On Fri, 2015-04-17 at 17:31 +0200, Eric Auger wrote:
> Hi Alex,
> On 04/17/2015 12:04 AM, Alex Williamson wrote:
> > On Thu, 2015-03-19 at 17:16 +0000, Eric Auger wrote:
> >> Add a reset notify function that enables to start the propagation of
> >> interrupts to the guest.
> >>
> >> Signed-off-by: Eric Auger <eric.au...@linaro.org>
> >>
> >> ---
> >> v10 -> v11:
> >> - comment reword
> >>
> >> v8 -> v9:
> >> - handle failure in vfio_irq_starter
> >> ---
> >> hw/vfio/platform.c | 64
> >> +++++++++++++++++++++++++++++++++++++++++
> >> include/hw/vfio/vfio-platform.h | 8 ++++++
> >> 2 files changed, 72 insertions(+)
> >>
> >> diff --git a/hw/vfio/platform.c b/hw/vfio/platform.c
> >> index 31c2701..361e01b 100644
> >> --- a/hw/vfio/platform.c
> >> +++ b/hw/vfio/platform.c
> >> @@ -572,6 +572,70 @@ static void vfio_platform_realize(DeviceState *dev,
> >> Error **errp)
> >> }
> >> }
> >>
> >> +/**
> >> + * vfio_irq_starter: Start IRQ forwarding for a specific VFIO device
> >> + * @sbdev: Sysbus device handle
> >> + * @opaque: DeviceState handle of the interrupt controller the device
> >> + * is attached to
> >> + *
> >> + * The function retrieves the absolute GSI number each VFIO IRQ
> >> + * corresponds to and start forwarding.
> >> + */
> >
> > Using "forwarding" here is really making me look for your platform's EOI
> > trick (IRQ Forwarding), which isn't here.
> sure
> >
> >> +static int vfio_irq_starter(SysBusDevice *sbdev, void *opaque)
> >> +{
> >> + DeviceState *intc = (DeviceState *)opaque;
> >> + VFIOPlatformDevice *vdev;
> >> + VFIOINTp *intp;
> >> + qemu_irq irq;
> >> + int gsi, ret;
> >> +
> >> + if (object_dynamic_cast(OBJECT(sbdev), TYPE_VFIO_PLATFORM)) {
> >> + vdev = VFIO_PLATFORM_DEVICE(sbdev);
> >> +
> >> + QLIST_FOREACH(intp, &vdev->intp_list, next) {
> >> + gsi = 0;
> >> + while (1) {
> >> + irq = qdev_get_gpio_in(intc, gsi);
> >> + if (irq == intp->qemuirq) {
> >> + break;
> >> + }
> >> + gsi++;
> >> + }
> >
> > A for() loop would be more compact here, but is there some other exit
> > condition we can add? gsi < INT_MAX?
> Currently I do not see any way to retrieve the number of input GPIOs.
> This is static in core/qdev.c. either I leave as is or introduce getters.
Well, INT_MAX is always an option, right? I prefer the way vfio-pci is
structured where we can ask for the gsi routing via
pci_device_route_intx_to_irq() rather than searching the entire address
space. Can we do something similar on platform to pass in a qemuirq and
get back a gsi?
> >> + intp->virtualID = gsi;
> >> + ret = vdev->start_irq_fn(intp);
> >> + if (ret) {
> >> + error_report("%s unable to start propagation of IRQ index
> >> %d",
> >> + vdev->vbasedev.name, intp->pin);
> >> + exit(1);
> >> + }
> >> + }
> >> + }
> >> + return 0;
> >> +}
> >> +
> >> +/**
> >> + * vfio_kick_irqs: start IRQ forwarding for all the VFIO devices
> >> + * attached to the platform bus
> >> + * @data: Device state handle of the interrupt controller the VFIO IRQs
> >> + * must be bound to
> >> + *
> >> + * Binding to the platform bus IRQs happens on a machine init done
> >> + * notifier registered by the platform bus. Only at that time the
> >> + * absolute virtual IRQ = GSI is known and allows to setup IRQFD.
> >> + * This function typically can be called in a reset notifier registered
> >> + * by the machine file.
> >> + */
> >
> > So there's not actually an irqfd setup done here yet and what is
> > currently done by the above starter function doesn't depend at all on
> > the GSI. Do you perhaps want to setup the vfio->eventfd signaling
> > during your initfn and then only connect the eventfd->irqfd to KVM in
> > the reset function? Sort of how vfio-pci does the routing update.
>
> Not sure I get what you mean here. In above starter I call start_irq_fn.
> This latter starts the injection depending on the chosen technique, 1)
> user side handling, 2) standalone irqfd, 2) irqfd + ARM forwarding.
> For starting 2) and 3) I actually use the GSI set above by
> intp->virtualID = gsi;
> See vfio_start_irqfd_injection.
>
> Indeed I noticed in VFIO-PCI you first started eventfd and then irqfd
> but I thought I did not need to do that. What is the problem starting
> VFIO signaling on reset (notifier) only? Besides, moving back to 2-step
> settup would not fix my issue of being able to know the gsi to attach to
> my irqfd. I need to further investigate this PCI INTx routing notifier...
vfio-pci effectively has the same issue. PCI supports supports four
legacy interrupt lines and we know which of those interrupt lines the
device uses during the initfn, but we don't know the GSI that the PCI
line maps to until later. In our case it's not just system reset, but
the guest can manipulate the mapping runtime via emulated platform
chipset registers. vfio-pci also attempts to handle KVM acceleration as
optional, enabling userspace signaling first, then augmenting it with an
irqfd fast path. We should be able to handle a failure on the
acceleration path without calling exit() to kill the VM and it would be
cleaner for the initfn to fail if we can't setup basic signaling via
eventfd.
Expecting to be able to configure both basic signaling and acceleration
at the same time seems to be contributing to this reset notifier hack
that I'm not a fan of. vfio-platform could register it's own reset
notifier, or perhaps a machine_init_done notifier if a path was setup
where vfio-platform could query the gsi, as I suggest above. Thanks,
Alex
> >> +void vfio_kick_irqs(void *data)
> >> +{
> >> + DeviceState *intc = (DeviceState *)data;
> >> + DeviceState *dev =
> >> + qdev_find_recursive(sysbus_get_default(),
> >> TYPE_PLATFORM_BUS_DEVICE);
> >> + PlatformBusDevice *pbus = PLATFORM_BUS_DEVICE(dev);
> >> +
> >> + assert(pbus->done_gathering);
> >> + foreach_dynamic_sysbus_device(vfio_irq_starter, intc);
> >> +}
> >> +
> >> static const VMStateDescription vfio_platform_vmstate = {
> >> .name = TYPE_VFIO_PLATFORM,
> >> .unmigratable = 1,
> >> diff --git a/include/hw/vfio/vfio-platform.h
> >> b/include/hw/vfio/vfio-platform.h
> >> index 31893a3..c9ee898 100644
> >> --- a/include/hw/vfio/vfio-platform.h
> >> +++ b/include/hw/vfio/vfio-platform.h
> >> @@ -77,4 +77,12 @@ typedef struct VFIOPlatformDeviceClass {
> >> #define VFIO_PLATFORM_DEVICE_GET_CLASS(obj) \
> >> OBJECT_GET_CLASS(VFIOPlatformDeviceClass, (obj), TYPE_VFIO_PLATFORM)
> >>
> >> +/**
> >> + * vfio_kick_irqs - reset notifier that starts IRQ injection
> >> + * for all VFIO dynamic sysbus devices attached to the platform bus.
> >> + *
> >> + * @opaque: handle to the interrupt controller DeviceState
> >> + */
> >> +void vfio_kick_irqs(void *opaque);
> >> +
> >> #endif /*HW_VFIO_VFIO_PLATFORM_H*/
> >
> >
> >
>
