This replaces most fprintf(stderr) calls on vl.c with error_report(). The trailing newlines, "qemu:" and "error:" message prefixes were removed.
The only remaining fprintf(stderr) calls are the ones at qemu_kill_report(), because the error mesage is split in multiple fprintf() calls. Signed-off-by: Eduardo Habkost <ehabk...@redhat.com> --- Not sure if this is appropriate post soft-freeze, but if we are going to apply the max-cpus patch from Drew before 2.5.0, we could simply change all the fprintf() calls in a single step. --- vl.c | 228 +++++++++++++++++++++++++++++++++---------------------------------- 1 file changed, 112 insertions(+), 116 deletions(-) diff --git a/vl.c b/vl.c index dffaf09..db4a1f5 100644 --- a/vl.c +++ b/vl.c @@ -674,9 +674,9 @@ void runstate_set(RunState new_state) assert(new_state < RUN_STATE_MAX); if (!runstate_valid_transitions[current_run_state][new_state]) { - fprintf(stderr, "ERROR: invalid runstate transition: '%s' -> '%s'\n", - RunState_lookup[current_run_state], - RunState_lookup[new_state]); + error_report("invalid runstate transition: '%s' -> '%s'", + RunState_lookup[current_run_state], + RunState_lookup[new_state]); abort(); } trace_runstate_set(new_state); @@ -828,8 +828,8 @@ static void configure_rtc_date_offset(const char *startdate, int legacy) rtc_start_date = mktimegm(&tm); if (rtc_start_date == -1) { date_fail: - fprintf(stderr, "Invalid date format. Valid formats are:\n" - "'2006-06-17T16:01:21' or '2006-06-17'\n"); + error_report("Invalid date format. Valid formats are:\n" + "'2006-06-17T16:01:21' or '2006-06-17'"); exit(1); } rtc_date_offset = qemu_time() - rtc_start_date; @@ -859,7 +859,7 @@ static void configure_rtc(QemuOpts *opts) } else if (!strcmp(value, "vm")) { rtc_clock = QEMU_CLOCK_VIRTUAL; } else { - fprintf(stderr, "qemu: invalid option value '%s'\n", value); + error_report("invalid option value '%s'", value); exit(1); } } @@ -879,7 +879,7 @@ static void configure_rtc(QemuOpts *opts) } else if (!strcmp(value, "none")) { /* discard is default */ } else { - fprintf(stderr, "qemu: invalid option value '%s'\n", value); + error_report("invalid option value '%s'", value); exit(1); } } @@ -905,7 +905,7 @@ static int bt_hci_parse(const char *str) bdaddr_t bdaddr; if (nb_hcis >= MAX_NICS) { - fprintf(stderr, "qemu: Too many bluetooth HCIs (max %i).\n", MAX_NICS); + error_report("Too many bluetooth HCIs (max %i).", MAX_NICS); return -1; } @@ -931,8 +931,8 @@ static void bt_vhci_add(int vlan_id) struct bt_scatternet_s *vlan = qemu_find_bt_vlan(vlan_id); if (!vlan->slave) - fprintf(stderr, "qemu: warning: adding a VHCI to " - "an empty scatternet %i\n", vlan_id); + error_report("warning: adding a VHCI to " + "an empty scatternet %i", vlan_id); bt_vhci_init(bt_new_hci(vlan)); } @@ -950,7 +950,7 @@ static struct bt_device_s *bt_device_add(const char *opt) if (endp) { vlan_id = strtol(endp + 6, &endp, 0); if (*endp) { - fprintf(stderr, "qemu: unrecognised bluetooth vlan Id\n"); + error_report("unrecognised bluetooth vlan Id"); return 0; } } @@ -958,13 +958,13 @@ static struct bt_device_s *bt_device_add(const char *opt) vlan = qemu_find_bt_vlan(vlan_id); if (!vlan->slave) - fprintf(stderr, "qemu: warning: adding a slave device to " - "an empty scatternet %i\n", vlan_id); + error_report("warning: adding a slave device to " + "an empty scatternet %i", vlan_id); if (!strcmp(devname, "keyboard")) return bt_keyboard_init(vlan); - fprintf(stderr, "qemu: unsupported bluetooth device `%s'\n", devname); + error_report("unsupported bluetooth device `%s'", devname); return 0; } @@ -987,11 +987,11 @@ static int bt_parse(const char *opt) if (strstart(endp, ",vlan=", &p)) { vlan = strtol(p, (char **) &endp, 0); if (*endp) { - fprintf(stderr, "qemu: bad scatternet '%s'\n", p); + error_report("bad scatternet '%s'", p); return 1; } } else { - fprintf(stderr, "qemu: bad parameter '%s'\n", endp + 1); + error_report("bad parameter '%s'", endp + 1); return 1; } } else @@ -1003,7 +1003,7 @@ static int bt_parse(const char *opt) } else if (strstart(opt, "device:", &endp)) return !bt_device_add(endp); - fprintf(stderr, "qemu: bad bluetooth parameter '%s'\n", opt); + error_report("bad bluetooth parameter '%s'", opt); return 1; } @@ -1220,18 +1220,19 @@ static void smp_parse(QemuOpts *opts) } else if (threads == 0) { threads = cpus / (cores * sockets); } else if (sockets * cores * threads < cpus) { - fprintf(stderr, "cpu topology: error: " - "sockets (%u) * cores (%u) * threads (%u) < " - "smp_cpus (%u)\n", - sockets, cores, threads, cpus); + error_report("cpu topology: " + "sockets (%u) * cores (%u) * threads (%u) < " + "smp_cpus (%u)", + sockets, cores, threads, cpus); exit(1); } max_cpus = qemu_opt_get_number(opts, "maxcpus", cpus); if (sockets * cores * threads > max_cpus) { - fprintf(stderr, "cpu topology: error: " - "sockets (%u) * cores (%u) * threads (%u) > maxcpus (%u)\n", - sockets, cores, threads, max_cpus); + error_report("cpu topology: " + "sockets (%u) * cores (%u) * threads (%u) > " + "maxcpus (%u)", + sockets, cores, threads, max_cpus); exit(1); } @@ -1246,11 +1247,11 @@ static void smp_parse(QemuOpts *opts) } if (max_cpus > MAX_CPUMASK_BITS) { - fprintf(stderr, "Unsupported number of maxcpus\n"); + error_report("Unsupported number of maxcpus"); exit(1); } if (max_cpus < smp_cpus) { - fprintf(stderr, "maxcpus must be equal to or greater than smp\n"); + error_report("maxcpus must be equal to or greater than smp"); exit(1); } @@ -1260,7 +1261,7 @@ static void realtime_init(void) { if (enable_mlock) { if (os_mlock() < 0) { - fprintf(stderr, "qemu: locking memory failed\n"); + error_report("locking memory failed"); exit(1); } } @@ -1414,7 +1415,7 @@ static int usb_parse(const char *cmdline) int r; r = usb_device_add(cmdline); if (r < 0) { - fprintf(stderr, "qemu: could not add USB device '%s'\n", cmdline); + error_report("could not add USB device '%s'", cmdline); } return r; } @@ -1980,28 +1981,28 @@ static void select_vgahw (const char *p) if (vga_available()) { vga_interface_type = VGA_STD; } else { - fprintf(stderr, "Error: standard VGA not available\n"); + error_report("standard VGA not available"); exit(0); } } else if (strstart(p, "cirrus", &opts)) { if (cirrus_vga_available()) { vga_interface_type = VGA_CIRRUS; } else { - fprintf(stderr, "Error: Cirrus VGA not available\n"); + error_report("Cirrus VGA not available"); exit(0); } } else if (strstart(p, "vmware", &opts)) { if (vmware_vga_available()) { vga_interface_type = VGA_VMWARE; } else { - fprintf(stderr, "Error: VMWare SVGA not available\n"); + error_report("VMWare SVGA not available"); exit(0); } } else if (strstart(p, "virtio", &opts)) { if (virtio_vga_available()) { vga_interface_type = VGA_VIRTIO; } else { - fprintf(stderr, "Error: Virtio VGA not available\n"); + error_report("Virtio VGA not available"); exit(0); } } else if (strstart(p, "xenfb", &opts)) { @@ -2010,26 +2011,26 @@ static void select_vgahw (const char *p) if (qxl_vga_available()) { vga_interface_type = VGA_QXL; } else { - fprintf(stderr, "Error: QXL VGA not available\n"); + error_report("QXL VGA not available"); exit(0); } } else if (strstart(p, "tcx", &opts)) { if (tcx_vga_available()) { vga_interface_type = VGA_TCX; } else { - fprintf(stderr, "Error: TCX framebuffer not available\n"); + error_report("TCX framebuffer not available"); exit(0); } } else if (strstart(p, "cg3", &opts)) { if (cg3_vga_available()) { vga_interface_type = VGA_CG3; } else { - fprintf(stderr, "Error: CG3 framebuffer not available\n"); + error_report("CG3 framebuffer not available"); exit(0); } } else if (!strstart(p, "none", &opts)) { invalid_vga: - fprintf(stderr, "Unknown vga type: %s\n", p); + error_report("Unknown vga type: %s", p); exit(1); } while (*opts) { @@ -2349,7 +2350,7 @@ static int mon_init_func(void *opaque, QemuOpts *opts, Error **errp) } else if (strcmp(mode, "control") == 0) { flags = MONITOR_USE_CONTROL; } else { - fprintf(stderr, "unknown monitor mode \"%s\"\n", mode); + error_report("unknown monitor mode \"%s\"", mode); exit(1); } @@ -2362,7 +2363,7 @@ static int mon_init_func(void *opaque, QemuOpts *opts, Error **errp) chardev = qemu_opt_get(opts, "chardev"); chr = qemu_chr_find(chardev); if (chr == NULL) { - fprintf(stderr, "chardev \"%s\" not found\n", chardev); + error_report("chardev \"%s\" not found", chardev); exit(1); } @@ -2390,7 +2391,7 @@ static void monitor_parse(const char *optarg, const char *mode, bool pretty) } opts = qemu_chr_parse_compat(label, optarg); if (!opts) { - fprintf(stderr, "parse error: %s\n", optarg); + error_report("parse error: %s", optarg); exit(1); } } @@ -2464,14 +2465,14 @@ static int serial_parse(const char *devname) if (strcmp(devname, "none") == 0) return 0; if (index == MAX_SERIAL_PORTS) { - fprintf(stderr, "qemu: too many serial ports\n"); + error_report("too many serial ports"); exit(1); } snprintf(label, sizeof(label), "serial%d", index); serial_hds[index] = qemu_chr_new(label, devname, NULL); if (!serial_hds[index]) { - fprintf(stderr, "qemu: could not connect serial device" - " to character backend '%s'\n", devname); + error_report("could not connect serial device" + " to character backend '%s'", devname); return -1; } index++; @@ -2486,14 +2487,14 @@ static int parallel_parse(const char *devname) if (strcmp(devname, "none") == 0) return 0; if (index == MAX_PARALLEL_PORTS) { - fprintf(stderr, "qemu: too many parallel ports\n"); + error_report("too many parallel ports"); exit(1); } snprintf(label, sizeof(label), "parallel%d", index); parallel_hds[index] = qemu_chr_new(label, devname, NULL); if (!parallel_hds[index]) { - fprintf(stderr, "qemu: could not connect parallel device" - " to character backend '%s'\n", devname); + error_report("could not connect parallel device" + " to character backend '%s'", devname); return -1; } index++; @@ -2510,7 +2511,7 @@ static int virtcon_parse(const char *devname) if (strcmp(devname, "none") == 0) return 0; if (index == MAX_VIRTIO_CONSOLES) { - fprintf(stderr, "qemu: too many virtio consoles\n"); + error_report("too many virtio consoles"); exit(1); } @@ -2527,8 +2528,8 @@ static int virtcon_parse(const char *devname) snprintf(label, sizeof(label), "virtcon%d", index); virtcon_hds[index] = qemu_chr_new(label, devname, NULL); if (!virtcon_hds[index]) { - fprintf(stderr, "qemu: could not connect virtio console" - " to character backend '%s'\n", devname); + error_report("could not connect virtio console" + " to character backend '%s'", devname); return -1; } qemu_opt_set(dev_opts, "chardev", label, &error_abort); @@ -2548,7 +2549,7 @@ static int sclp_parse(const char *devname) return 0; } if (index == MAX_SCLP_CONSOLES) { - fprintf(stderr, "qemu: too many sclp consoles\n"); + error_report("too many sclp consoles"); exit(1); } @@ -2560,8 +2561,8 @@ static int sclp_parse(const char *devname) snprintf(label, sizeof(label), "sclpcon%d", index); sclp_hds[index] = qemu_chr_new(label, devname, NULL); if (!sclp_hds[index]) { - fprintf(stderr, "qemu: could not connect sclp console" - " to character backend '%s'\n", devname); + error_report("could not connect sclp console" + " to character backend '%s'", devname); return -1; } qemu_opt_set(dev_opts, "chardev", label, &error_abort); @@ -2579,7 +2580,7 @@ static int debugcon_parse(const char *devname) } opts = qemu_opts_create(qemu_find_opts("device"), "debugcon", 1, NULL); if (!opts) { - fprintf(stderr, "qemu: already have a debugcon device\n"); + error_report("already have a debugcon device"); exit(1); } qemu_opt_set(opts, "driver", "isa-debugcon", &error_abort); @@ -3005,8 +3006,7 @@ int main(int argc, char **argv, char **envp) runstate_init(); if (qcrypto_init(&err) < 0) { - fprintf(stderr, "Cannot initialize crypto: %s\n", - error_get_pretty(err)); + error_report("Cannot initialize crypto: %s", error_get_pretty(err)); exit(1); } rtc_clock = QEMU_CLOCK_HOST; @@ -3164,7 +3164,7 @@ int main(int argc, char **argv, char **envp) } } else if (*p != '\0') { chs_fail: - fprintf(stderr, "qemu: invalid physical CHS format\n"); + error_report("invalid physical CHS format"); exit(1); } if (hda_opts != NULL) { @@ -3207,7 +3207,7 @@ int main(int argc, char **argv, char **envp) #ifdef CONFIG_CURSES display_type = DT_CURSES; #else - fprintf(stderr, "Curses support is disabled\n"); + error_report("Curses support is disabled"); exit(1); #endif break; @@ -3218,8 +3218,7 @@ int main(int argc, char **argv, char **envp) graphic_rotate = strtol(optarg, (char **) &optarg, 10); if (graphic_rotate != 0 && graphic_rotate != 90 && graphic_rotate != 180 && graphic_rotate != 270) { - fprintf(stderr, - "qemu: only 90, 180, 270 deg rotation is available\n"); + error_report("only 90, 180, 270 deg rotation is available"); exit(1); } break; @@ -3370,7 +3369,7 @@ int main(int argc, char **argv, char **envp) w = strtol(p, (char **)&p, 10); if (w <= 0) { graphic_error: - fprintf(stderr, "qemu: invalid resolution or depth\n"); + error_report("invalid resolution or depth"); exit(1); } if (*p != 'x') @@ -3436,7 +3435,7 @@ int main(int argc, char **argv, char **envp) case QEMU_OPTION_fsdev: olist = qemu_find_opts("fsdev"); if (!olist) { - fprintf(stderr, "fsdev is not supported by this qemu build.\n"); + error_report("fsdev is not supported by this qemu build."); exit(1); } opts = qemu_opts_parse_noisily(olist, optarg, true); @@ -3451,7 +3450,7 @@ int main(int argc, char **argv, char **envp) olist = qemu_find_opts("virtfs"); if (!olist) { - fprintf(stderr, "virtfs is not supported by this qemu build.\n"); + error_report("virtfs is not supported by this qemu build."); exit(1); } opts = qemu_opts_parse_noisily(olist, optarg, true); @@ -3461,15 +3460,15 @@ int main(int argc, char **argv, char **envp) if (qemu_opt_get(opts, "fsdriver") == NULL || qemu_opt_get(opts, "mount_tag") == NULL) { - fprintf(stderr, "Usage: -virtfs fsdriver,mount_tag=tag.\n"); + error_report("Usage: -virtfs fsdriver,mount_tag=tag."); exit(1); } fsdev = qemu_opts_create(qemu_find_opts("fsdev"), qemu_opt_get(opts, "mount_tag"), 1, NULL); if (!fsdev) { - fprintf(stderr, "duplicate fsdev id: %s\n", - qemu_opt_get(opts, "mount_tag")); + error_report("duplicate fsdev id: %s", + qemu_opt_get(opts, "mount_tag")); exit(1); } @@ -3478,8 +3477,7 @@ int main(int argc, char **argv, char **envp) #ifdef CONFIG_SYNC_FILE_RANGE qemu_opt_set(fsdev, "writeout", writeout, &error_abort); #else - fprintf(stderr, "writeout=immediate not supported on " - "this platform\n"); + error_report("writeout=immediate not supported on this platform"); exit(1); #endif } @@ -3518,7 +3516,7 @@ int main(int argc, char **argv, char **envp) fsdev = qemu_opts_create(qemu_find_opts("fsdev"), "v_synth", 1, NULL); if (!fsdev) { - fprintf(stderr, "duplicate option: %s\n", "virtfs_synth"); + error_report("duplicate option: %s", "virtfs_synth"); exit(1); } qemu_opt_set(fsdev, "fsdriver", "synth", &error_abort); @@ -3539,15 +3537,14 @@ int main(int argc, char **argv, char **envp) break; case QEMU_OPTION_watchdog: if (watchdog) { - fprintf(stderr, - "qemu: only one watchdog option may be given\n"); + error_report("only one watchdog option may be given"); return 1; } watchdog = optarg; break; case QEMU_OPTION_watchdog_action: if (select_watchdog_action(optarg) == -1) { - fprintf(stderr, "Unknown -watchdog-action parameter\n"); + error_report("Unknown -watchdog-action parameter"); exit(1); } break; @@ -3591,7 +3588,7 @@ int main(int argc, char **argv, char **envp) display_type = DT_SDL; break; #else - fprintf(stderr, "SDL support is disabled\n"); + error_report("SDL support is disabled"); exit(1); #endif case QEMU_OPTION_pidfile: @@ -3653,8 +3650,8 @@ int main(int argc, char **argv, char **envp) qemu_opts_parse_noisily(olist, "accel=tcg", false); break; case QEMU_OPTION_no_kvm_pit: { - fprintf(stderr, "Warning: KVM PIT can no longer be disabled " - "separately.\n"); + error_report("Warning: KVM PIT can no longer be disabled " + "separately."); break; } case QEMU_OPTION_no_kvm_pit_reinjection: { @@ -3667,8 +3664,8 @@ int main(int argc, char **argv, char **envp) { /* end of list */ } }; - fprintf(stderr, "Warning: option deprecated, use " - "lost_tick_policy property of kvm-pit instead.\n"); + error_report("Warning: option deprecated, use " + "lost_tick_policy property of kvm-pit instead."); qdev_prop_register_global_list(kvm_pit_lost_tick_policy); break; } @@ -3703,7 +3700,7 @@ int main(int argc, char **argv, char **envp) exit(1); } #else - fprintf(stderr, "VNC support is disabled\n"); + error_report("VNC support is disabled"); exit(1); #endif break; @@ -3716,7 +3713,7 @@ int main(int argc, char **argv, char **envp) break; case QEMU_OPTION_balloon: if (balloon_parse(optarg) < 0) { - fprintf(stderr, "Unknown -balloon argument %s\n", optarg); + error_report("Unknown -balloon argument %s", optarg); exit(1); } break; @@ -3731,15 +3728,15 @@ int main(int argc, char **argv, char **envp) break; case QEMU_OPTION_uuid: if(qemu_uuid_parse(optarg, qemu_uuid) < 0) { - fprintf(stderr, "Fail to parse UUID string." - " Wrong format.\n"); + error_report("Fail to parse UUID string." + " Wrong format."); exit(1); } qemu_uuid_set = true; break; case QEMU_OPTION_option_rom: if (nb_option_roms >= MAX_OPTION_ROMS) { - fprintf(stderr, "Too many option ROMs\n"); + error_report("Too many option ROMs"); exit(1); } opts = qemu_opts_parse_noisily(qemu_find_opts("option-rom"), @@ -3751,7 +3748,7 @@ int main(int argc, char **argv, char **envp) option_rom[nb_option_roms].bootindex = qemu_opt_get_number(opts, "bootindex", -1); if (!option_rom[nb_option_roms].name) { - fprintf(stderr, "Option ROM file is not specified\n"); + error_report("Option ROM file is not specified"); exit(1); } nb_option_roms++; @@ -3776,9 +3773,8 @@ int main(int argc, char **argv, char **envp) } else if (strcmp("auto", target) == 0) { semihosting.target = SEMIHOSTING_TARGET_AUTO; } else { - fprintf(stderr, "Unsupported semihosting-config" - " %s\n", - optarg); + error_report("Unsupported semihosting-config %s", + optarg); exit(1); } } else { @@ -3788,14 +3784,14 @@ int main(int argc, char **argv, char **envp) qemu_opt_foreach(opts, add_semihosting_arg, &semihosting, NULL); } else { - fprintf(stderr, "Unsupported semihosting-config %s\n", - optarg); + error_report("Unsupported semihosting-config %s", + optarg); exit(1); } break; case QEMU_OPTION_tdf: - fprintf(stderr, "Warning: user space PIT time drift fix " - "is no longer supported.\n"); + error_report("Warning: user space PIT time drift fix " + "is no longer supported."); break; case QEMU_OPTION_name: opts = qemu_opts_parse_noisily(qemu_find_opts("name"), @@ -3806,7 +3802,7 @@ int main(int argc, char **argv, char **envp) break; case QEMU_OPTION_prom_env: if (nb_prom_envs >= MAX_PROM_ENVS) { - fprintf(stderr, "Too many prom variables\n"); + error_report("Too many prom variables"); exit(1); } prom_envs[nb_prom_envs] = optarg; @@ -3889,8 +3885,8 @@ int main(int argc, char **argv, char **envp) { int ret = qemu_read_config_file(optarg); if (ret < 0) { - fprintf(stderr, "read config %s: %s\n", optarg, - strerror(-ret)); + error_report("read config %s: %s", optarg, + strerror(-ret)); exit(1); } break; @@ -3898,7 +3894,7 @@ int main(int argc, char **argv, char **envp) case QEMU_OPTION_spice: olist = qemu_find_opts("spice"); if (!olist) { - fprintf(stderr, "spice is not supported by this qemu build.\n"); + error_report("spice is not supported by this qemu build."); exit(1); } opts = qemu_opts_parse_noisily(olist, optarg, false); @@ -3915,7 +3911,7 @@ int main(int argc, char **argv, char **envp) } else { fp = fopen(optarg, "w"); if (fp == NULL) { - fprintf(stderr, "open %s: %s\n", optarg, strerror(errno)); + error_report("open %s: %s", optarg, strerror(errno)); exit(1); } } @@ -3976,13 +3972,13 @@ int main(int argc, char **argv, char **envp) break; case QEMU_OPTION_dump_vmstate: if (vmstate_dump_file) { - fprintf(stderr, "qemu: only one '-dump-vmstate' " - "option may be given\n"); + error_report("only one '-dump-vmstate' " + "option may be given"); exit(1); } vmstate_dump_file = fopen(optarg, "w"); if (vmstate_dump_file == NULL) { - fprintf(stderr, "open %s: %s\n", optarg, strerror(errno)); + error_report("open %s: %s", optarg, strerror(errno)); exit(1); } break; @@ -3999,8 +3995,8 @@ int main(int argc, char **argv, char **envp) } if (machine_class == NULL) { - fprintf(stderr, "No machine specified, and there is no default.\n" - "Use -machine help to list supported machines!\n"); + error_report("No machine specified, and there is no default.\n" + "Use -machine help to list supported machines!"); exit(1); } @@ -4101,9 +4097,9 @@ int main(int argc, char **argv, char **envp) machine_class->max_cpus = machine_class->max_cpus ?: 1; /* Default to UP */ if (max_cpus > machine_class->max_cpus) { - fprintf(stderr, "Number of SMP CPUs requested (%d) exceeds max CPUs " - "supported by machine '%s' (%d)\n", max_cpus, - machine_class->name, machine_class->max_cpus); + error_report("Number of SMP CPUs requested (%d) exceeds max CPUs " + "supported by machine '%s' (%d)", max_cpus, + machine_class->name, machine_class->max_cpus); exit(1); } @@ -4164,12 +4160,12 @@ int main(int argc, char **argv, char **envp) if (display_type == DT_NOGRAPHIC && (default_parallel || default_serial || default_monitor || default_virtcon)) { - fprintf(stderr, "-nographic can not be used with -daemonize\n"); + error_report("-nographic can not be used with -daemonize"); exit(1); } #ifdef CONFIG_CURSES if (display_type == DT_CURSES) { - fprintf(stderr, "curses display can not be used with -daemonize\n"); + error_report("curses display can not be used with -daemonize"); exit(1); } #endif @@ -4228,12 +4224,12 @@ int main(int argc, char **argv, char **envp) } if ((no_frame || alt_grab || ctrl_grab) && display_type != DT_SDL) { - fprintf(stderr, "-no-frame, -alt-grab and -ctrl-grab are only valid " - "for SDL, ignoring option\n"); + error_report("-no-frame, -alt-grab and -ctrl-grab are only valid " + "for SDL, ignoring option"); } if (no_quit && (display_type != DT_GTK && display_type != DT_SDL)) { - fprintf(stderr, "-no-quit is only valid for GTK and SDL, " - "ignoring option\n"); + error_report("-no-quit is only valid for GTK and SDL, " + "ignoring option"); } #if defined(CONFIG_GTK) @@ -4248,9 +4244,9 @@ int main(int argc, char **argv, char **envp) #endif if (request_opengl == 1 && display_opengl == 0) { #if defined(CONFIG_OPENGL) - fprintf(stderr, "OpenGL is not supported by the display.\n"); + error_report("OpenGL is not supported by the display."); #else - fprintf(stderr, "QEMU was built without opengl support.\n"); + error_report("QEMU was built without opengl support."); #endif exit(1); } @@ -4276,7 +4272,7 @@ int main(int argc, char **argv, char **envp) #endif if (pid_file && qemu_create_pidfile(pid_file) != 0) { - fprintf(stderr, "Could not acquire pid file: %s\n", strerror(errno)); + error_report("Could not acquire pid file: %s", strerror(errno)); exit(1); } @@ -4347,17 +4343,17 @@ int main(int argc, char **argv, char **envp) linux_boot = (kernel_filename != NULL); if (!linux_boot && *kernel_cmdline != '\0') { - fprintf(stderr, "-append only allowed with -kernel option\n"); + error_report("-append only allowed with -kernel option"); exit(1); } if (!linux_boot && initrd_filename != NULL) { - fprintf(stderr, "-initrd only allowed with -kernel option\n"); + error_report("-initrd only allowed with -kernel option"); exit(1); } if (!linux_boot && qemu_opt_get(machine_opts, "dtb")) { - fprintf(stderr, "-dtb only allowed with -kernel option\n"); + error_report("-dtb only allowed with -kernel option"); exit(1); } @@ -4376,7 +4372,7 @@ int main(int argc, char **argv, char **envp) cpu_ticks_init(); if (icount_opts) { if (kvm_enabled() || xen_enabled()) { - fprintf(stderr, "-icount is not allowed with kvm or xen\n"); + error_report("-icount is not allowed with kvm or xen"); exit(1); } configure_icount(icount_opts, &error_abort); @@ -4409,7 +4405,7 @@ int main(int argc, char **argv, char **envp) if (!xen_enabled()) { /* On 32-bit hosts, QEMU is limited by virtual address space */ if (ram_size > (2047 << 20) && HOST_LONG_BITS == 32) { - fprintf(stderr, "qemu: at most 2047 MB RAM can be simulated\n"); + error_report("at most 2047 MB RAM can be simulated"); exit(1); } } @@ -4596,7 +4592,7 @@ int main(int argc, char **argv, char **envp) qemu_run_machine_init_done_notifiers(); if (rom_check_and_register_reset() != 0) { - fprintf(stderr, "rom check and register reset failed\n"); + error_report("rom check and register reset failed"); exit(1); } -- 2.1.0