Hi,
This series the usb host adapters hot-pluggable. Problem is that we
can NOT hotplug host adapters which are part of a companion setup. The
way this is tackled now is to split the usb host adapter variants into
two groups:
* All ich9-* variants (both uhci and ehci) support companion controller
and are NOT hot-pluggable.
* All other variants do NOT support companion controller setups and
can be hotplugged.
[ ohci is to be done, we have only one type there, so we have to create
a new one and put the existing into one of the two groups, /me wants
collect feedback on the approach though. ]
Comments? Other suggestions?
cheers,
Gerd
Gerd Hoffmann (4):
usb: tag xhci as hotpluggable
usb: tag standalone uhci as hotpluggable
usb: tag standalone ehci as hotpluggable
[wip] usb: tag ohci as hotpluggable
Gonglei (1):
tests: add usb hcds hotplugging qtest
hw/usb/hcd-ehci-pci.c | 12 ++++++-
hw/usb/hcd-ehci.c | 8 +++--
hw/usb/hcd-ehci.h | 1 +
hw/usb/hcd-ohci.c | 1 -
hw/usb/hcd-uhci.c | 16 +++++++--
hw/usb/hcd-xhci.c | 1 -
tests/Makefile | 2 ++
tests/usb-hcd-hotplug-test.c | 86 ++++++++++++++++++++++++++++++++++++++++++++
8 files changed, 119 insertions(+), 8 deletions(-)
create mode 100644 tests/usb-hcd-hotplug-test.c
--
1.8.3.1
