From: Alexey Kardashevskiy <a...@ozlabs.ru>
This converts many kinds of debug prints to traces.
This implements packets logging to avoid unnecessary calculations if
usb_ohci_td_pkt_short/usb_ohci_td_pkt_long is not enabled.
This makes OHCI errors (such as "DMA error") invisible by default.
Signed-off-by: Alexey Kardashevskiy <a...@ozlabs.ru>
Signed-off-by: Gerd Hoffmann <kra...@redhat.com>
---
hw/usb/hcd-ohci.c | 222 ++++++++++++++++++++++++------------------------------
trace-events | 56 ++++++++++++++
2 files changed, 155 insertions(+), 123 deletions(-)
diff --git a/hw/usb/hcd-ohci.c b/hw/usb/hcd-ohci.c
index 83bec34..7ea871d 100644
--- a/hw/usb/hcd-ohci.c
+++ b/hw/usb/hcd-ohci.c
@@ -31,20 +31,11 @@
#include "hw/pci/pci.h"
#include "hw/sysbus.h"
#include "hw/qdev-dma.h"
+#include "trace.h"
-//#define DEBUG_OHCI
-/* Dump packet contents. */
-//#define DEBUG_PACKET
-//#define DEBUG_ISOCH
/* This causes frames to occur 1000x slower */
//#define OHCI_TIME_WARP 1
-#ifdef DEBUG_OHCI
-#define DPRINTF printf
-#else
-#define DPRINTF(...)
-#endif
-
/* Number of Downstream Ports on the root hub. */
#define OHCI_MAX_PORTS 15
@@ -350,7 +341,7 @@ static void ohci_attach(USBPort *port1)
ohci_set_interrupt(s, OHCI_INTR_RD);
}
- DPRINTF("usb-ohci: Attached port %d\n", port1->index);
+ trace_usb_ohci_port_attach(port1->index);
if (old_state != port->ctrl) {
ohci_set_interrupt(s, OHCI_INTR_RHSC);
@@ -375,7 +366,7 @@ static void ohci_detach(USBPort *port1)
port->ctrl &= ~OHCI_PORT_PES;
port->ctrl |= OHCI_PORT_PESC;
}
- DPRINTF("usb-ohci: Detached port %d\n", port1->index);
+ trace_usb_ohci_port_detach(port1->index);
if (old_state != port->ctrl) {
ohci_set_interrupt(s, OHCI_INTR_RHSC);
@@ -388,14 +379,14 @@ static void ohci_wakeup(USBPort *port1)
OHCIPort *port = &s->rhport[port1->index];
uint32_t intr = 0;
if (port->ctrl & OHCI_PORT_PSS) {
- DPRINTF("usb-ohci: port %d: wakeup\n", port1->index);
+ trace_usb_ohci_port_wakeup(port1->index);
port->ctrl |= OHCI_PORT_PSSC;
port->ctrl &= ~OHCI_PORT_PSS;
intr = OHCI_INTR_RHSC;
}
/* Note that the controller can be suspended even if this port is not */
if ((s->ctl & OHCI_CTL_HCFS) == OHCI_USB_SUSPEND) {
- DPRINTF("usb-ohci: remote-wakeup: SUSPEND->RESUME\n");
+ trace_usb_ohci_remote_wakeup(s->name);
/* This is the one state transition the controller can do by itself */
s->ctl &= ~OHCI_CTL_HCFS;
s->ctl |= OHCI_USB_RESUME;
@@ -497,7 +488,7 @@ static void ohci_reset(void *opaque)
ohci->async_td = 0;
}
ohci_stop_endpoints(ohci);
- DPRINTF("usb-ohci: Reset %s\n", ohci->name);
+ trace_usb_ohci_reset(ohci->name);
}
/* Get an array of dwords from main memory */
@@ -690,9 +681,8 @@ static void ohci_process_lists(OHCIState *ohci, int
completion);
static void ohci_async_complete_packet(USBPort *port, USBPacket *packet)
{
OHCIState *ohci = container_of(packet, OHCIState, usb_packet);
-#ifdef DEBUG_PACKET
- DPRINTF("Async packet complete\n");
-#endif
+
+ trace_usb_ohci_async_complete();
ohci->async_complete = true;
ohci_process_lists(ohci, 1);
}
@@ -704,9 +694,7 @@ static int ohci_service_iso_td(OHCIState *ohci, struct
ohci_ed *ed,
{
int dir;
size_t len = 0;
-#ifdef DEBUG_ISOCH
const char *str = NULL;
-#endif
int pid;
int ret;
int i;
@@ -723,7 +711,7 @@ static int ohci_service_iso_td(OHCIState *ohci, struct
ohci_ed *ed,
addr = ed->head & OHCI_DPTR_MASK;
if (ohci_read_iso_td(ohci, addr, &iso_td)) {
- printf("usb-ohci: ISO_TD read error at %x\n", addr);
+ trace_usb_ohci_iso_td_read_failed(addr);
ohci_die(ohci);
return 0;
}
@@ -732,14 +720,7 @@ static int ohci_service_iso_td(OHCIState *ohci, struct
ohci_ed *ed,
frame_count = OHCI_BM(iso_td.flags, TD_FC);
relative_frame_number = USUB(ohci->frame_number, starting_frame);
-#ifdef DEBUG_ISOCH
- printf("--- ISO_TD ED head 0x%.8x tailp 0x%.8x\n"
- "0x%.8x 0x%.8x 0x%.8x 0x%.8x\n"
- "0x%.8x 0x%.8x 0x%.8x 0x%.8x\n"
- "0x%.8x 0x%.8x 0x%.8x 0x%.8x\n"
- "frame_number 0x%.8x starting_frame 0x%.8x\n"
- "frame_count 0x%.8x relative %d\n"
- "di 0x%.8x cc 0x%.8x\n",
+ trace_usb_ohci_iso_td_head(
ed->head & OHCI_DPTR_MASK, ed->tail & OHCI_DPTR_MASK,
iso_td.flags, iso_td.bp, iso_td.next, iso_td.be,
iso_td.offset[0], iso_td.offset[1], iso_td.offset[2],
iso_td.offset[3],
@@ -747,16 +728,15 @@ static int ohci_service_iso_td(OHCIState *ohci, struct
ohci_ed *ed,
ohci->frame_number, starting_frame,
frame_count, relative_frame_number,
OHCI_BM(iso_td.flags, TD_DI), OHCI_BM(iso_td.flags, TD_CC));
-#endif
if (relative_frame_number < 0) {
- DPRINTF("usb-ohci: ISO_TD R=%d < 0\n", relative_frame_number);
+ trace_usb_ohci_iso_td_relative_frame_number_neg(relative_frame_number);
return 1;
} else if (relative_frame_number > frame_count) {
/* ISO TD expired - retire the TD to the Done Queue and continue with
the next ISO TD of the same ED */
- DPRINTF("usb-ohci: ISO_TD R=%d > FC=%d\n", relative_frame_number,
- frame_count);
+ trace_usb_ohci_iso_td_relative_frame_number_big(relative_frame_number,
+ frame_count);
OHCI_SET_BM(iso_td.flags, TD_CC, OHCI_CC_DATAOVERRUN);
ed->head &= ~OHCI_DPTR_MASK;
ed->head |= (iso_td.next & OHCI_DPTR_MASK);
@@ -775,30 +755,24 @@ static int ohci_service_iso_td(OHCIState *ohci, struct
ohci_ed *ed,
dir = OHCI_BM(ed->flags, ED_D);
switch (dir) {
case OHCI_TD_DIR_IN:
-#ifdef DEBUG_ISOCH
str = "in";
-#endif
pid = USB_TOKEN_IN;
break;
case OHCI_TD_DIR_OUT:
-#ifdef DEBUG_ISOCH
str = "out";
-#endif
pid = USB_TOKEN_OUT;
break;
case OHCI_TD_DIR_SETUP:
-#ifdef DEBUG_ISOCH
str = "setup";
-#endif
pid = USB_TOKEN_SETUP;
break;
default:
- printf("usb-ohci: Bad direction %d\n", dir);
+ trace_usb_ohci_iso_td_bad_direction(dir);
return 1;
}
if (!iso_td.bp || !iso_td.be) {
- printf("usb-ohci: ISO_TD bp 0x%.8x be 0x%.8x\n", iso_td.bp, iso_td.be);
+ trace_usb_ohci_iso_td_bad_bp_be(iso_td.bp, iso_td.be);
return 1;
}
@@ -808,14 +782,12 @@ static int ohci_service_iso_td(OHCIState *ohci, struct
ohci_ed *ed,
if (!(OHCI_BM(start_offset, TD_PSW_CC) & 0xe) ||
((relative_frame_number < frame_count) &&
!(OHCI_BM(next_offset, TD_PSW_CC) & 0xe))) {
- printf("usb-ohci: ISO_TD cc != not accessed 0x%.8x 0x%.8x\n",
- start_offset, next_offset);
+ trace_usb_ohci_iso_td_bad_cc_not_accessed(start_offset, next_offset);
return 1;
}
if ((relative_frame_number < frame_count) && (start_offset > next_offset))
{
- printf("usb-ohci: ISO_TD start_offset=0x%.8x > next_offset=0x%.8x\n",
- start_offset, next_offset);
+ trace_usb_ohci_iso_td_bad_cc_overrun(start_offset, next_offset);
return 1;
}
@@ -875,10 +847,8 @@ static int ohci_service_iso_td(OHCIState *ohci, struct
ohci_ed *ed,
ret = ohci->usb_packet.status;
}
-#ifdef DEBUG_ISOCH
- printf("so 0x%.8x eo 0x%.8x\nsa 0x%.8x ea 0x%.8x\ndir %s len %zu ret %d\n",
- start_offset, end_offset, start_addr, end_addr, str, len, ret);
-#endif
+ trace_usb_ohci_iso_td_so(start_offset, end_offset, start_addr, end_addr,
+ str, len, ret);
/* Writeback */
if (dir == OHCI_TD_DIR_IN && ret >= 0 && ret <= len) {
@@ -898,13 +868,13 @@ static int ohci_service_iso_td(OHCIState *ohci, struct
ohci_ed *ed,
OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, 0);
} else {
if (ret > (ssize_t) len) {
- printf("usb-ohci: DataOverrun %d > %zu\n", ret, len);
+ trace_usb_ohci_iso_td_data_overrun(ret, len);
OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC,
OHCI_CC_DATAOVERRUN);
OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE,
len);
} else if (ret >= 0) {
- printf("usb-ohci: DataUnderrun %d\n", ret);
+ trace_usb_ohci_iso_td_data_underrun(ret);
OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC,
OHCI_CC_DATAUNDERRUN);
} else {
@@ -918,14 +888,14 @@ static int ohci_service_iso_td(OHCIState *ohci, struct
ohci_ed *ed,
break;
case USB_RET_NAK:
case USB_RET_STALL:
- printf("usb-ohci: got NAK/STALL %d\n", ret);
+ trace_usb_ohci_iso_td_nak(ret);
OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC,
OHCI_CC_STALL);
OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE,
0);
break;
default:
- printf("usb-ohci: Bad device response %d\n", ret);
+ trace_usb_ohci_iso_td_bad_response(ret);
OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC,
OHCI_CC_UNDEXPETEDPID);
break;
@@ -950,6 +920,43 @@ static int ohci_service_iso_td(OHCIState *ohci, struct
ohci_ed *ed,
return 1;
}
+#ifdef trace_event_get_state
+static void ohci_td_pkt(const char *msg, const uint8_t *buf, size_t len)
+{
+ bool print16 = !!trace_event_get_state(TRACE_USB_OHCI_TD_PKT_SHORT);
+ bool printall = !!trace_event_get_state(TRACE_USB_OHCI_TD_PKT_FULL);
+ const int width = 16;
+ int i;
+ char tmp[3 * width + 1];
+ char *p = tmp;
+
+ if (!printall && !print16) {
+ return;
+ }
+
+ for (i = 0; ; i++) {
+ if (i && (!(i % width) || (i == len))) {
+ if (!printall) {
+ trace_usb_ohci_td_pkt_short(msg, tmp);
+ break;
+ }
+ trace_usb_ohci_td_pkt_full(msg, tmp);
+ p = tmp;
+ *p = 0;
+ }
+ if (i == len) {
+ break;
+ }
+
+ p += sprintf(p, " %.2x", buf[i]);
+ }
+}
+#else
+static void ohci_td_pkt(const char *msg, const uint8_t *buf, size_t len)
+{
+}
+#endif
+
/* Service a transport descriptor.
Returns nonzero to terminate processing of this endpoint. */
@@ -957,9 +964,7 @@ static int ohci_service_td(OHCIState *ohci, struct ohci_ed
*ed)
{
int dir;
size_t len = 0, pktlen = 0;
-#ifdef DEBUG_PACKET
const char *str = NULL;
-#endif
int pid;
int ret;
int i;
@@ -974,13 +979,11 @@ static int ohci_service_td(OHCIState *ohci, struct
ohci_ed *ed)
/* See if this TD has already been submitted to the device. */
completion = (addr == ohci->async_td);
if (completion && !ohci->async_complete) {
-#ifdef DEBUG_PACKET
- DPRINTF("Skipping async TD\n");
-#endif
+ trace_usb_ohci_td_skip_async();
return 1;
}
if (ohci_read_td(ohci, addr, &td)) {
- fprintf(stderr, "usb-ohci: TD read error at %x\n", addr);
+ trace_usb_ohci_td_read_error(addr);
ohci_die(ohci);
return 0;
}
@@ -998,25 +1001,19 @@ static int ohci_service_td(OHCIState *ohci, struct
ohci_ed *ed)
switch (dir) {
case OHCI_TD_DIR_IN:
-#ifdef DEBUG_PACKET
str = "in";
-#endif
pid = USB_TOKEN_IN;
break;
case OHCI_TD_DIR_OUT:
-#ifdef DEBUG_PACKET
str = "out";
-#endif
pid = USB_TOKEN_OUT;
break;
case OHCI_TD_DIR_SETUP:
-#ifdef DEBUG_PACKET
str = "setup";
-#endif
pid = USB_TOKEN_SETUP;
break;
default:
- fprintf(stderr, "usb-ohci: Bad direction\n");
+ trace_usb_ohci_td_bad_direction(dir);
return 1;
}
if (td.cbp && td.be) {
@@ -1043,19 +1040,10 @@ static int ohci_service_td(OHCIState *ohci, struct
ohci_ed *ed)
}
flag_r = (td.flags & OHCI_TD_R) != 0;
-#ifdef DEBUG_PACKET
- DPRINTF(" TD @ 0x%.8x %" PRId64 " of %" PRId64
- " bytes %s r=%d cbp=0x%.8x be=0x%.8x\n",
- addr, (int64_t)pktlen, (int64_t)len, str, flag_r, td.cbp, td.be);
-
- if (pktlen > 0 && dir != OHCI_TD_DIR_IN) {
- DPRINTF(" data:");
- for (i = 0; i < pktlen; i++) {
- printf(" %.2x", ohci->usb_buf[i]);
- }
- DPRINTF("\n");
- }
-#endif
+ trace_usb_ohci_td_pkt_hdr(addr, (int64_t)pktlen, (int64_t)len, str,
+ flag_r, td.cbp, td.be);
+ ohci_td_pkt("OUT", ohci->usb_buf, pktlen);
+
if (completion) {
ohci->async_td = 0;
ohci->async_complete = false;
@@ -1066,9 +1054,7 @@ static int ohci_service_td(OHCIState *ohci, struct
ohci_ed *ed)
This should be sufficient as long as devices respond in a
timely manner.
*/
-#ifdef DEBUG_PACKET
- DPRINTF("Too many pending packets\n");
-#endif
+ trace_usb_ohci_td_too_many_pending();
return 1;
}
dev = ohci_find_device(ohci, OHCI_BM(ed->flags, ED_FA));
@@ -1077,9 +1063,8 @@ static int ohci_service_td(OHCIState *ohci, struct
ohci_ed *ed)
OHCI_BM(td.flags, TD_DI) == 0);
usb_packet_addbuf(&ohci->usb_packet, ohci->usb_buf, pktlen);
usb_handle_packet(dev, &ohci->usb_packet);
-#ifdef DEBUG_PACKET
- DPRINTF("status=%d\n", ohci->usb_packet.status);
-#endif
+ trace_usb_ohci_td_packet_status(ohci->usb_packet.status);
+
if (ohci->usb_packet.status == USB_RET_ASYNC) {
usb_device_flush_ep_queue(dev, ep);
ohci->async_td = addr;
@@ -1098,12 +1083,7 @@ static int ohci_service_td(OHCIState *ohci, struct
ohci_ed *ed)
DMA_DIRECTION_FROM_DEVICE)) {
ohci_die(ohci);
}
-#ifdef DEBUG_PACKET
- DPRINTF(" data:");
- for (i = 0; i < ret; i++)
- printf(" %.2x", ohci->usb_buf[i]);
- DPRINTF("\n");
-#endif
+ ohci_td_pkt("IN", ohci->usb_buf, pktlen);
} else {
ret = pktlen;
}
@@ -1137,28 +1117,28 @@ static int ohci_service_td(OHCIState *ohci, struct
ohci_ed *ed)
ed->head |= OHCI_ED_C;
} else {
if (ret >= 0) {
- DPRINTF("usb-ohci: Underrun\n");
+ trace_usb_ohci_td_underrun();
OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_DATAUNDERRUN);
} else {
switch (ret) {
case USB_RET_IOERROR:
case USB_RET_NODEV:
- DPRINTF("usb-ohci: got DEV ERROR\n");
+ trace_usb_ohci_td_dev_error();
OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_DEVICENOTRESPONDING);
break;
case USB_RET_NAK:
- DPRINTF("usb-ohci: got NAK\n");
+ trace_usb_ohci_td_nak();
return 1;
case USB_RET_STALL:
- DPRINTF("usb-ohci: got STALL\n");
+ trace_usb_ohci_td_stall();
OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_STALL);
break;
case USB_RET_BABBLE:
- DPRINTF("usb-ohci: got BABBLE\n");
+ trace_usb_ohci_td_babble();
OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_DATAOVERRUN);
break;
default:
- fprintf(stderr, "usb-ohci: Bad device response %d\n", ret);
+ trace_usb_ohci_td_bad_device_response(ret);
OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_UNDEXPETEDPID);
OHCI_SET_BM(td.flags, TD_EC, 3);
break;
@@ -1198,7 +1178,7 @@ static int ohci_service_ed_list(OHCIState *ohci, uint32_t
head, int completion)
for (cur = head; cur; cur = next_ed) {
if (ohci_read_ed(ohci, cur, &ed)) {
- fprintf(stderr, "usb-ohci: ED read error at %x\n", cur);
+ trace_usb_ohci_ed_read_error(cur);
ohci_die(ohci);
return 0;
}
@@ -1219,16 +1199,14 @@ static int ohci_service_ed_list(OHCIState *ohci,
uint32_t head, int completion)
}
while ((ed.head & OHCI_DPTR_MASK) != ed.tail) {
-#ifdef DEBUG_PACKET
- DPRINTF("ED @ 0x%.8x fa=%u en=%u d=%u s=%u k=%u f=%u mps=%u "
- "h=%u c=%u\n head=0x%.8x tailp=0x%.8x next=0x%.8x\n", cur,
+ trace_usb_ohci_ed_pkt(cur,
OHCI_BM(ed.flags, ED_FA), OHCI_BM(ed.flags, ED_EN),
OHCI_BM(ed.flags, ED_D), (ed.flags & OHCI_ED_S)!= 0,
(ed.flags & OHCI_ED_K) != 0, (ed.flags & OHCI_ED_F) != 0,
OHCI_BM(ed.flags, ED_MPS), (ed.head & OHCI_ED_H) != 0,
(ed.head & OHCI_ED_C) != 0, ed.head & OHCI_DPTR_MASK,
ed.tail & OHCI_DPTR_MASK, ed.next & OHCI_DPTR_MASK);
-#endif
+
active = 1;
if ((ed.flags & OHCI_ED_F) == 0) {
@@ -1263,8 +1241,7 @@ static void ohci_process_lists(OHCIState *ohci, int
completion)
{
if ((ohci->ctl & OHCI_CTL_CLE) && (ohci->status & OHCI_STATUS_CLF)) {
if (ohci->ctrl_cur && ohci->ctrl_cur != ohci->ctrl_head) {
- DPRINTF("usb-ohci: head %x, cur %x\n",
- ohci->ctrl_head, ohci->ctrl_cur);
+ trace_usb_ohci_process_lists(ohci->ctrl_head, ohci->ctrl_cur);
}
if (!ohci_service_ed_list(ohci, ohci->ctrl_head, completion)) {
ohci->ctrl_cur = 0;
@@ -1287,7 +1264,7 @@ static void ohci_frame_boundary(void *opaque)
struct ohci_hcca hcca;
if (ohci_read_hcca(ohci, ohci->hcca, &hcca)) {
- fprintf(stderr, "usb-ohci: HCCA read error at %x\n", ohci->hcca);
+ trace_usb_ohci_hcca_read_error(ohci->hcca);
ohci_die(ohci);
return;
}
@@ -1356,12 +1333,12 @@ static int ohci_bus_start(OHCIState *ohci)
ohci);
if (ohci->eof_timer == NULL) {
- fprintf(stderr, "usb-ohci: %s: timer_new_ns failed\n", ohci->name);
+ trace_usb_ohci_bus_eof_timer_failed(ohci->name);
ohci_die(ohci);
return 0;
}
- DPRINTF("usb-ohci: %s: USB Operational\n", ohci->name);
+ trace_usb_ohci_start(ohci->name);
ohci_sof(ohci);
@@ -1371,6 +1348,7 @@ static int ohci_bus_start(OHCIState *ohci)
/* Stop sending SOF tokens on the bus */
static void ohci_bus_stop(OHCIState *ohci)
{
+ trace_usb_ohci_stop(ohci->name);
if (ohci->eof_timer) {
timer_del(ohci->eof_timer);
timer_free(ohci->eof_timer);
@@ -1416,8 +1394,7 @@ static void ohci_set_frame_interval(OHCIState *ohci,
uint16_t val)
val &= OHCI_FMI_FI;
if (val != ohci->fi) {
- DPRINTF("usb-ohci: %s: FrameInterval = 0x%x (%u)\n",
- ohci->name, ohci->fi, ohci->fi);
+ trace_usb_ohci_set_frame_interval(ohci->name, ohci->fi, ohci->fi);
}
ohci->fi = val;
@@ -1449,20 +1426,19 @@ static void ohci_set_ctl(OHCIState *ohci, uint32_t val)
if (old_state == new_state)
return;
+ trace_usb_ohci_set_ctl(ohci->name, new_state);
switch (new_state) {
case OHCI_USB_OPERATIONAL:
ohci_bus_start(ohci);
break;
case OHCI_USB_SUSPEND:
ohci_bus_stop(ohci);
- DPRINTF("usb-ohci: %s: USB Suspended\n", ohci->name);
break;
case OHCI_USB_RESUME:
- DPRINTF("usb-ohci: %s: USB Resume\n", ohci->name);
+ trace_usb_ohci_resume(ohci->name);
break;
case OHCI_USB_RESET:
ohci_reset(ohci);
- DPRINTF("usb-ohci: %s: USB Reset\n", ohci->name);
break;
}
}
@@ -1507,7 +1483,7 @@ static void ohci_set_hub_status(OHCIState *ohci, uint32_t
val)
for (i = 0; i < ohci->num_ports; i++)
ohci_port_power(ohci, i, 0);
- DPRINTF("usb-ohci: powered down all ports\n");
+ trace_usb_ohci_hub_power_down();
}
if (val & OHCI_RHS_LPSC) {
@@ -1515,7 +1491,7 @@ static void ohci_set_hub_status(OHCIState *ohci, uint32_t
val)
for (i = 0; i < ohci->num_ports; i++)
ohci_port_power(ohci, i, 1);
- DPRINTF("usb-ohci: powered up all ports\n");
+ trace_usb_ohci_hub_power_up();
}
if (val & OHCI_RHS_DRWE)
@@ -1547,11 +1523,11 @@ static void ohci_port_set_status(OHCIState *ohci, int
portnum, uint32_t val)
ohci_port_set_if_connected(ohci, portnum, val & OHCI_PORT_PES);
if (ohci_port_set_if_connected(ohci, portnum, val & OHCI_PORT_PSS)) {
- DPRINTF("usb-ohci: port %d: SUSPEND\n", portnum);
+ trace_usb_ohci_port_suspend(portnum);
}
if (ohci_port_set_if_connected(ohci, portnum, val & OHCI_PORT_PRS)) {
- DPRINTF("usb-ohci: port %d: RESET\n", portnum);
+ trace_usb_ohci_port_reset(portnum);
usb_device_reset(port->port.dev);
port->ctrl &= ~OHCI_PORT_PRS;
/* ??? Should this also set OHCI_PORT_PESC. */
@@ -1579,7 +1555,7 @@ static uint64_t ohci_mem_read(void *opaque,
/* Only aligned reads are allowed on OHCI */
if (addr & 3) {
- fprintf(stderr, "usb-ohci: Mis-aligned read\n");
+ trace_usb_ohci_mem_read_unaligned(addr);
return 0xffffffff;
} else if (addr >= 0x54 && addr < 0x54 + ohci->num_ports * 4) {
/* HcRhPortStatus */
@@ -1685,7 +1661,7 @@ static uint64_t ohci_mem_read(void *opaque,
break;
default:
- fprintf(stderr, "ohci_read: Bad offset %x\n", (int)addr);
+ trace_usb_ohci_mem_read_bad_offset(addr);
retval = 0xffffffff;
}
}
@@ -1702,7 +1678,7 @@ static void ohci_mem_write(void *opaque,
/* Only aligned reads are allowed on OHCI */
if (addr & 3) {
- fprintf(stderr, "usb-ohci: Mis-aligned write\n");
+ trace_usb_ohci_mem_write_unaligned(addr);
return;
}
@@ -1816,7 +1792,7 @@ static void ohci_mem_write(void *opaque,
break;
default:
- fprintf(stderr, "ohci_write: Bad offset %x\n", (int)addr);
+ trace_usb_ohci_mem_write_bad_offset(addr);
break;
}
}
@@ -1869,8 +1845,7 @@ static int usb_ohci_init(OHCIState *ohci, DeviceState
*dev,
usb_bit_time = 1;
}
#endif
- DPRINTF("usb-ohci: usb_bit_time=%" PRId64 " usb_frame_time=%" PRId64
"\n",
- usb_frame_time, usb_bit_time);
+ trace_usb_ohci_init_time(usb_frame_time, usb_bit_time);
}
ohci->num_ports = num_ports;
@@ -1928,7 +1903,7 @@ static void ohci_die(OHCIState *ohci)
{
OHCIPCIState *dev = container_of(ohci, OHCIPCIState, state);
- fprintf(stderr, "%s: DMA error\n", __func__);
+ trace_usb_ohci_die();
ohci_set_interrupt(ohci, OHCI_INTR_UE);
ohci_bus_stop(ohci);
@@ -1959,6 +1934,7 @@ static void usb_ohci_exit(PCIDevice *dev)
OHCIPCIState *ohci = PCI_OHCI(dev);
OHCIState *s = &ohci->state;
+ trace_usb_ohci_exit(s->name);
ohci_bus_stop(s);
if (s->async_td) {
diff --git a/trace-events b/trace-events
index fb58963..1bb0fa9 100644
--- a/trace-events
+++ b/trace-events
@@ -295,6 +295,62 @@ usb_port_attach(int bus, const char *port, const char
*devspeed, const char *por
usb_port_detach(int bus, const char *port) "bus %d, port %s"
usb_port_release(int bus, const char *port) "bus %d, port %s"
+# hw/usb/hcd-ohci.c
+usb_ohci_iso_td_read_failed(uint32_t addr) "ISO_TD read error at %x"
+usb_ohci_iso_td_head(uint32_t head, uint32_t tail, uint32_t flags, uint32_t
bp, uint32_t next, uint32_t be, uint32_t o0, uint32_t o1, uint32_t o2, uint32_t
o3, uint32_t o4, uint32_t o5, uint32_t o6, uint32_t o7, uint32_t framenum,
uint32_t startframe, uint32_t framecount, int rel_frame_num, uint32_t bm_di,
uint32_t td_cc) "ISO_TD ED head 0x%.8x tailp 0x%.8x\n0x%.8x 0x%.8x 0x%.8x
0x%.8x\n0x%.8x 0x%.8x 0x%.8x 0x%.8x\n0x%.8x 0x%.8x 0x%.8x 0x%.8x\nframe_number
0x%.8x starting_frame 0x%.8x\nframe_count 0x%.8x relative %d\ndi 0x%.8x cc
0x%.8x"
+usb_ohci_iso_td_relative_frame_number_neg(int rel) "ISO_TD R=%d < 0"
+usb_ohci_iso_td_relative_frame_number_big(int rel, int count) "ISO_TD R=%d >
FC=%d"
+usb_ohci_iso_td_bad_direction(int dir) "Bad direction %d"
+usb_ohci_iso_td_bad_bp_be(uint32_t bp, uint32_t be) "ISO_TD bp 0x%.8x be
0x%.8x"
+usb_ohci_iso_td_bad_cc_not_accessed(uint32_t start, uint32_t next) "ISO_TD cc
!= not accessed 0x%.8x 0x%.8x"
+usb_ohci_iso_td_bad_cc_overrun(uint32_t start, uint32_t next) "ISO_TD
start_offset=0x%.8x > next_offset=0x%.8x"
+usb_ohci_iso_td_so(uint32_t so, uint32_t eo, uint32_t s, uint32_t e, const
char *str, ssize_t len, int ret) "0x%.8x eo 0x%.8x\nsa 0x%.8x ea 0x%.8x\ndir %s
len %zu ret %d"
+usb_ohci_iso_td_data_overrun(int ret, ssize_t len) "DataOverrun %d > %zu"
+usb_ohci_iso_td_data_underrun(int ret) "DataUnderrun %d"
+usb_ohci_iso_td_nak(int ret) "got NAK/STALL %d"
+usb_ohci_iso_td_bad_response(int ret) "Bad device response %d"
+usb_ohci_port_attach(int index) "port #%d"
+usb_ohci_port_detach(int index) "port #%d"
+usb_ohci_port_wakeup(int index) "port #%d"
+usb_ohci_port_suspend(int index) "port #%d"
+usb_ohci_port_reset(int index) "port #%d"
+usb_ohci_remote_wakeup(const char *s) "%s: SUSPEND->RESUME"
+usb_ohci_reset(const char *s) "%s"
+usb_ohci_start(const char *s) "%s: USB Operational"
+usb_ohci_resume(const char *s) "%s: USB Resume"
+usb_ohci_stop(const char *s) "%s: USB Suspended"
+usb_ohci_exit(const char *s) "%s"
+usb_ohci_set_ctl(const char *s, uint32_t new_state) "%s: new state 0x%x"
+usb_ohci_td_underrun(void) ""
+usb_ohci_td_dev_error(void) ""
+usb_ohci_td_nak(void) ""
+usb_ohci_td_stall(void) ""
+usb_ohci_td_babble(void) ""
+usb_ohci_td_bad_device_response(int rc) "%d"
+usb_ohci_td_read_error(uint32_t addr) "TD read error at %x"
+usb_ohci_td_bad_direction(int dir) "Bad direction %d"
+usb_ohci_td_skip_async(void) ""
+usb_ohci_td_pkt_hdr(uint32_t addr, int64_t pktlen, int64_t len, const char *s,
int flag_r, uint32_t cbp, uint32_t be) " TD @ 0x%.8x %" PRId64 " of %" PRId64 "
bytes %s r=%d cbp=0x%.8x be=0x%.8x"
+usb_ohci_td_pkt_short(const char *dir, const char *buf) "%s data: %s"
+usb_ohci_td_pkt_full(const char *dir, const char *buf) "%s data: %s"
+usb_ohci_td_too_many_pending(void) ""
+usb_ohci_td_packet_status(int status) "status=%d"
+usb_ohci_ed_read_error(uint32_t addr) "ED read error at %x"
+usb_ohci_ed_pkt(uint32_t cur, uint32_t fa, uint32_t en, uint32_t d, int s, int
k, int f, uint32_t mps, int h, int c, uint32_t head, uint32_t tail, uint32_t
next) "ED @ 0x%.8x fa=%u en=%u d=%u s=%u k=%u f=%u mps=%u h=%u c=%u\n
head=0x%.8x tailp=0x%.8x next=0x%.8x"
+usb_ohci_hcca_read_error(uint32_t addr) "HCCA read error at %x"
+usb_ohci_mem_read_unaligned(uint32_t addr) "at %x"
+usb_ohci_mem_read_bad_offset(uint32_t addr) "%x"
+usb_ohci_mem_write_unaligned(uint32_t addr) "at %x"
+usb_ohci_mem_write_bad_offset(uint32_t addr) "%x"
+usb_ohci_process_lists(uint32_t head, uint32_t cur) "head %x, cur %x"
+usb_ohci_bus_eof_timer_failed(const char *name) "%s: timer_new_ns failed"
+usb_ohci_set_frame_interval(const char *name, uint16_t fi_x, uint16_t fi_u)
"%s: FrameInterval = 0x%x (%u)"
+usb_ohci_hub_power_up(void) "powered up all ports"
+usb_ohci_hub_power_down(void) "powered down all ports"
+usb_ohci_init_time(int64_t frametime, int64_t bittime) "usb_bit_time=%" PRId64
" usb_frame_time=%" PRId64
+usb_ohci_die(void) ""
+usb_ohci_async_complete(void) ""
+
# hw/usb/hcd-ehci.c
usb_ehci_reset(void) "=== RESET ==="
usb_ehci_unrealize(void) "=== UNREALIZE ==="
--
1.8.3.1
