This sits behind the mailbox interface, and implements
request/response queries for system properties. The
framebuffer-related properties will be added in a later patch.
Reviewed-by: Peter Crosthwaite <crosthwaite.pe...@gmail.com>
Signed-off-by: Andrew Baumann <andrew.baum...@microsoft.com>
---
Notes:
v5:
* minor style tweak
v4:
* added LOG_UNIMP as appropriate
* use qemu_macaddr_default_if_unset to allocate a MAC address, and
dma_memory_write to write it
* assert that we're not pending, rather than dropping a request on the floor
hw/misc/Makefile.objs | 1 +
hw/misc/bcm2835_property.c | 287 +++++++++++++++++++++++++++++++++++++
include/hw/misc/bcm2835_property.h | 31 ++++
3 files changed, 319 insertions(+)
create mode 100644 hw/misc/bcm2835_property.c
create mode 100644 include/hw/misc/bcm2835_property.h
diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs
index d0ea105..ea6cd3c 100644
--- a/hw/misc/Makefile.objs
+++ b/hw/misc/Makefile.objs
@@ -37,6 +37,7 @@ obj-$(CONFIG_OMAP) += omap_l4.o
obj-$(CONFIG_OMAP) += omap_sdrc.o
obj-$(CONFIG_OMAP) += omap_tap.o
obj-$(CONFIG_RASPI) += bcm2835_mbox.o
+obj-$(CONFIG_RASPI) += bcm2835_property.o
obj-$(CONFIG_SLAVIO) += slavio_misc.o
obj-$(CONFIG_ZYNQ) += zynq_slcr.o
obj-$(CONFIG_ZYNQ) += zynq-xadc.o
diff --git a/hw/misc/bcm2835_property.c b/hw/misc/bcm2835_property.c
new file mode 100644
index 0000000..e42b43e
--- /dev/null
+++ b/hw/misc/bcm2835_property.c
@@ -0,0 +1,287 @@
+/*
+ * Raspberry Pi emulation (c) 2012 Gregory Estrade
+ * This code is licensed under the GNU GPLv2 and later.
+ */
+
+#include "hw/misc/bcm2835_property.h"
+#include "hw/misc/bcm2835_mbox_defs.h"
+#include "sysemu/dma.h"
+
+/* https://github.com/raspberrypi/firmware/wiki/Mailbox-property-interface */
+
+static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value)
+{
+ uint32_t tag;
+ uint32_t bufsize;
+ uint32_t tot_len;
+ size_t resplen;
+ uint32_t tmp;
+
+ value &= ~0xf;
+
+ s->addr = value;
+
+ tot_len = ldl_phys(&s->dma_as, value);
+
+ /* @(addr + 4) : Buffer response code */
+ value = s->addr + 8;
+ while (value + 8 <= s->addr + tot_len) {
+ tag = ldl_phys(&s->dma_as, value);
+ bufsize = ldl_phys(&s->dma_as, value + 4);
+ /* @(value + 8) : Request/response indicator */
+ resplen = 0;
+ switch (tag) {
+ case 0x00000000: /* End tag */
+ break;
+ case 0x00000001: /* Get firmware revision */
+ stl_phys(&s->dma_as, value + 12, 346337);
+ resplen = 4;
+ break;
+ case 0x00010001: /* Get board model */
+ qemu_log_mask(LOG_UNIMP,
+ "bcm2835_property: %x get board model NYI\n", tag);
+ resplen = 4;
+ break;
+ case 0x00010002: /* Get board revision */
+ qemu_log_mask(LOG_UNIMP,
+ "bcm2835_property: %x get board revision NYI\n",
tag);
+ resplen = 4;
+ break;
+ case 0x00010003: /* Get board MAC address */
+ resplen = sizeof(s->macaddr.a);
+ dma_memory_write(&s->dma_as, value + 12, s->macaddr.a, resplen);
+ break;
+ case 0x00010004: /* Get board serial */
+ qemu_log_mask(LOG_UNIMP,
+ "bcm2835_property: %x get board serial NYI\n", tag);
+ resplen = 8;
+ break;
+ case 0x00010005: /* Get ARM memory */
+ /* base */
+ stl_phys(&s->dma_as, value + 12, 0);
+ /* size */
+ stl_phys(&s->dma_as, value + 16, s->ram_size);
+ resplen = 8;
+ break;
+ case 0x00028001: /* Set power state */
+ /* Assume that whatever device they asked for exists,
+ * and we'll just claim we set it to the desired state
+ */
+ tmp = ldl_phys(&s->dma_as, value + 16);
+ stl_phys(&s->dma_as, value + 16, (tmp & 1));
+ resplen = 8;
+ break;
+
+ /* Clocks */
+
+ case 0x00030001: /* Get clock state */
+ stl_phys(&s->dma_as, value + 16, 0x1);
+ resplen = 8;
+ break;
+
+ case 0x00038001: /* Set clock state */
+ qemu_log_mask(LOG_UNIMP,
+ "bcm2835_property: %x set clock state NYI\n", tag);
+ resplen = 8;
+ break;
+
+ case 0x00030002: /* Get clock rate */
+ case 0x00030004: /* Get max clock rate */
+ case 0x00030007: /* Get min clock rate */
+ switch (ldl_phys(&s->dma_as, value + 12)) {
+ case 1: /* EMMC */
+ stl_phys(&s->dma_as, value + 16, 50000000);
+ break;
+ case 2: /* UART */
+ stl_phys(&s->dma_as, value + 16, 3000000);
+ break;
+ default:
+ stl_phys(&s->dma_as, value + 16, 700000000);
+ break;
+ }
+ resplen = 8;
+ break;
+
+ case 0x00038002: /* Set clock rate */
+ case 0x00038004: /* Set max clock rate */
+ case 0x00038007: /* Set min clock rate */
+ qemu_log_mask(LOG_UNIMP,
+ "bcm2835_property: %x set clock rates NYI\n", tag);
+ resplen = 8;
+ break;
+
+ /* Temperature */
+
+ case 0x00030006: /* Get temperature */
+ stl_phys(&s->dma_as, value + 16, 25000);
+ resplen = 8;
+ break;
+
+ case 0x0003000A: /* Get max temperature */
+ stl_phys(&s->dma_as, value + 16, 99000);
+ resplen = 8;
+ break;
+
+
+ case 0x00060001: /* Get DMA channels */
+ /* channels 2-5 */
+ stl_phys(&s->dma_as, value + 12, 0x003C);
+ resplen = 4;
+ break;
+
+ case 0x00050001: /* Get command line */
+ resplen = 0;
+ break;
+
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "bcm2835_property: unhandled tag %08x\n", tag);
+ break;
+ }
+
+ if (tag == 0) {
+ break;
+ }
+
+ stl_phys(&s->dma_as, value + 8, (1 << 31) | resplen);
+ value += bufsize + 12;
+ }
+
+ /* Buffer response code */
+ stl_phys(&s->dma_as, s->addr + 4, (1 << 31));
+}
+
+static uint64_t bcm2835_property_read(void *opaque, hwaddr offset,
+ unsigned size)
+{
+ BCM2835PropertyState *s = opaque;
+ uint32_t res = 0;
+
+ switch (offset) {
+ case MBOX_AS_DATA:
+ res = MBOX_CHAN_PROPERTY | s->addr;
+ s->pending = false;
+ qemu_set_irq(s->mbox_irq, 0);
+ break;
+
+ case MBOX_AS_PENDING:
+ res = s->pending;
+ break;
+
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n",
+ __func__, offset);
+ return 0;
+ }
+
+ return res;
+}
+
+static void bcm2835_property_write(void *opaque, hwaddr offset,
+ uint64_t value, unsigned size)
+{
+ BCM2835PropertyState *s = opaque;
+
+ switch (offset) {
+ case MBOX_AS_DATA:
+ /* bcm2835_mbox should check our pending status before pushing */
+ assert(!s->pending);
+ s->pending = true;
+ bcm2835_property_mbox_push(s, value);
+ qemu_set_irq(s->mbox_irq, 1);
+ break;
+
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n",
+ __func__, offset);
+ return;
+ }
+}
+
+static const MemoryRegionOps bcm2835_property_ops = {
+ .read = bcm2835_property_read,
+ .write = bcm2835_property_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+ .valid.min_access_size = 4,
+ .valid.max_access_size = 4,
+};
+
+static const VMStateDescription vmstate_bcm2835_property = {
+ .name = TYPE_BCM2835_PROPERTY,
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_MACADDR(macaddr, BCM2835PropertyState),
+ VMSTATE_UINT32(addr, BCM2835PropertyState),
+ VMSTATE_BOOL(pending, BCM2835PropertyState),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static void bcm2835_property_init(Object *obj)
+{
+ BCM2835PropertyState *s = BCM2835_PROPERTY(obj);
+
+ memory_region_init_io(&s->iomem, OBJECT(s), &bcm2835_property_ops, s,
+ TYPE_BCM2835_PROPERTY, 0x10);
+ sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->iomem);
+ sysbus_init_irq(SYS_BUS_DEVICE(s), &s->mbox_irq);
+}
+
+static void bcm2835_property_reset(DeviceState *dev)
+{
+ BCM2835PropertyState *s = BCM2835_PROPERTY(dev);
+
+ s->pending = false;
+}
+
+static void bcm2835_property_realize(DeviceState *dev, Error **errp)
+{
+ BCM2835PropertyState *s = BCM2835_PROPERTY(dev);
+ Object *obj;
+ Error *err = NULL;
+
+ obj = object_property_get_link(OBJECT(dev), "dma-mr", &err);
+ if (obj == NULL) {
+ error_setg(errp, "%s: required dma-mr link not found: %s",
+ __func__, error_get_pretty(err));
+ return;
+ }
+
+ s->dma_mr = MEMORY_REGION(obj);
+ address_space_init(&s->dma_as, s->dma_mr, NULL);
+
+ /* TODO: connect to MAC address of USB NIC device, once we emulate it */
+ qemu_macaddr_default_if_unset(&s->macaddr);
+
+ bcm2835_property_reset(dev);
+}
+
+static Property bcm2835_property_props[] = {
+ DEFINE_PROP_UINT32("ram-size", BCM2835PropertyState, ram_size, 0),
+ DEFINE_PROP_END_OF_LIST()
+};
+
+static void bcm2835_property_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->props = bcm2835_property_props;
+ dc->realize = bcm2835_property_realize;
+ dc->vmsd = &vmstate_bcm2835_property;
+}
+
+static TypeInfo bcm2835_property_info = {
+ .name = TYPE_BCM2835_PROPERTY,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(BCM2835PropertyState),
+ .class_init = bcm2835_property_class_init,
+ .instance_init = bcm2835_property_init,
+};
+
+static void bcm2835_property_register_types(void)
+{
+ type_register_static(&bcm2835_property_info);
+}
+
+type_init(bcm2835_property_register_types)
diff --git a/include/hw/misc/bcm2835_property.h
b/include/hw/misc/bcm2835_property.h
new file mode 100644
index 0000000..fcf5f3d
--- /dev/null
+++ b/include/hw/misc/bcm2835_property.h
@@ -0,0 +1,31 @@
+/*
+ * Raspberry Pi emulation (c) 2012 Gregory Estrade
+ * This code is licensed under the GNU GPLv2 and later.
+ */
+
+#ifndef BCM2835_PROPERTY_H
+#define BCM2835_PROPERTY_H
+
+#include "hw/sysbus.h"
+#include "exec/address-spaces.h"
+#include "net/net.h"
+
+#define TYPE_BCM2835_PROPERTY "bcm2835-property"
+#define BCM2835_PROPERTY(obj) \
+ OBJECT_CHECK(BCM2835PropertyState, (obj), TYPE_BCM2835_PROPERTY)
+
+typedef struct {
+ /*< private >*/
+ SysBusDevice busdev;
+ /*< public >*/
+ MemoryRegion *dma_mr;
+ AddressSpace dma_as;
+ MemoryRegion iomem;
+ qemu_irq mbox_irq;
+ MACAddr macaddr;
+ uint32_t ram_size;
+ uint32_t addr;
+ bool pending;
+} BCM2835PropertyState;
+
+#endif
--
2.5.3
