On Sat, Oct 03, 2015 at 07:28:05PM -0400, Gabriel L. Somlo wrote: > From: "Gabriel Somlo" <so...@cmu.edu> > > Allow access to QEMU firmware blobs, passed into the guest VM via > the fw_cfg device, through SysFS entries. Blob meta-data (e.g. name, > size, and fw_cfg key), as well as the raw binary blob data may be > accessed. > > The SysFS access location is /sys/firmware/qemu_fw_cfg/... and was > selected based on overall similarity to the type of information > exposed under /sys/firmware/dmi/entries/...
What is the intended use of these? Some of the keys in the example look like they'd come from other sources (e.g. the *-tables entries), while others look like kernel/bootloader configuration options (e.g. etc/boot-fail-wait, bootorder) -- I'm concerned about redundancy here. > NEW (since v2): Using ACPI to detect the presence and details of the > fw_cfg virtual hardware device. > > Device Tree has been suggested by Ard as a comment on v2 of this > patch, but after some deliberation I decided to go with ACPI, > since it's supported on both x86 and some (uefi-enabled) versions > of aarch64. I really don't see how I'd reasonably use *both* DT (on > ARM) *and* ACPI (on x86), and after all I'm mostly concerned with > x86, but originally wanted to maximize portability (which is where > the register probing in earlier versions came from). There are defintitely going to be arm64 VMs that don't use ACPI, so we may need DT support depending on what the intended use is. I'm not sure I follow what the difficulty with supporting DT in addition to ACPI is? It looks like all you need is a compatible string and a reg entry. Thanks, Mark. > A patch set generating an ACPI device node for qemu's fw_cfg is > currently under review on the qemu-devel list: > > http://lists.nongnu.org/archive/html/qemu-devel/2015-09/msg06946.html > (sorry, gmane appears down at the moment...) > > In consequence: > > - Patch 1/4 is mostly the same as in v2; > - Patch 2/4 switches device initialization from register > probing to using ACPI; this is a separate patch only to > illustrate the transition from probing to ACPI, and I'm > assuming it will end up squashed on top of patch 1/4 in > the final version. > > - Patches 3/4 and 4/4 add a "human-readable" directory > hierarchy built from tokenizing fw_cfg blob names into > '/'-separated components, with symlinks to each 'by_key' > blob folder (same as in earlier versions). At Greg's > suggestion I tried to build this folder hierarchy and > leaf symlinks using udev rules, but so far I haven't been > successful in figuring that out. If udev turns out to > be applicable after all, these two patches can be dropped > from this series. > > In other words, patches 1 and 2 give us the following "by_key" listing > of blobs contained in the qemu fw_cfg device (example pulled from a PC > qemu guest running Fedora 22), with the value of each "name" attribute > shown on the right: > > $ tree /sys/firmware/qemu_fw_cfg/ > /sys/firmware/qemu_fw_cfg/ > |-- by_key > | |-- 32 > | | |-- key > | | |-- name ("etc/boot-fail-wait") > | | |-- raw > | | `-- size > | |-- 33 > | | |-- key > | | |-- name ("etc/smbios/smbios-tables") > | | |-- raw > | | `-- size > | |-- 34 > | | |-- key > | | |-- name ("etc/smbios/smbios-anchor") > | | |-- raw > | | `-- size > | |-- 35 > | | |-- key > | | |-- name ("etc/e820") > | | |-- raw > | | `-- size > | |-- 36 > | | |-- key > | | |-- name ("genroms/kvmvapic.bin") > | | |-- raw > | | `-- size > | |-- 37 > | | |-- key > | | |-- name ("etc/system-states") > | | |-- raw > | | `-- size > | |-- 38 > | | |-- key > | | |-- name ("etc/acpi/tables") > | | |-- raw > | | `-- size > | |-- 39 > | | |-- key > | | |-- name ("etc/table-loader") > | | |-- raw > | | `-- size > | |-- 40 > | | |-- key > | | |-- name ("etc/tpm/log") > | | |-- raw > | | `-- size > | |-- 41 > | | |-- key > | | |-- name ("etc/acpi/rsdp") > | | |-- raw > | | `-- size > | `-- 42 > | |-- key > | |-- name ("bootorder") > | |-- raw > | `-- size > | > ... > > Additionally, patches 3 and 4 (mostly 4) give us the following > "user friendly" directory hierarchy as a complement to the above, > based on tokenizing each blob name into symlink-tipped (sub)directories: > > ... > |-- by_name > | |-- bootorder -> ../by_key/42 > | |-- etc > | | |-- acpi > | | | |-- rsdp -> ../../../by_key/41 > | | | `-- tables -> ../../../by_key/38 > | | |-- boot-fail-wait -> ../../by_key/32 > | | |-- e820 -> ../../by_key/35 > | | |-- smbios > | | | |-- smbios-anchor -> ../../../by_key/34 > | | | `-- smbios-tables -> ../../../by_key/33 > | | |-- system-states -> ../../by_key/37 > | | |-- table-loader -> ../../by_key/39 > | | `-- tpm > | | `-- log -> ../../../by_key/40 > | `-- genroms > | `-- kvmvapic.bin -> ../../by_key/36 > `-- rev > > The trick is to figure out how to replace patches 3 and 4 with a > udev rule that would read the contents of each "name" attribute, > and build the "by_name" hierarchy and symlinks in userspace. > > I tried: > > $ udevadm info -a -p /sys/firmware/qemu_fw_cfg/by_key/33 > > looking at device '/firmware/qemu_fw_cfg/by_key/33': > KERNEL=="33" > SUBSYSTEM=="" > DRIVER=="" > ATTR{key}=="33" > ATTR{name}=="etc/smbios/smbios-tables" > ATTR{size}=="388" > > looking at parent device '/firmware/qemu_fw_cfg/by_key': > KERNELS=="by_key" > SUBSYSTEMS=="" > DRIVERS=="" > > looking at parent device '/firmware/qemu_fw_cfg': > KERNELS=="qemu_fw_cfg" > SUBSYSTEMS=="" > DRIVERS=="" > ATTRS{rev}=="1" > > Then I tried creating a file, /usr/lib/udev/rules.d/99-qemu-fw-cfg.rules > containing the following line: > > KERNELS=="qemu_fw_cfg", ATTRS{rev}=="1", SYMLINK="%p/%s{name}" > > but NOTHING happens when I insert/remove qemu_fw_cfg.ko. I also tried: > > KERNELS=="qemu_fw_cfg", ATTRS{rev}=="1", PROGRAM="/foo %k" > > where "/foo" basically did "echo $* > /tmp/bar", but no /tmp/bar file ever > showed up as a consequence of inserting/removing the qemu_fw_cfg.ko module. > > At this point, I need help figuring out whether udev is really what would > get the second, user-friendly, "by_name" /sysfs directory tree created, > and how I'd go about that... > > Thanks much, > --Gabriel > > Gabriel Somlo (4): > firmware: introduce sysfs driver for QEMU's fw_cfg device > firmware: use acpi to detect QEMU fw_cfg device for sysfs fw_cfg > driver > kobject: export kset_find_obj() for module use > firmware: create directory hierarchy for sysfs fw_cfg entries > > .../ABI/testing/sysfs-firmware-qemu_fw_cfg | 213 ++++++++ > drivers/firmware/Kconfig | 10 + > drivers/firmware/Makefile | 1 + > drivers/firmware/qemu_fw_cfg.c | 575 > +++++++++++++++++++++ > lib/kobject.c | 1 + > 5 files changed, 800 insertions(+) > create mode 100644 Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg > create mode 100644 drivers/firmware/qemu_fw_cfg.c > > -- > 2.4.3 >
