The bochs vbe interface got a new register a while back, which specifies
the linear framebuffer size in 64k units. This patch adds support for
the new register to qemu. With this patch applied vgabios 0.6c works
with qemu.
[ v2: Don't savevm the new register. Doing so breaks migration,
and as it carries read-only information for the guest there
is no need to save it. ]
[ v3: Don't put the new register into vbe_regs. ]
Signed-off-by: Gerd Hoffmann <kra...@redhat.com>
---
hw/vga.c | 6 ++++--
hw/vga_int.h | 4 +++-
2 files changed, 7 insertions(+), 3 deletions(-)
diff --git a/hw/vga.c b/hw/vga.c
index 6a1a059..bb65677 100644
--- a/hw/vga.c
+++ b/hw/vga.c
@@ -522,7 +522,7 @@ static uint32_t vbe_ioport_read_data(void *opaque, uint32_t
addr)
VGACommonState *s = opaque;
uint32_t val;
- if (s->vbe_index <= VBE_DISPI_INDEX_NB) {
+ if (s->vbe_index < VBE_DISPI_INDEX_NB) {
if (s->vbe_regs[VBE_DISPI_INDEX_ENABLE] & VBE_DISPI_GETCAPS) {
switch(s->vbe_index) {
/* XXX: do not hardcode ? */
@@ -542,6 +542,8 @@ static uint32_t vbe_ioport_read_data(void *opaque, uint32_t
addr)
} else {
val = s->vbe_regs[s->vbe_index];
}
+ } else if (s->vbe_index == VBE_DISPI_INDEX_VIDEO_MEMORY_64K) {
+ val = s->vram_size / (64 * 1024);
} else {
val = 0;
}
@@ -1955,7 +1957,7 @@ void vga_common_reset(VGACommonState *s)
#ifdef CONFIG_BOCHS_VBE
s->vbe_index = 0;
memset(s->vbe_regs, '\0', sizeof(s->vbe_regs));
- s->vbe_regs[VBE_DISPI_INDEX_ID] = VBE_DISPI_ID0;
+ s->vbe_regs[VBE_DISPI_INDEX_ID] = VBE_DISPI_ID5;
s->vbe_start_addr = 0;
s->vbe_line_offset = 0;
s->vbe_bank_mask = (s->vram_size >> 16) - 1;
diff --git a/hw/vga_int.h b/hw/vga_int.h
index 23a42ef..6a46a43 100644
--- a/hw/vga_int.h
+++ b/hw/vga_int.h
@@ -47,13 +47,15 @@
#define VBE_DISPI_INDEX_VIRT_HEIGHT 0x7
#define VBE_DISPI_INDEX_X_OFFSET 0x8
#define VBE_DISPI_INDEX_Y_OFFSET 0x9
-#define VBE_DISPI_INDEX_NB 0xa
+#define VBE_DISPI_INDEX_NB 0xa /* size of vbe_regs[] */
+#define VBE_DISPI_INDEX_VIDEO_MEMORY_64K 0xa /* read-only, not in vbe_regs */
#define VBE_DISPI_ID0 0xB0C0
#define VBE_DISPI_ID1 0xB0C1
#define VBE_DISPI_ID2 0xB0C2
#define VBE_DISPI_ID3 0xB0C3
#define VBE_DISPI_ID4 0xB0C4
+#define VBE_DISPI_ID5 0xB0C5
#define VBE_DISPI_DISABLED 0x00
#define VBE_DISPI_ENABLED 0x01
--
1.6.6.1
