On Thu, Mar 12, 2015 at 02:16:07PM +0100, Frank Blaschka wrote: > On Thu, Mar 12, 2015 at 11:50:02AM +0100, Frank Blaschka wrote: > > On Thu, Mar 12, 2015 at 11:03:50AM +0100, Michael S. Tsirkin wrote: > > > On Thu, Mar 12, 2015 at 10:54:24AM +0100, Frank Blaschka wrote: > > > > On Wed, Mar 11, 2015 at 06:42:34PM +0100, Michael S. Tsirkin wrote: > > > > > On Wed, Mar 11, 2015 at 03:38:44PM +0100, Frank Blaschka wrote: > > > > > > On Tue, Mar 10, 2015 at 03:26:23PM +0100, Michael S. Tsirkin wrote: > > > > > > > On Tue, Mar 10, 2015 at 02:03:34PM +0100, Frank Blaschka wrote: > > > > > > > > This patch changes the modeling of the s390 qemu pci > > > > > > > > infrastructure to > > > > > > > > better match the actual pci architecture defined by the real > > > > > > > > hardware. > > > > > > > > > > > > > > > > A pci host bridge like device (s390-pcihost) models the > > > > > > > > abstract view > > > > > > > > of the bare pci function. It provides s390 specific > > > > > > > > configuration > > > > > > > > attributes (fid and uid) for the attached pci device. The host > > > > > > > > bridge > > > > > > > > restrict the pci bus to just hold one single pci device. Also > > > > > > > > we have > > > > > > > > to make the s390 pci host bridge hot plugable. > > > > > > > > > > > > > > This requirement is really because of the 1 device per bus > > > > > > > limitation, isn't it? > > > > > > > If you supported many devices per bus, you could use > > > > > > > hotplug there and there won't be need to support hotplug > > > > > > > of the host bridge. > > > > > > > > > > > > > Absolutely yes. Have you seen my first proposal? > > > > > > It basically exploits the normal pci bridge/bus/slot mechanism but > > > > > > need > > > > > > a place to store s390 specific configuration attributes. > > > > > > > > > > > > The idea of a host bridge having this attributes and limit the bus > > > > > > to one slot was an alternate design approach suggested by Alex. > > > > > > > > > > > > I like Alex's idea because: > > > > > > 1) It reflects pretty well the actual nature of the pci system in > > > > > > real s390 hw > > > > > > 2) It does not create an somehow "artifical" pci topology > > > > > > > > > > > > > > > > I'll have to re-read but here's a thought: use your patch but > > > > > remove host bridge hotplug support code. > > > > > Stick a standard bridge with shpc support in the single slot > > > > > behind your host bridge (existing pci-bridge-dev should do the trick, > > > > > though not many people use it, so you might > > > > > run into bugs, but fixing them is a good idea anyway). > > > > > You can instanciate it automatically like Marcel's patches do > > > > > for PXB. > > > > Still don't undertsand so I try to summarize in my words please corrent > > > > me > > > > if I got something wrong > > > > > > > > - create a standard host bridge > > > > - change the s390-pcihost to be a pci 2 pci bridge > > > > > > Actually I suggested simply adding a pci 2 pci bridge behind > > > s390-pcihost. > > > > > > > - now we can hotplug the s390-pcihost + hotplug a pci device to this > > > > s390-pcihost using standard pci hotplug mechanism > > > > > > My idea was to just hotplug a pci device behind the standard pci 2 pci > > > bridge. don't support hotplugging bridge itself or s390-pcihost itself. > > > > > > > - we keep the 1 slot limit on the s390-pcihost. We need a place to > > > > store fid and uid information (see mail thread from my 1 proposal) > > > > > > Yes. > > > > > > > - If we need more than 32 pci functions we have to extend the primary > > > > pci bus > > > > via standart pci 2 pci bridges or add another standart host bridge > > > > > > > > Is this your suggestion? > > > > > > Almost, clarifications above. > > > > > OK, got your idea. Have to think about it and may do some prototyping. THX! > > > > hm, after thinking more about this I realized this is not working for us. > Remember we need a place to store the fid and uid attributes. This place > must be: > 1) uid/fid per pci device > 2) uid/fid in a hotplugable device > > I have the feeling we are at the beginning again. Although I liked Alex's > idea (host bridge containing uid/fid and having only 1 slot on the bus), it > looks like we end up at my first proposal. This does not require any > modification in base pci/bus code. > > Thx to all of you for the discussion and suggestions.
It's up to you, but don't get discouraged if you do like Alex's suggestion better after all. I'm not nacking this approach, just trying to figure it all out, and asking whether alternatives would work. > > > > > > > > > > You get hotplug + multiple devices for free. > > > > > > > > > > And the resulting topology is clearly something that *can* exist > > > > > on bare-metal, since no one can prevent users sticking > > > > > a pci bridge device in a pci slot. > > > > > > > > Again on bar s390 metal we do not have bridge bus slot at all. > > > > OS does not have any knowledge about it. So anything we try to model > > > > is somehow artificial. > > > > > > So I wonder: what does guest see if you do it like the above in QEMU? > > > Do s390 guests even have ability to enumerate pci to pci bridges? > > I think the answer is no. All a s390 guest can do is call a s390 > > instruction to get a list of pci functions. There is no further > > information about the function. The fact there might be a bridge/bus/slot > > is completely abstracted in hw and not exposed to the OS. > > > > I think the fact, the hw guaranties a pci function is completetly > > independent, made the kernel folks to decide to enumarate the domain. > > Looking at a pci address on the guest (or in general on s390 kernel) > > you will never see a bus or slot != 0 (xxxx:00:00.0) > > > > Anyhow what we are doing do model pci in qemu, the guest will only see > > a list of pci functions and enumerate the domain to create a pci > > address and that's it > > > > > > > > > > > > > > > Why do I prefer pci hotplug to s390 hotplug? > > > > > s390 hotplug is really surprise removal. There's no way > > > > > > > > Don't understand this neither. s390 linux kernel is well prepared > > > > to receive s390 specific events to signal a pci function is > > > > going away. Anyhow we end up I can generate this events > > > > > > > > > to get ack from guest. Linux isn't very well equipped to > > > > > handle that, we might be able to fix it with time but current > > > > > virtio drivers aren't very happy. > > > > > > > > > > > > > > > > > > > This is done by > > > > > > > > implementing a s390 specific bus to attach this new host bridge > > > > > > > > like > > > > > > > > devices. > > > > > > > > > > > > > > > > Sample qemu configuration: > > > > > > > > -device s390-pcihost,fid=16,uid=2216 > > > > > > > > -device e1000,bus=pci.0 > > > > > > > > -device s390-pcihost,fid=17,uid=2217,id=mydev > > > > > > > > -device ne2k_pci,bus=mydev.0,addr=0 > > > > > > > > > > > > > > > > A pci device references the corresponding host bridge via pci > > > > > > > > bus name > > > > > > > > (as usual). The pci device must be attached to slot 0 of the > > > > > > > > bus. > > > > > > > > > > > > > > > > The fid and uid must be unique for the qemu instance. The design > > > > > > > > allows to define (static and hotplug) multiple host bridges and > > > > > > > > support > > > > > > > > a large number of pci devices. > > > > > > > > > > > > > > How about sticking a pci to pci bridge behind the host bridge? > > > > > > > You could also support hotplug using shpc, all > > > > > > > this without writing code. > > > > > > > > > > > > > Hm, I don't understand this in detail, can you elaborate a little > > > > > > bit more > > > > > > on this? > > > > > > > > > > > > For me it looks like this has the same issues like my first > > > > > > proposal. We > > > > > > build a complete artifical pci topology in qemu, which has nothing > > > > > > to do with > > > > > > the real hw. If we include pci 2 pci bridges this makes > > > > > > configuration even > > > > > > more a nightmare for users. > > > > > > > > > > > > Do you think detangle pci bus from bridge breaks some fundamental > > > > > > design? > > > > > > If so, I would rather go with my first proposal than adding even > > > > > > more > > > > > > complexity to implementation and configuration. > > > > > > > > > > > > Thx, Frank > > > > > > > > > > > > > > > Signed-off-by: Frank Blaschka <blasc...@linux.vnet.ibm.com> > > > > > > > > --- > > > > > > > > hw/s390x/s390-pci-bus.c | 174 > > > > > > > > ++++++++++++++++++++++++++------------------- > > > > > > > > hw/s390x/s390-pci-bus.h | 24 ++++++- > > > > > > > > hw/s390x/s390-pci-inst.c | 2 +- > > > > > > > > hw/s390x/s390-virtio-ccw.c | 4 +- > > > > > > > > 4 files changed, 128 insertions(+), 76 deletions(-) > > > > > > > > > > > > > > > > diff --git a/hw/s390x/s390-pci-bus.c b/hw/s390x/s390-pci-bus.c > > > > > > > > index dc455a2..6ad80d9 100644 > > > > > > > > --- a/hw/s390x/s390-pci-bus.c > > > > > > > > +++ b/hw/s390x/s390-pci-bus.c > > > > > > > > @@ -32,12 +32,8 @@ int chsc_sei_nt2_get_event(void *res) > > > > > > > > PciCcdfErr *eccdf; > > > > > > > > int rc = 1; > > > > > > > > SeiContainer *sei_cont; > > > > > > > > - S390pciState *s = S390_PCI_HOST_BRIDGE( > > > > > > > > - object_resolve_path(TYPE_S390_PCI_HOST_BRIDGE, NULL)); > > > > > > > > - > > > > > > > > - if (!s) { > > > > > > > > - return rc; > > > > > > > > - } > > > > > > > > + PCIFacility *s = PCI_FACILITY( > > > > > > > > + object_resolve_path(TYPE_PCI_FACILITY, NULL)); > > > > > > > > > > > > > > > > sei_cont = QTAILQ_FIRST(&s->pending_sei); > > > > > > > > if (sei_cont) { > > > > > > > > @@ -71,31 +67,23 @@ int chsc_sei_nt2_get_event(void *res) > > > > > > > > > > > > > > > > int chsc_sei_nt2_have_event(void) > > > > > > > > { > > > > > > > > - S390pciState *s = S390_PCI_HOST_BRIDGE( > > > > > > > > - object_resolve_path(TYPE_S390_PCI_HOST_BRIDGE, NULL)); > > > > > > > > - > > > > > > > > - if (!s) { > > > > > > > > - return 0; > > > > > > > > - } > > > > > > > > + PCIFacility *s = PCI_FACILITY( > > > > > > > > + object_resolve_path(TYPE_PCI_FACILITY, NULL)); > > > > > > > > > > > > > > > > return !QTAILQ_EMPTY(&s->pending_sei); > > > > > > > > } > > > > > > > > > > > > > > > > S390PCIBusDevice *s390_pci_find_dev_by_fid(uint32_t fid) > > > > > > > > { > > > > > > > > - S390PCIBusDevice *pbdev; > > > > > > > > - int i; > > > > > > > > - S390pciState *s = S390_PCI_HOST_BRIDGE( > > > > > > > > - object_resolve_path(TYPE_S390_PCI_HOST_BRIDGE, NULL)); > > > > > > > > + BusChild *kid; > > > > > > > > + S390pciState *state; > > > > > > > > + PCIFacility *s = PCI_FACILITY( > > > > > > > > + object_resolve_path(TYPE_PCI_FACILITY, NULL)); > > > > > > > > > > > > > > > > - if (!s) { > > > > > > > > - return NULL; > > > > > > > > - } > > > > > > > > - > > > > > > > > - for (i = 0; i < PCI_SLOT_MAX; i++) { > > > > > > > > - pbdev = &s->pbdev[i]; > > > > > > > > - if ((pbdev->fh != 0) && (pbdev->fid == fid)) { > > > > > > > > - return pbdev; > > > > > > > > + QTAILQ_FOREACH(kid, &s->sbus.qbus.children, sibling) { > > > > > > > > + state = (S390pciState *)kid->child; > > > > > > > > + if ((state->pbdev[0].fh != 0) && (state->pbdev[0].fid > > > > > > > > == fid)) { > > > > > > > > + return &state->pbdev[0]; > > > > > > > > } > > > > > > > > } > > > > > > > > > > > > > > > > @@ -125,37 +113,23 @@ void s390_pci_sclp_configure(int > > > > > > > > configure, SCCB *sccb) > > > > > > > > return; > > > > > > > > } > > > > > > > > > > > > > > > > -static uint32_t s390_pci_get_pfid(PCIDevice *pdev) > > > > > > > > -{ > > > > > > > > - return PCI_SLOT(pdev->devfn); > > > > > > > > -} > > > > > > > > - > > > > > > > > -static uint32_t s390_pci_get_pfh(PCIDevice *pdev) > > > > > > > > -{ > > > > > > > > - return PCI_SLOT(pdev->devfn) | FH_VIRT; > > > > > > > > -} > > > > > > > > - > > > > > > > > S390PCIBusDevice *s390_pci_find_dev_by_idx(uint32_t idx) > > > > > > > > { > > > > > > > > - S390PCIBusDevice *pbdev; > > > > > > > > - int i; > > > > > > > > + BusChild *kid; > > > > > > > > int j = 0; > > > > > > > > - S390pciState *s = S390_PCI_HOST_BRIDGE( > > > > > > > > - object_resolve_path(TYPE_S390_PCI_HOST_BRIDGE, NULL)); > > > > > > > > - > > > > > > > > - if (!s) { > > > > > > > > - return NULL; > > > > > > > > - } > > > > > > > > + S390pciState *state; > > > > > > > > + PCIFacility *s = PCI_FACILITY( > > > > > > > > + object_resolve_path(TYPE_PCI_FACILITY, NULL)); > > > > > > > > > > > > > > > > - for (i = 0; i < PCI_SLOT_MAX; i++) { > > > > > > > > - pbdev = &s->pbdev[i]; > > > > > > > > + QTAILQ_FOREACH(kid, &s->sbus.qbus.children, sibling) { > > > > > > > > + state = (S390pciState *)kid->child; > > > > > > > > > > > > > > > > - if (pbdev->fh == 0) { > > > > > > > > + if (state->pbdev[0].fh == 0) { > > > > > > > > continue; > > > > > > > > } > > > > > > > > > > > > > > > > if (j == idx) { > > > > > > > > - return pbdev; > > > > > > > > + return &state->pbdev[0]; > > > > > > > > } > > > > > > > > j++; > > > > > > > > } > > > > > > > > @@ -165,19 +139,19 @@ S390PCIBusDevice > > > > > > > > *s390_pci_find_dev_by_idx(uint32_t idx) > > > > > > > > > > > > > > > > S390PCIBusDevice *s390_pci_find_dev_by_fh(uint32_t fh) > > > > > > > > { > > > > > > > > - S390PCIBusDevice *pbdev; > > > > > > > > - int i; > > > > > > > > - S390pciState *s = S390_PCI_HOST_BRIDGE( > > > > > > > > - object_resolve_path(TYPE_S390_PCI_HOST_BRIDGE, NULL)); > > > > > > > > + BusChild *kid; > > > > > > > > + S390pciState *state; > > > > > > > > + PCIFacility *s = PCI_FACILITY( > > > > > > > > + object_resolve_path(TYPE_PCI_FACILITY, NULL)); > > > > > > > > > > > > > > > > - if (!s || !fh) { > > > > > > > > + if (!fh) { > > > > > > > > return NULL; > > > > > > > > } > > > > > > > > > > > > > > > > - for (i = 0; i < PCI_SLOT_MAX; i++) { > > > > > > > > - pbdev = &s->pbdev[i]; > > > > > > > > - if (pbdev->fh == fh) { > > > > > > > > - return pbdev; > > > > > > > > + QTAILQ_FOREACH(kid, &s->sbus.qbus.children, sibling) { > > > > > > > > + state = (S390pciState *)kid->child; > > > > > > > > + if (state->pbdev[0].fh == fh) { > > > > > > > > + return &state->pbdev[0]; > > > > > > > > } > > > > > > > > } > > > > > > > > > > > > > > > > @@ -188,12 +162,8 @@ static void > > > > > > > > s390_pci_generate_event(uint8_t cc, uint16_t pec, uint32_t fh, > > > > > > > > uint32_t fid, uint64_t > > > > > > > > faddr, uint32_t e) > > > > > > > > { > > > > > > > > SeiContainer *sei_cont; > > > > > > > > - S390pciState *s = S390_PCI_HOST_BRIDGE( > > > > > > > > - object_resolve_path(TYPE_S390_PCI_HOST_BRIDGE, NULL)); > > > > > > > > - > > > > > > > > - if (!s) { > > > > > > > > - return; > > > > > > > > - } > > > > > > > > + PCIFacility *s = PCI_FACILITY( > > > > > > > > + object_resolve_path(TYPE_PCI_FACILITY, NULL)); > > > > > > > > > > > > > > > > sei_cont = g_malloc0(sizeof(SeiContainer)); > > > > > > > > sei_cont->fh = fh; > > > > > > > > @@ -461,15 +431,29 @@ static void > > > > > > > > s390_pcihost_init_as(S390pciState *s) > > > > > > > > address_space_init(&s->msix_notify_as, &s->msix_notify_mr, > > > > > > > > "msix-pci"); > > > > > > > > } > > > > > > > > > > > > > > > > -static int s390_pcihost_init(SysBusDevice *dev) > > > > > > > > +static void s390_pcihost_realize(DeviceState *dev, Error > > > > > > > > **errp) > > > > > > > > { > > > > > > > > PCIBus *b; > > > > > > > > BusState *bus; > > > > > > > > - PCIHostState *phb = PCI_HOST_BRIDGE(dev); > > > > > > > > S390pciState *s = S390_PCI_HOST_BRIDGE(dev); > > > > > > > > + S390pciState *state; > > > > > > > > + BusChild *kid; > > > > > > > > + PCIFacility *fac = PCI_FACILITY( > > > > > > > > + object_resolve_path(TYPE_PCI_FACILITY, NULL)); > > > > > > > > > > > > > > > > DPRINTF("host_init\n"); > > > > > > > > > > > > > > > > + QTAILQ_FOREACH(kid, &fac->sbus.qbus.children, sibling) { > > > > > > > > + state = (S390pciState *)kid->child; > > > > > > > > + if (state == s) { > > > > > > > > + continue; > > > > > > > > + } > > > > > > > > + if (state->fid == s->fid || state->uid == s->uid) { > > > > > > > > + error_setg(errp, "s390-pcihost needs unique fid > > > > > > > > and uid"); > > > > > > > > + return; > > > > > > > > + } > > > > > > > > + } > > > > > > > > + > > > > > > > > b = pci_register_bus(DEVICE(dev), NULL, > > > > > > > > s390_pci_set_irq, s390_pci_map_irq, > > > > > > > > NULL, > > > > > > > > get_system_memory(), get_system_io(), > > > > > > > > 0, 64, > > > > > > > > @@ -479,9 +463,6 @@ static int s390_pcihost_init(SysBusDevice > > > > > > > > *dev) > > > > > > > > > > > > > > > > bus = BUS(b); > > > > > > > > qbus_set_hotplug_handler(bus, DEVICE(dev), NULL); > > > > > > > > - phb->bus = b; > > > > > > > > - QTAILQ_INIT(&s->pending_sei); > > > > > > > > - return 0; > > > > > > > > } > > > > > > > > > > > > > > > > static int s390_pcihost_setup_msix(S390PCIBusDevice *pbdev) > > > > > > > > @@ -520,12 +501,18 @@ static void > > > > > > > > s390_pcihost_hot_plug(HotplugHandler *hotplug_dev, > > > > > > > > S390pciState *s = > > > > > > > > S390_PCI_HOST_BRIDGE(pci_device_root_bus(pci_dev) > > > > > > > > ->qbus.parent); > > > > > > > > > > > > > > > > + if (PCI_SLOT(pci_dev->devfn) != 0) { > > > > > > > > + error_setg(errp, "s390-pcihost only slot 0 allowed."); > > > > > > > > + return; > > > > > > > > + } > > > > > > > > + > > > > > > > > pbdev = &s->pbdev[PCI_SLOT(pci_dev->devfn)]; > > > > > > > > > > > > > > > > - pbdev->fid = s390_pci_get_pfid(pci_dev); > > > > > > > > + pbdev->fid = s->fid; > > > > > > > > + pbdev->uid = s->uid; > > > > > > > > pbdev->pdev = pci_dev; > > > > > > > > pbdev->configured = true; > > > > > > > > - pbdev->fh = s390_pci_get_pfh(pci_dev); > > > > > > > > + pbdev->fh = s->fid | FH_VIRT; > > > > > > > > > > > > > > > > s390_pcihost_setup_msix(pbdev); > > > > > > > > > > > > > > > > @@ -560,14 +547,20 @@ static void > > > > > > > > s390_pcihost_hot_unplug(HotplugHandler *hotplug_dev, > > > > > > > > object_unparent(OBJECT(pci_dev)); > > > > > > > > } > > > > > > > > > > > > > > > > +static Property s390_pcihost_properties[] = { > > > > > > > > + DEFINE_PROP_UINT32("fid", S390pciState, fid, 0), > > > > > > > > + DEFINE_PROP_UINT32("uid", S390pciState, uid, 0), > > > > > > > > + DEFINE_PROP_END_OF_LIST(), > > > > > > > > +}; > > > > > > > > + > > > > > > > > static void s390_pcihost_class_init(ObjectClass *klass, void > > > > > > > > *data) > > > > > > > > { > > > > > > > > - SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass); > > > > > > > > DeviceClass *dc = DEVICE_CLASS(klass); > > > > > > > > HotplugHandlerClass *hc = HOTPLUG_HANDLER_CLASS(klass); > > > > > > > > > > > > > > > > - dc->cannot_instantiate_with_device_add_yet = true; > > > > > > > > - k->init = s390_pcihost_init; > > > > > > > > + dc->props = s390_pcihost_properties; > > > > > > > > + dc->bus_type = TYPE_PCI_FACILITY_BUS; > > > > > > > > + dc->realize = s390_pcihost_realize; > > > > > > > > hc->plug = s390_pcihost_hot_plug; > > > > > > > > hc->unplug = s390_pcihost_hot_unplug; > > > > > > > > msi_supported = true; > > > > > > > > @@ -575,7 +568,7 @@ static void > > > > > > > > s390_pcihost_class_init(ObjectClass *klass, void *data) > > > > > > > > > > > > > > > > static const TypeInfo s390_pcihost_info = { > > > > > > > > .name = TYPE_S390_PCI_HOST_BRIDGE, > > > > > > > > - .parent = TYPE_PCI_HOST_BRIDGE, > > > > > > > > + .parent = TYPE_DEVICE, > > > > > > > > .instance_size = sizeof(S390pciState), > > > > > > > > .class_init = s390_pcihost_class_init, > > > > > > > > .interfaces = (InterfaceInfo[]) { > > > > > > > > @@ -584,9 +577,46 @@ static const TypeInfo s390_pcihost_info = { > > > > > > > > } > > > > > > > > }; > > > > > > > > > > > > > > > > +static const TypeInfo pci_facility_bus_info = { > > > > > > > > + .name = TYPE_PCI_FACILITY_BUS, > > > > > > > > + .parent = TYPE_BUS, > > > > > > > > +}; > > > > > > > > + > > > > > > > > +static void pci_facility_realize(DeviceState *qdev, Error > > > > > > > > **errp) > > > > > > > > +{ > > > > > > > > + PCIFacility *facility = PCI_FACILITY(qdev); > > > > > > > > + > > > > > > > > + qbus_create_inplace(&facility->sbus, > > > > > > > > sizeof(facility->sbus), > > > > > > > > + TYPE_PCI_FACILITY_BUS, qdev, NULL); > > > > > > > > + > > > > > > > > + qbus_set_hotplug_handler(&facility->sbus.qbus, qdev, NULL); > > > > > > > > + QTAILQ_INIT(&facility->pending_sei); > > > > > > > > +} > > > > > > > > + > > > > > > > > +static void pci_facility_class_init(ObjectClass *klass, void > > > > > > > > *data) > > > > > > > > +{ > > > > > > > > + DeviceClass *dc = DEVICE_CLASS(klass); > > > > > > > > + > > > > > > > > + dc->realize = pci_facility_realize; > > > > > > > > +} > > > > > > > > + > > > > > > > > +static const TypeInfo pci_facility_info = { > > > > > > > > + .name = TYPE_PCI_FACILITY, > > > > > > > > + .parent = TYPE_SYS_BUS_DEVICE, > > > > > > > > + .instance_size = sizeof(PCIFacility), > > > > > > > > + .class_init = pci_facility_class_init, > > > > > > > > + .class_size = sizeof(PCIFacilityClass), > > > > > > > > + .interfaces = (InterfaceInfo[]) { > > > > > > > > + { TYPE_HOTPLUG_HANDLER }, > > > > > > > > + { } > > > > > > > > + } > > > > > > > > +}; > > > > > > > > + > > > > > > > > static void s390_pci_register_types(void) > > > > > > > > { > > > > > > > > type_register_static(&s390_pcihost_info); > > > > > > > > + type_register_static(&pci_facility_info); > > > > > > > > + type_register_static(&pci_facility_bus_info); > > > > > > > > } > > > > > > > > > > > > > > > > type_init(s390_pci_register_types) > > > > > > > > diff --git a/hw/s390x/s390-pci-bus.h b/hw/s390x/s390-pci-bus.h > > > > > > > > index 464a92e..78a5c83 100644 > > > > > > > > --- a/hw/s390x/s390-pci-bus.h > > > > > > > > +++ b/hw/s390x/s390-pci-bus.h > > > > > > > > @@ -220,6 +220,7 @@ typedef struct S390PCIBusDevice { > > > > > > > > bool lgstg_blocked; > > > > > > > > uint32_t fh; > > > > > > > > uint32_t fid; > > > > > > > > + uint32_t uid; > > > > > > > > uint64_t g_iota; > > > > > > > > uint64_t pba; > > > > > > > > uint64_t pal; > > > > > > > > @@ -238,7 +239,8 @@ typedef struct S390pciState { > > > > > > > > S390PCIBusDevice pbdev[PCI_SLOT_MAX]; > > > > > > > > AddressSpace msix_notify_as; > > > > > > > > MemoryRegion msix_notify_mr; > > > > > > > > - QTAILQ_HEAD(, SeiContainer) pending_sei; > > > > > > > > + uint32_t fid; > > > > > > > > + uint32_t uid; > > > > > > > > } S390pciState; > > > > > > > > > > > > > > > > int chsc_sei_nt2_get_event(void *res); > > > > > > > > @@ -248,4 +250,24 @@ S390PCIBusDevice > > > > > > > > *s390_pci_find_dev_by_idx(uint32_t idx); > > > > > > > > S390PCIBusDevice *s390_pci_find_dev_by_fh(uint32_t fh); > > > > > > > > S390PCIBusDevice *s390_pci_find_dev_by_fid(uint32_t fid); > > > > > > > > > > > > > > > > +#define TYPE_PCI_FACILITY "pci-facility" > > > > > > > > +#define TYPE_PCI_FACILITY_BUS "pci-facility-bus" > > > > > > > > + > > > > > > > > +#define PCI_FACILITY(obj) \ > > > > > > > > + OBJECT_CHECK(PCIFacility, (obj), TYPE_PCI_FACILITY) > > > > > > > > + > > > > > > > > +typedef struct PCIFacilityBus { > > > > > > > > + BusState qbus; > > > > > > > > +} PCIFacilityBus; > > > > > > > > + > > > > > > > > +typedef struct PCIFacility { > > > > > > > > + SysBusDevice parent_obj; > > > > > > > > + PCIFacilityBus sbus; > > > > > > > > + QTAILQ_HEAD(, SeiContainer) pending_sei; > > > > > > > > +} PCIFacility; > > > > > > > > + > > > > > > > > +typedef struct PCIFacilityClass { > > > > > > > > + DeviceClass parent_class; > > > > > > > > + int (*init)(PCIFacility *pf); > > > > > > > > +} PCIFacilityClass; > > > > > > > > #endif > > > > > > > > diff --git a/hw/s390x/s390-pci-inst.c b/hw/s390x/s390-pci-inst.c > > > > > > > > index 08d8aa6..d138b28 100644 > > > > > > > > --- a/hw/s390x/s390-pci-inst.c > > > > > > > > +++ b/hw/s390x/s390-pci-inst.c > > > > > > > > @@ -254,7 +254,7 @@ int clp_service_call(S390CPU *cpu, uint8_t > > > > > > > > r2) > > > > > > > > stq_p(&resquery->edma, ZPCI_EDMA_ADDR); > > > > > > > > stw_p(&resquery->pchid, 0); > > > > > > > > stw_p(&resquery->ug, 1); > > > > > > > > - stl_p(&resquery->uid, pbdev->fid); > > > > > > > > + stl_p(&resquery->uid, pbdev->uid); > > > > > > > > stw_p(&resquery->hdr.rsp, CLP_RC_OK); > > > > > > > > break; > > > > > > > > } > > > > > > > > diff --git a/hw/s390x/s390-virtio-ccw.c > > > > > > > > b/hw/s390x/s390-virtio-ccw.c > > > > > > > > index 8f0ae59..358b192 100644 > > > > > > > > --- a/hw/s390x/s390-virtio-ccw.c > > > > > > > > +++ b/hw/s390x/s390-virtio-ccw.c > > > > > > > > @@ -129,8 +129,8 @@ static void ccw_init(MachineState *machine) > > > > > > > > machine->initrd_filename, > > > > > > > > "s390-ccw.img", true); > > > > > > > > s390_flic_init(); > > > > > > > > > > > > > > > > - dev = qdev_create(NULL, TYPE_S390_PCI_HOST_BRIDGE); > > > > > > > > - object_property_add_child(qdev_get_machine(), > > > > > > > > TYPE_S390_PCI_HOST_BRIDGE, > > > > > > > > + dev = qdev_create(NULL, TYPE_PCI_FACILITY); > > > > > > > > + object_property_add_child(qdev_get_machine(), > > > > > > > > TYPE_PCI_FACILITY, > > > > > > > > OBJECT(dev), NULL); > > > > > > > > qdev_init_nofail(dev); > > > > > > > > > > > > > > > > -- > > > > > > > > 2.1.4 > > > > > > > > > > > > > > > > > > >