This patch add initial support of VIA IDE controller used by fulong mini pc
Signed-off-by: Huacai Chen <zltjiang...@gmail.com>
-----
diff --git a/Makefile.objs b/Makefile.objs
index ecdd53e..75be9ce 100644
--- a/Makefile.objs
+++ b/Makefile.objs
@@ -195,6 +195,7 @@ hw-obj-$(CONFIG_IDE_ISA) += ide/isa.o
hw-obj-$(CONFIG_IDE_PIIX) += ide/piix.o
hw-obj-$(CONFIG_IDE_CMD646) += ide/cmd646.o
hw-obj-$(CONFIG_IDE_MACIO) += ide/macio.o
+hw-obj-$(CONFIG_IDE_VIA) += ide/via.o
# SCSI layer
hw-obj-y += lsi53c895a.o
diff --git a/default-configs/mips-softmmu.mak b/default-configs/mips-softmmu.mak
index 7793dbc..02fea47 100644
--- a/default-configs/mips-softmmu.mak
+++ b/default-configs/mips-softmmu.mak
@@ -18,6 +18,7 @@ CONFIG_IDE_QDEV=y
CONFIG_IDE_PCI=y
CONFIG_IDE_ISA=y
CONFIG_IDE_PIIX=y
+CONFIG_IDE_VIA=y
CONFIG_NE2000_ISA=y
CONFIG_SOUND=y
CONFIG_VIRTIO_PCI=y
diff --git a/default-configs/mips64-softmmu.mak
b/default-configs/mips64-softmmu.mak
index aa65d92..8c13da6 100644
--- a/default-configs/mips64-softmmu.mak
+++ b/default-configs/mips64-softmmu.mak
@@ -18,6 +18,7 @@ CONFIG_IDE_QDEV=y
CONFIG_IDE_PCI=y
CONFIG_IDE_ISA=y
CONFIG_IDE_PIIX=y
+CONFIG_IDE_VIA=y
CONFIG_NE2000_ISA=y
CONFIG_SOUND=y
CONFIG_VIRTIO_PCI=y
diff --git a/default-configs/mips64el-softmmu.mak
b/default-configs/mips64el-softmmu.mak
index b9b8c71..7e3a5ef 100644
--- a/default-configs/mips64el-softmmu.mak
+++ b/default-configs/mips64el-softmmu.mak
@@ -18,6 +18,7 @@ CONFIG_IDE_QDEV=y
CONFIG_IDE_PCI=y
CONFIG_IDE_ISA=y
CONFIG_IDE_PIIX=y
+CONFIG_IDE_VIA=y
CONFIG_NE2000_ISA=y
CONFIG_SOUND=y
CONFIG_VIRTIO_PCI=y
diff --git a/default-configs/mipsel-softmmu.mak
b/default-configs/mipsel-softmmu.mak
index e14831e..c329fb2 100644
--- a/default-configs/mipsel-softmmu.mak
+++ b/default-configs/mipsel-softmmu.mak
@@ -18,6 +18,7 @@ CONFIG_IDE_QDEV=y
CONFIG_IDE_PCI=y
CONFIG_IDE_ISA=y
CONFIG_IDE_PIIX=y
+CONFIG_IDE_VIA=y
CONFIG_NE2000_ISA=y
CONFIG_SOUND=y
CONFIG_VIRTIO_PCI=y
diff --git a/hw/ide.h b/hw/ide.h
index 0e7d540..bb635b6 100644
--- a/hw/ide.h
+++ b/hw/ide.h
@@ -12,6 +12,7 @@ void pci_cmd646_ide_init(PCIBus *bus, DriveInfo **hd_table,
int secondary_ide_enabled);
void pci_piix3_ide_init(PCIBus *bus, DriveInfo **hd_table, int devfn);
void pci_piix4_ide_init(PCIBus *bus, DriveInfo **hd_table, int devfn);
+void vt82c686b_ide_init(PCIBus *bus, DriveInfo **hd_table, int devfn);
/* ide-macio.c */
int pmac_ide_init (DriveInfo **hd_table, qemu_irq irq,
diff --git a/hw/ide/via.c b/hw/ide/via.c
new file mode 100644
index 0000000..9adc5b5
--- /dev/null
+++ b/hw/ide/via.c
@@ -0,0 +1,189 @@
+/*
+ * QEMU IDE Emulation: PCI VIA82C686B support.
+ *
+ * Copyright (c) 2003 Fabrice Bellard
+ * Copyright (c) 2006 Openedhand Ltd.
+ * Copyright (c) 2010 Huacai Chen <zltjiang...@gmail.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the
"Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+#include <hw/hw.h>
+#include <hw/pc.h>
+#include <hw/pci.h>
+#include <hw/isa.h>
+#include "block.h"
+#include "block_int.h"
+#include "sysemu.h"
+#include "dma.h"
+
+#include <hw/ide/pci.h>
+
+static uint32_t bmdma_readb(void *opaque, uint32_t addr)
+{
+ BMDMAState *bm = opaque;
+ uint32_t val;
+
+ switch(addr & 3) {
+ case 0:
+ val = bm->cmd;
+ break;
+ case 2:
+ val = bm->status;
+ break;
+ default:
+ val = 0xff;
+ break;
+ }
+#ifdef DEBUG_IDE
+ printf("bmdma: readb 0x%02x : 0x%02x\n", addr, val);
+#endif
+ return val;
+}
+
+static void bmdma_writeb(void *opaque, uint32_t addr, uint32_t val)
+{
+ BMDMAState *bm = opaque;
+#ifdef DEBUG_IDE
+ printf("bmdma: writeb 0x%02x : 0x%02x\n", addr, val);
+#endif
+ switch(addr & 3) {
+ case 2:
+ bm->status = (val & 0x60) | (bm->status & 1) | (bm->status &
~val & 0x06);
+ break;
+ }
+}
+
+static void bmdma_map(PCIDevice *pci_dev, int region_num,
+ pcibus_t addr, pcibus_t size, int type)
+{
+ PCIIDEState *d = DO_UPCAST(PCIIDEState, dev, pci_dev);
+ int i;
+
+ for(i = 0;i < 2; i++) {
+ BMDMAState *bm = &d->bmdma[i];
+ d->bus[i].bmdma = bm;
+ bm->bus = d->bus+i;
+ qemu_add_vm_change_state_handler(ide_dma_restart_cb, bm);
+
+ register_ioport_write(addr, 1, 1, bmdma_cmd_writeb, bm);
+
+ register_ioport_write(addr + 1, 3, 1, bmdma_writeb, bm);
+ register_ioport_read(addr, 4, 1, bmdma_readb, bm);
+
+ register_ioport_write(addr + 4, 4, 1, bmdma_addr_writeb, bm);
+ register_ioport_read(addr + 4, 4, 1, bmdma_addr_readb, bm);
+ register_ioport_write(addr + 4, 4, 2, bmdma_addr_writew, bm);
+ register_ioport_read(addr + 4, 4, 2, bmdma_addr_readw, bm);
+ register_ioport_write(addr + 4, 4, 4, bmdma_addr_writel, bm);
+ register_ioport_read(addr + 4, 4, 4, bmdma_addr_readl, bm);
+ addr += 8;
+ }
+}
+
+static void via_reset(void *opaque)
+{
+ PCIIDEState *d = opaque;
+ uint8_t *pci_conf = d->dev.config;
+ int i;
+
+ for (i = 0; i < 2; i++) {
+ ide_bus_reset(&d->bus[i]);
+ ide_dma_reset(&d->bmdma[i]);
+ }
+
+ /* TODO: this is the default. do not override. */
+ pci_conf[PCI_COMMAND] = 0x80;
+ /* TODO: this is the default. do not override. */
+ pci_conf[PCI_COMMAND + 1] = 0x00;
+ /* TODO: use pci_set_word */
+ pci_conf[PCI_STATUS] = PCI_STATUS_FAST_BACK;
+ pci_conf[PCI_STATUS + 1] = PCI_STATUS_DEVSEL_MEDIUM >> 8;
+
+ pci_set_long(pci_conf + PCI_BASE_ADDRESS_0, 0x000001f0);
+ pci_set_long(pci_conf + PCI_BASE_ADDRESS_1, 0x000003f6);
+ pci_set_long(pci_conf + PCI_BASE_ADDRESS_2, 0x00000170);
+ pci_set_long(pci_conf + PCI_BASE_ADDRESS_3, 0x00000376);
+ pci_set_long(pci_conf + PCI_BASE_ADDRESS_4, 0x0000cc01); /*
BMIBA: 20-23h */
+ pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0);
+ pci_set_long(pci_conf + PCI_INTERRUPT_LINE, 0x0000010e);
+ pci_set_long(pci_conf + 0x40, 0x0a090208);
+ pci_set_long(pci_conf + 0x44, 0x00c00068);
+ pci_set_long(pci_conf + 0x48, 0xa8a8a8a8);
+ pci_set_long(pci_conf + 0x4c, 0x000000ff);
+ pci_set_long(pci_conf + 0x50, 0x07070707);
+ pci_set_long(pci_conf + 0x54, 0x00000004);
+ pci_set_long(pci_conf + 0x60, 0x00000200);
+ pci_set_long(pci_conf + 0x68, 0x00000200);
+ pci_set_long(pci_conf + 0xc0, 0x00020001);
+}
+
+/*via ide func*/
+static int vt82c686b_ide_initfn(PCIDevice *dev)
+{
+ PCIIDEState *d = DO_UPCAST(PCIIDEState, dev, dev);;
+ uint8_t *pci_conf = d->dev.config;
+
+ pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_VIA);
+ pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_VIA_IDE);
+ pci_config_set_class(pci_conf, PCI_CLASS_STORAGE_IDE);
+ pci_config_set_prog_interface(pci_conf, 0x8a); // legacy ATA mode
+ pci_config_set_revision(pci_conf,0x06); /* Revision 0.6 */
+ pci_conf[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL; // header_type
+
+ qemu_register_reset(via_reset, d);
+ pci_register_bar((PCIDevice *)d, 4, 0x10,
+ PCI_BASE_ADDRESS_SPACE_IO, bmdma_map);
+
+ vmstate_register(0, &vmstate_ide_pci, d);
+
+ ide_bus_new(&d->bus[0], &d->dev.qdev);
+ ide_bus_new(&d->bus[1], &d->dev.qdev);
+ ide_init2(&d->bus[0], NULL, NULL, isa_reserve_irq(14));
+ ide_init2(&d->bus[1], NULL, NULL, isa_reserve_irq(15));
+ ide_init_ioport(&d->bus[0], 0x1f0, 0x3f6);
+ ide_init_ioport(&d->bus[1], 0x170, 0x376);
+
+ return 0;
+}
+
+void vt82c686b_ide_init(PCIBus *bus, DriveInfo **hd_table, int devfn)
+{
+ PCIDevice *dev;
+
+ dev = pci_create_simple(bus, devfn, "via-ide");
+ pci_ide_create_devs(dev, hd_table);
+}
+
+static PCIDeviceInfo via_ide_info[] = {
+ {
+ .qdev.name = "via-ide",
+ .qdev.size = sizeof(PCIIDEState),
+ .qdev.no_user = 1,
+ .init = vt82c686b_ide_initfn,
+ },{
+ /* end of list */
+ }
+};
+
+static void via_ide_register(void)
+{
+ pci_qdev_register_many(via_ide_info);
+}
+device_init(via_ide_register);
+
-----
--
Huacai Chen
