The solution to the problem is to hardcode 64k as the limit, but this doesn't solve the bug with pc-2.0. The fix will be for QEMU 2.1 to use exactly the same size as QEMU 2.0 for the ACPI tables. First, however, we must make the actual AML size equal or smaller; to do this, rewrite _PRT in a way that saves over 1k of bytecode. Tested on Windows XP. Q35 already uses a method for _PRT so most guests should be okay. Signed-off-by: Paolo Bonzini <pbonz...@redhat.com> --- hw/i386/acpi-dsdt.dsl | 90 ++++++++++++++++++++++----------------------------- 1 file changed, 39 insertions(+), 51 deletions(-) diff --git a/hw/i386/acpi-dsdt.dsl b/hw/i386/acpi-dsdt.dsl index 3cc0ea0..6ba0170 100644 --- a/hw/i386/acpi-dsdt.dsl +++ b/hw/i386/acpi-dsdt.dsl @@ -181,57 +181,45 @@ DefinitionBlock ( Scope(\_SB) { Scope(PCI0) { - Name(_PRT, Package() { - /* PCI IRQ routing table, example from ACPI 2.0a specification, - section 6.2.8.1 */ - /* Note: we provide the same info as the PCI routing - table of the Bochs BIOS */ - -#define prt_slot(nr, lnk0, lnk1, lnk2, lnk3) \ - Package() { nr##ffff, 0, lnk0, 0 }, \ - Package() { nr##ffff, 1, lnk1, 0 }, \ - Package() { nr##ffff, 2, lnk2, 0 }, \ - Package() { nr##ffff, 3, lnk3, 0 } - -#define prt_slot0(nr) prt_slot(nr, LNKD, LNKA, LNKB, LNKC) -#define prt_slot1(nr) prt_slot(nr, LNKA, LNKB, LNKC, LNKD) -#define prt_slot2(nr) prt_slot(nr, LNKB, LNKC, LNKD, LNKA) -#define prt_slot3(nr) prt_slot(nr, LNKC, LNKD, LNKA, LNKB) - - prt_slot0(0x0000), - /* Device 1 is power mgmt device, and can only use irq 9 */ - prt_slot(0x0001, LNKS, LNKB, LNKC, LNKD), - prt_slot2(0x0002), - prt_slot3(0x0003), - prt_slot0(0x0004), - prt_slot1(0x0005), - prt_slot2(0x0006), - prt_slot3(0x0007), - prt_slot0(0x0008), - prt_slot1(0x0009), - prt_slot2(0x000a), - prt_slot3(0x000b), - prt_slot0(0x000c), - prt_slot1(0x000d), - prt_slot2(0x000e), - prt_slot3(0x000f), - prt_slot0(0x0010), - prt_slot1(0x0011), - prt_slot2(0x0012), - prt_slot3(0x0013), - prt_slot0(0x0014), - prt_slot1(0x0015), - prt_slot2(0x0016), - prt_slot3(0x0017), - prt_slot0(0x0018), - prt_slot1(0x0019), - prt_slot2(0x001a), - prt_slot3(0x001b), - prt_slot0(0x001c), - prt_slot1(0x001d), - prt_slot2(0x001e), - prt_slot3(0x001f), - }) + Method (_PRT, 0) { + Store(Package(128) {}, Local0) + Store(Zero, Local1) + While(LLess(Local1, 128)) { + // slot = pin >> 2 + Store(ShiftRight(Local1, 2), Local2) + + // lnk = (slot + pin) & 3 + Store(And(Add(Local1, Local2), 3), Local3) + If (LEqual(Local3, 0)) { + Store(Package(4) { Zero, Zero, LNKD, Zero }, Local4) + } + If (LEqual(Local3, 1)) { + // device 1 is the power-management device, needs SCI + If (LEqual(Local1, 4)) { + Store(Package(4) { Zero, Zero, LNKS, Zero }, Local4) + } Else { + Store(Package(4) { Zero, Zero, LNKA, Zero }, Local4) + } + } + If (LEqual(Local3, 2)) { + Store(Package(4) { Zero, Zero, LNKB, Zero }, Local4) + } + If (LEqual(Local3, 3)) { + Store(Package(4) { Zero, Zero, LNKC, Zero }, Local4) + } + + // Complete the interrupt routing entry: + // Package(4) { 0x[slot]FFFF, [pin], [link], 0) } + + Store(Or(ShiftLeft(Local2, 16), 0xFFFF), Index(Local4, 0)) + Store(And(Local1, 3), Index(Local4, 1)) + Store(Local4, Index(Local0, Local1)) + + Increment(Local1) + } + + Return(Local0) + } } Field(PCI0.ISA.P40C, ByteAcc, NoLock, Preserve) { -- 1.8.3.1