[Qemu-devel] virtio-scsi/blk dataplane and guest memory allocation

[Roy Shterman]

Hi,

I have two questions,

First, I'm developing for Libiscsi and trying to work with virtio-scsi
dataplane or even virtio-blk dataplane and it doesn't works well.

I'm working with latest qemu and latest Libiscsi in RedHat 7 libvirt
package.

my iscsi xml part is :

virtio-blk -

    <disk type='network' device='lun'>
      <driver name='qemu' type='raw'/>
      <source protocol='iscsi' name='iqn.2001-04.com.r-dcs03-tgt-3/1'>
        <host name='11.212.32.52' port='3260'/>
      </source>
      <target dev='vdb' bus='virtio'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x07'
function='0x0'/>
    </disk>

virtio-scsi -

    <disk type='network' device='lun'>
      <driver name='qemu' type='raw'/>
      <source protocol='iscsi' name='iqn.2001-04.com.r-dcs03-tgt-1/1>
        <host name='11.212.32.52' port='3260'/>
      </source>
      <target dev='sda' bus='scsi'/>
      <address type='drive' controller='0' bus='0' target='0' unit='0'/>
    </disk>
    <controller type='scsi' index='0' model='virtio-scsi'>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x06'
function='0x0'/>
    </controller>

I tried to add this code outdise of <devices> in my xml :

  <qemu:commandline>
    <qemu:arg value='-set'/>
    <qemu:arg value='device.virtio-disk0.scsi=off'/>
  </qemu:commandline>
  <!-- config-wce=off is not needed in RHEL 6.4 -->
  <qemu:commandline>
    <qemu:arg value='-set'/>
    <qemu:arg value='device.virtio-disk0.config-wce=off'/>
  </qemu:commandline>
  <qemu:commandline>
    <qemu:arg value='-set'/>
    <qemu:arg value='device.virtio-disk0.x-data-plane=on'/>
  </qemu:commandline>

and nothing happened, can you think of something i'm missing?

second thing, I'm trying to look for the code where QEMU allocate all
guest memory (2 GB) in my case.

Thanks,

Roy