Instead of covering only the state of images on the migration
destination before the migration is completed, the flag will also cover
the state of images on the migration source after completion. This
common state implies that the image is technically still open, but no
writes will happen and any cached contents will be reloaded from disk if
and when the image leaves this state.
Signed-off-by: Kevin Wolf <kw...@redhat.com>
---
block.c | 10 +++++-----
block/io.c | 4 ++--
block/qcow2.c | 6 +++---
block/qed.c | 4 ++--
include/block/block.h | 2 +-
nbd.c | 2 +-
6 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/block.c b/block.c
index ee9d7ea..7fbf74d 100644
--- a/block.c
+++ b/block.c
@@ -1191,7 +1191,7 @@ static int bdrv_fill_options(QDict **options, const char
*filename,
}
if (runstate_check(RUN_STATE_INMIGRATE)) {
- *flags |= BDRV_O_INCOMING;
+ *flags |= BDRV_O_INACTIVE;
}
return 0;
@@ -3265,10 +3265,10 @@ void bdrv_invalidate_cache(BlockDriverState *bs, Error
**errp)
return;
}
- if (!(bs->open_flags & BDRV_O_INCOMING)) {
+ if (!(bs->open_flags & BDRV_O_INACTIVE)) {
return;
}
- bs->open_flags &= ~BDRV_O_INCOMING;
+ bs->open_flags &= ~BDRV_O_INACTIVE;
if (bs->drv->bdrv_invalidate_cache) {
bs->drv->bdrv_invalidate_cache(bs, &local_err);
@@ -3276,14 +3276,14 @@ void bdrv_invalidate_cache(BlockDriverState *bs, Error
**errp)
bdrv_invalidate_cache(bs->file->bs, &local_err);
}
if (local_err) {
- bs->open_flags |= BDRV_O_INCOMING;
+ bs->open_flags |= BDRV_O_INACTIVE;
error_propagate(errp, local_err);
return;
}
ret = refresh_total_sectors(bs, bs->total_sectors);
if (ret < 0) {
- bs->open_flags |= BDRV_O_INCOMING;
+ bs->open_flags |= BDRV_O_INACTIVE;
error_setg_errno(errp, -ret, "Could not refresh total sector count");
return;
}
diff --git a/block/io.c b/block/io.c
index 2f19f61..0129456 100644
--- a/block/io.c
+++ b/block/io.c
@@ -1300,7 +1300,7 @@ static int coroutine_fn
bdrv_co_do_pwritev(BlockDriverState *bs,
if (bs->read_only) {
return -EPERM;
}
- assert(!(bs->open_flags & BDRV_O_INCOMING));
+ assert(!(bs->open_flags & BDRV_O_INACTIVE));
ret = bdrv_check_byte_request(bs, offset, bytes);
if (ret < 0) {
@@ -2462,7 +2462,7 @@ int coroutine_fn bdrv_co_discard(BlockDriverState *bs,
int64_t sector_num,
} else if (bs->read_only) {
return -EPERM;
}
- assert(!(bs->open_flags & BDRV_O_INCOMING));
+ assert(!(bs->open_flags & BDRV_O_INACTIVE));
/* Do nothing if disabled. */
if (!(bs->open_flags & BDRV_O_UNMAP)) {
diff --git a/block/qcow2.c b/block/qcow2.c
index 01f1fe3..9e4abf3 100644
--- a/block/qcow2.c
+++ b/block/qcow2.c
@@ -1140,7 +1140,7 @@ static int qcow2_open(BlockDriverState *bs, QDict
*options, int flags,
}
/* Clear unknown autoclear feature bits */
- if (!bs->read_only && !(flags & BDRV_O_INCOMING) && s->autoclear_features)
{
+ if (!bs->read_only && !(flags & BDRV_O_INACTIVE) && s->autoclear_features)
{
s->autoclear_features = 0;
ret = qcow2_update_header(bs);
if (ret < 0) {
@@ -1153,7 +1153,7 @@ static int qcow2_open(BlockDriverState *bs, QDict
*options, int flags,
qemu_co_mutex_init(&s->lock);
/* Repair image if dirty */
- if (!(flags & (BDRV_O_CHECK | BDRV_O_INCOMING)) && !bs->read_only &&
+ if (!(flags & (BDRV_O_CHECK | BDRV_O_INACTIVE)) && !bs->read_only &&
(s->incompatible_features & QCOW2_INCOMPAT_DIRTY)) {
BdrvCheckResult result = {0};
@@ -1692,7 +1692,7 @@ static void qcow2_close(BlockDriverState *bs)
/* else pre-write overlap checks in cache_destroy may crash */
s->l1_table = NULL;
- if (!(bs->open_flags & BDRV_O_INCOMING)) {
+ if (!(bs->open_flags & BDRV_O_INACTIVE)) {
int ret1, ret2;
ret1 = qcow2_cache_flush(bs, s->l2_table_cache);
diff --git a/block/qed.c b/block/qed.c
index 9b88895..63185b5 100644
--- a/block/qed.c
+++ b/block/qed.c
@@ -477,7 +477,7 @@ static int bdrv_qed_open(BlockDriverState *bs, QDict
*options, int flags,
* feature is no longer valid.
*/
if ((s->header.autoclear_features & ~QED_AUTOCLEAR_FEATURE_MASK) != 0 &&
- !bdrv_is_read_only(bs->file->bs) && !(flags & BDRV_O_INCOMING)) {
+ !bdrv_is_read_only(bs->file->bs) && !(flags & BDRV_O_INACTIVE)) {
s->header.autoclear_features &= QED_AUTOCLEAR_FEATURE_MASK;
ret = qed_write_header_sync(s);
@@ -505,7 +505,7 @@ static int bdrv_qed_open(BlockDriverState *bs, QDict
*options, int flags,
* aid data recovery from an otherwise inconsistent image.
*/
if (!bdrv_is_read_only(bs->file->bs) &&
- !(flags & BDRV_O_INCOMING)) {
+ !(flags & BDRV_O_INACTIVE)) {
BdrvCheckResult result = {0};
ret = qed_check(s, &result, true);
diff --git a/include/block/block.h b/include/block/block.h
index c96923d..2b7d33c 100644
--- a/include/block/block.h
+++ b/include/block/block.h
@@ -84,7 +84,7 @@ typedef struct HDGeometry {
#define BDRV_O_NO_BACKING 0x0100 /* don't open the backing file */
#define BDRV_O_NO_FLUSH 0x0200 /* disable flushing on this disk */
#define BDRV_O_COPY_ON_READ 0x0400 /* copy read backing sectors into image */
-#define BDRV_O_INCOMING 0x0800 /* consistency hint for incoming migration
*/
+#define BDRV_O_INACTIVE 0x0800 /* consistency hint for migration handoff */
#define BDRV_O_CHECK 0x1000 /* open solely for consistency check */
#define BDRV_O_ALLOW_RDWR 0x2000 /* allow reopen to change from r/o to r/w */
#define BDRV_O_UNMAP 0x4000 /* execute guest UNMAP/TRIM operations */
diff --git a/nbd.c b/nbd.c
index b3d9654..2faa2a0 100644
--- a/nbd.c
+++ b/nbd.c
@@ -1077,7 +1077,7 @@ NBDExport *nbd_export_new(BlockBackend *blk, off_t
dev_offset, off_t size,
blk_add_aio_context_notifier(blk, blk_aio_attached, blk_aio_detach, exp);
/*
* NBD exports are used for non-shared storage migration. Make sure
- * that BDRV_O_INCOMING is cleared and the image is ready for write
+ * that BDRV_O_INACTIVE is cleared and the image is ready for write
* access since the export could be available before migration handover.
*/
blk_invalidate_cache(blk, NULL);
--
1.8.3.1
